REPAIR AND PAINTING/POLISHING TO MISC FURNITURE AT SCHOOL OF ARTY UNDER THE AOR OF GE DEOLALI

Amount

Chair Varndah - FD-256, 219

Removing of old cane from chair varandah steel (bottam and back) and applying two coat of synthetic enamel white on all over surface after sanding/scrubbing with sutaible sand paper.their after re-canning with new best quality plastic cane 4mm wide, white colour complete all as specified and directed. Make : Maharastra plastic industries / Indian plastic / National Cane (Kachigm – Daman)

Removing old / unserviceable cane from wooden Chairs (other than chair verandah) and re-caning with new plastic cane, white, 2mm wide weaving in holes of the frame and alongwith periphery of weaving work with 4mm wide white plastic cane in Godrej pattern & as specified, shown on drawing and as directed by Engineer-in-Charge. Make : Maharastra plastic industries / Indian plastic / National Cane (Kachigm – Daman)

Chair Dining - FD-279

Removing of the following unserviceable/broken wooden Parts from chair dining and Supply & Fixing of New Parts made out of Ist class hard Wood (Teak) duly polished, made to shape and size as per existing drgs, including max no of six brackets (06) used in tightening of entire chair, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and polishing of complete chaire after sanding by suitable sand paper. all as specified and shown on drgs and as directed by Engineer-in-Charge.(Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish,pvc shoes , screws, nails bamboo pins,brackets etc required as directed including labour for fixing new parts

Supply Front/ Rear legs of chair dining first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply new front rail/side rail/ back rail of chair dining first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply new bottam stiffener of chair diningfirst class hard teak wood,made to shape complete all as specified and shown in drg.

Chair Writing - FD-202/250/280

Removing of the following unserviceable/broken wooden Parts from Chair Writing and Supply & Fixing of New Parts made out of Ist class hard Wood (Teak) duly polished, made to shape and size as per existing drgs, including max no of (06) brackets used in tightening of entire chair, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and polishing of complete chaire after sanding by suitable sand paper.all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish , screws, nails bamboo pins etc required as directed including labour for fixing new parts)

Supply Rear legs of chair writing first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply arm rest of chair writing first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply front legs of chair writing first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply new side/front/back rail of chair wrirring first class hard teak teak wood,made to shape complete all as specified and shown in drg.

Supply with new bottam stiffener of chair writing first class hard teak wood,made to shape complete all as specified and shown in drg.

Chair Easy - FD-201 & 229

Removing of the following unserviceable/broken wooden Parts from chair easy and Supply & Fixing of New Parts made out of Ist class hard Wood (Teak) duly polished, made to shape and size as per existing Drgs, including max no of brackets (06) used in tightening of entire chair, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and polishing of complete chaire after sanding by suitable sand paper. all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish , screws, nails bamboo pins etc required as directed including labour for fixing new parts)

Supply of Front/Rear legs of chair easy first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply new back batten of chair easy first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply new arm rest of chair easy first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply new front & back/Side rail of seat/back of chair easy first class hard teak wood,made to shape complete all as specified and shown in drg.

Bed Ply top - FD 246

Removing of the following unserviceable/broken wooden Parts from Bed Ply Top and Supply & Fixing of New Parts (new wooden parts duly polished), made to shape and size as per dgs, including tightening of Bed by wooden brackets, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish ,brackets, screws, nails bamboo pins etc required as directed including labour for fixing new parts

Supply of duly polished Teak veener on both side to both head rest & Foot Rest

Supply only Batten of size 50 mm X40mmX900mmL made out of 2nd class hard wood

Supply only plywood top of hard bed 12mm thick commercial BWR grade 7 ply,(Make Hindo Ply/Neuro Tuff Ply /Kit Ply ) and 4 nos of TeakWood Corner 100x100mm between the legs and long rails.as per specified & shown on drwg

Table Writing - FD 275/249

Removing of the following unserviceable/broken Parts from Table Writing and Supply & Fixing of New Parts (new wooden parts duly polished), made to shape and size as per drgs, including tightening of completeTable by brackets, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as brackets, polish , screws, nails bamboo pins etc required as directed including labour for fixing new parts)

Supply new legs of table writing of first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply new bottam stiffner of table writing of first class hard teak wood,made to shape complete all as specified and shown in drg.

supply new drawers/shutters, drawers to be run on telescopic channels and bottom cupboard fixed with magnetic catcher and piano type hinges.( Box shall be made of 18 mm thick prelaminated particle board except back side and back shall be made of 6mm thick commercial plywood complete all as specified and shown in drg.

Supply & fixing in replacement of handle as per sample approved by GE/Engr-in-Charge

supply new Pre-laminated particle board 19mm thick light shade as approved by GE with 6mm thick teak wood beading alround the edges of partical board complete all as specified and shown in drg.

