PROVN OF TRAINING SHEDS FOR ASC CENTRE (NORTH) - 1 ATC UNDER GE (CENTRAL) BANGALORE

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in Soft/loose soil complete all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, well, cesspits, manholes, peir holes,for laying of cables/errection of poles/stay assembly etc. n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 ( using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for hardcore or gauge of broken stone or boulders n.exc 63mm, deposited spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for Pre-cast cement concrete block (1:3:6) type C1 (using 20mm graded crushed stone aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) type D2 ( using 40 mm graded crushed stone aggr)in sub base, floor.complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20 to 25mm thick laid over 20mm thick screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing upto and including mirror finish complete all as specified and as directed.

M&L for Machine cut Kota stone slab flooring 20 to 25mm thick in steps, skirting and dado over and including 15mm thick backing coat in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing upto and including mirror finish complete all as specified and as directed.

M & L for RCC design mix (M-25 ) using 20mm graded stone aggregate for foundation footings, plinth beams, columns up to GL etc complete all as specified and as directed.(Note : Reinforcement shall be measured and paid seperately under relevant item.)

M & L for RCC Design mix (M-25) using 20mm graded stone aggregate for column above GL , lintel beam , chajja, roof beam and slab or similar suspended work etc. complete all as specified and as directed.(Note : Reinforcement shall be measured and paid seperately under relevant items.)

M & L for 10 mm dia and over TMT bars cut to length bent to shape as required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

All as per item No.11above but 6 to 8mm dia round bars as in stirrups and -ditto-

M&L for formwork flat, rough finished surface of concrete for side of footing columns, plinth beams or similar work including any types of supports/scafoldings etc complete all as specified and as directed.

M&L for form work Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and as directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S&F coloured pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strngth of 550 Mpa and 150 AZ as in roof covering /cladding to wall fixed with self tapping screws including necessary washers etc all as per manufactures instruction complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa 150 AZ as in roof covering/cladding to wall, eaves board fixed with self tapping screws complete all as specified and as directed.

Returning filling in, including spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed .

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and directed.

M & L for rendering 15 mm thick in CM (1 : 6) on any faces of stone masonry or concrete block surfaces,finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls of any description over 10cm girth or width not otherwise described and applying three coats of white wash complete all as specified and directed.

M & L for rendering 15 mm thick in CM (1 : 4) on any faces of stone masonry or concrete block surfaces,finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, well, cesspits, manholes, peir holes, etc. n.exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

M&L for machine pressed precast conctete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade With Grey and pigment laid over 50 mm thick sand cushion and compacted with mechanical plate vibrator complete all as specified and as directed. (Note :Sand filling shall be measured and paid separately).

M&L for Sand filling and sand cushioning under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Point wiring with PVC insulated and unsheathed FRLS multistranded copper conductor cable conforming to IS specification with 2 runs of 1.5Sqmm including one run of 1.5sqmm single core multistranded copper condutor , 1100 volts grade cable conforming to and drawn in and including 25mm steel conduit and conduit accessories on surface including modular plate , cover and metal flush box fixed with wall surface for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

M & L for sub main wiring with PVC insulated and unsheathed FRLS multistranded copper conductor cable conforming to IS specification with 2 runs of 2.5Sqmm including one run of 2.5sqmm single core multistranded copper condutor , 1100 volts grade cable conforming to and drawn in and including 25mm steel conduit and conduit accessories on surface including including 2.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

Supply and fix modular switch 1 way 6A,1 module complete all as specified and directed.

Supply and fix modular shutter socket outlet 3 pin 6Amps 230 volts 2 module complete all as specified and directed.

Supply and fix modular switch 1 way 16A,1 module complete all as specified and directed.

Supply and fix modular shutter socket outlet 3 pin 6/16 Amps 230 volts 2 module complete all as specified and directed

S&F LED tube light fitting of 20 watts 6000K , 230 volt, with basic all purpose surface and wall mounted LED batten with aluminium extruded housing & integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed .

S&F Bldg security light fittings 1x 35 Watt LED street light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories and including connection up with twin core twisted flexible copper conductor cable with 1.5 M long suitable size and 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole complete all as specified and directed.

Supply and fix of Sheet metal enclosure (ISI marked) distribution board SPN, 240 volts, 8 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified.

Supply and fix RCBO Double pole 30mA, 240 volts, 16amps 10 kA rupturing capacity complete all as specified and directed.

Supply and fix MCB single pole 6 to 32 Amps 240 volts, C series,10 kA rupturing capacity complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground (earth pit depth not less than 2.25m deep below the ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to earth using GI earth wire of 4mm dia by means of of nuts, bolts and washer and check nuts of GI or steel as shown in electrical plate No.3 of MES SSR-2009 (Part-I) and connected to earth test point all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth including PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 6mm dia MS bars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia light grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil complete all as specified and directed.

Supply and laying of XLPE Aluminium stranded cable Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded Size of 10 sqmm x 2 core complete all as specified and directed.

Supply and lay common burnt old size bricks of sub class B laid at right angle on the cable complete in trenches for cable protection complete all as specified and directed.

Supply and spreading clean dry river sand in trenches for cushioning of UG cables complete all as specified and directed.

Supply and fixing GI tubing light grade 40 mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wall complete including taking out if required complete all as specified and directed.

OM INFRA (BID ID -3495998)

bholanath bera (BID ID -3496650)

K. VENKATESH NAIDU (BID ID -3491197)

ANTTARANGNI INTERIOR (BID ID -3490140)

PATEL CONSTRUCTION (BID ID -3497254)

PRACHANIVA CONSTRUCTIONS (BID ID -3491139)

K N RAJ CONSTRUCTIONS (BID ID -3487822)

PRAGATHI BUILDERS (BID ID -3486986)