Table Centre - FD 274

Removing of old unserviceable top of table centre & Tightning the centre table and supply & fixing new Pre-laminated particle board 19mm thick light shade as approved by GE with 6mm thick teak wood beading around the edges of partical board complete all as specified and shown in drg.

Sofa Set - FD -258/373

Removing of Old/Unsv foam cushion with tapestry cloth from Sofa Set 5 Seater (3 Pieces)and Supply & Fixing of New Foam Cushion of size 21"X22"X100mm Thick of 40 density covered with new malmal and tapestry cloth of best quality as approvd by GE/Engineer-in-Charge (10 Nos in Each Set, Five from seat & five from back) Make - Sleepwell/Kurlone . Note- Tapestry cloth not less then Rs 200/- per mtr.

Removing of old unserviceable cushion cover and supply and fixing with new cord type covered with malmal (cloth lining) and there after top cover with closely woven fabric as approved by Engr - in - charge and cost of tapestry cloth shall not be less than Rs 200/- Per mtr. (10 Nos of Each Set, Five from seat & five from back)

Sofa set 5 seater - FD 373

Removing of old unserviceable cushion cover and supply and fixing with new cord type covered with malmal (cloth lining) and there after top cover with closely woven fabric as approved by Engr - in - charge and cost of tapestry cloth shall not be less than Rs 200/- Per mtr. (10 Nos of Each Set, Five from seat & five from back)

Removing of Old/Unsv foam cushion with tapestry cloth from Sofa Set 5 Seater (3 Pieces)and Supply & Fixing of New Foam Cushion of size 21"X22"X100mm Thick of 40 density covered with new tapestry cloth of best quality as approvd by GE/Engineer-in-Charge (10 Nos of Each Set, Five from seat & five from back) Make - Sleepwell/Kurlone . Note- Tapestry cloth not less then Rs 200/- per mtr.

Chair Dining Cushioned (MAP) - FD/E6/MAP/06, FD/E6/MAP/04,FD/E6/MAP/10R

Removing of the following unserviceable/broken wooden Parts from chair dining and Supply & Fixing of New Parts (new wooden parts duly polished), made to shape and size as per drgs, including tightening of chair by wooden brackets, fixing of joints with glue and bamboo pins and all as specified and shown on drgs and as directed by Engineer-in-Charge.(Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish ,brackets, screws, nails bamboo pins etc required as directed including labour for fixing new parts)

Removing of old unserviceable cushioned seat of chair dining (MAP)and supply & fixing new cushioned seat with aproved tapestry for chair dining (MAP) cushioned Seat shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75x75x25mm Teak Wood stoppers, ftoppers to be fixed at four corners of main frame of chair complete all as specified and shown on drawing as approvd by Engineer-in-Charge. Make of foam :- Fetherfoam/ sleepwell/ kurlon.(Note- Tapestry cloth not less then Rs 200/- per mtr).

Chair Dining Long back Cushioned

Removing of old unserviceable cushioned seat of chair dining long back cushioned and supply & fixing new cushioned with approved rexin for seat of chair dining long back cushioned Seat shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75x75x25mm Teak Wood stoppers, ftoppers to be fixed at four corners of main frame of chair complete all as specified and shown on drawing Make of foam :- Fetherfoam/ sleepwell/ kurlon.

Ditto all as per item ser No 13 (a) above but back

Peg Table - FD 277

Removing of old unserviceable top of table peg and tightining the frame by means of screw/brackets and supply & fixing new Pre-laminated particle board 19mm thick light shade as approved by GE with 4 mm thick teak wood beading alround the edges of partical board complete all as specified and shown in drg.

Chair Dining MAP JCO/Ors

Removing of the fllowing unserviceable / broken PVC seat of chair dining MAP and supply & fixing PVC seat 4 mm thick with holes screwd with rails and supporting 25x25 mm wooden stiffner provided for support to centere of the pvc seat

Table Dining 4'x3' / 4 persons - FD 273

Removing of the following unserviceable/broken wooden Parts from Table Dining4'X3' and Supply & Fixing New Parts (new wooden parts duly polished), made to shape and size as per Drgs, including tightening of complete Table with Wooden Brackets, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish , screws,brackets, nails bamboo pins etc required as directed including labour for fixing new parts)

Supply new legs of table dining 4'x3'of first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply new long rails of table dining 4' x3'of first class hard teak wood,made to shape complete all as specified and shown in drg.

Supply new short rails of table dining 4'x3' of first class hard teak wood,made to shape complete all as specified and shown in drg.

supply new Pre-laminated particle board 19mm thick light shade as approved by GE with 6mm thick teak wood beading alround the edges of partical board complete all as specified and shown in drg.

Removing unserviceable / broken top Knob and S & F new Decorative Knob of approved quality by means of req screw to various Fur Items like Side Board/Book case/ various Tables other Items

Removing unserviceable / broken top Handle and S & F new Decorative Handle of approved quality to various Fur Items like Side Board/Book case/ various Tables other Items

Teapoy - FD 382

Removing of old unserviceable top of teapoy and supply and tightining the frame by means of screw/brackets & fixing new Pre-laminated particle board 19mm thick light shade as approved by GE with 4mm thick teak wood beading alround the edges of partical board complete all as specified and shown in drg.

Chair Easy cushions

Removing of old unserviceable cushioned seat & back of chair easy cushions and supply & fixing new cushioned seat and back of approved rexin for chair easy cushioned Seat & back shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75x75x25mm Teak Wood stoppers, floppers to be fixed at four corners of main frame of chair complete all as specified and shown on drawing Make of foam :- Fetherfoam/ sleepwell/ kurlon.

Removing of old unserviceable cushioned from chaire arm of chair easy cushions and supply & fixing new cushioned to arm with approved rexin for chair easy cushioned all as specified and shown on drawing Make of foam :- Fetherfoam/ sleepwell/ kurlon.

Hat stand W/M - FD 233

Removing old / unserviceable plywood / teak veneered and provide new 6 mm thick with teak veneered one side and commercial face veneers duly polished on other side shown on as per drg.

Removing old / unserviceable Pegs and provide new pegs shall be of mild steel copper oxidized shown on as per drg.

Table Bed Side - FD 276

Removing old / unserviceable Supply only plywood of back side 6 mm thick commercial plywood BWR grade (Make ,Kit Ply/Green Ply)

Removing of old & Supply and fixing of new particle board of 12mm to top of Table bed side, 4 mm teak around edging around all as specified and shown on drwg

Removing of old & Supply and fixing of new particle board of 12mm to side of Table bed side, 4 mm teak around edging around all as specified and shown on drwg

Removing of unserviceable /broken shelves and providing new shelves made out of 6 mm thick BWR grade playwood all as shown on drgs. (Make ,Kit Ply/Green Ply)

The wood components shall be rubbed with apropriate size sand paper along the grains to remove any dust/ wax/unwanted stains from the surface. Any cracks or holes shall be filled with suitable wood filler of good quality approved by Engr -In - Charge. Two to three coats of French Polish shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required as directed by Engg-In-Charge. Polishing to the following wooden furniture items will be also carried out in Officer /Jco/Ors Qtrs and unit lines location :-

Book Case - FD 45, FD 237

Bed W/Ply top w/o FMN FD - FD 246/247

Chair Dining - FD-279

Chair Easy - FD-201 & 229

Chair Writing - FD-202/250/280

Chair Easy Cushioned - FD 358

Display Board 1220x 1220mm - TP

Hat stand W/M - FD 233

Locker Bed side P - DB 4074

Peg Table - FD 384/277

Sofa Set 5 Seater - FD-373/281 , 258

Sofa Set 4 Seater - FD-373/281 , 258

Sofa single Chair - FD 373

Side Board - FD 1112, FD 241, FD 371

Table Writing - FD-249/275

Table Writing Medium - DB 3987, 3955

Table Dressing Gents W/M - FD-23, 31, 230/379

Table Dressing Ladies W/M - DB 3980, FD- 45 (M), FD 378

Table Bed Side - FD 248 / 276

Table dining 4 persons, 1200 mm X 900 mm X 760 mm: DrgNo FD -273

Table office clerk - DB-4120

Table office officer steel - DB 4119

Teapoy - FD 382, DB 3675

Table Dining 6 pers - DB 10081 / FD -273

Table Dining 8 pers - FD-273

Table 900x 900 x 760 mm w/Dvr - FD 291, FD 283

Table Centre - FD 29 /274

Table 3x2 with drawer - FD 41/224FD 1008

Table 3x2 with out drawer - FD 284/231, FD 1007

Sofa Set 5 Seater set of (3+1+1) w/cushion - FD/MAP-II/02

Bin solid Linen Multipurpose - FD/MAP/06

Chair dining Map JCO/Ors - FD/MAP-II/05

Chair Dining Map - FD/MAP - II/04

Table Dressing Ladies Including Stool - FD/E6/MAP-II/07

Table Dressing Gents w/m - FD/E6/MAP-II/18

Table dining 4 persons, 1200 mm X 900 mm X 760 mm: - FD/MAP-II/03,

Table dining 6 persons, - 1500 mm X 900 mm FD/MAP-II/03

Teopoy P - DB 3975

Almirah Med 1/2S x 1/2 H - DB 4232

Almirah Med w/s - DB 3954

Almirah Large W/S - DB 4232, DB 4116

Rifle Rack - TD/2K/CWE/15

M & L for preparing of furniture items as per following steps : (i) Denting of bent surface wih the help of hammer in best workmanship manner. (Ii) Removing old paint by scubbing with sand paper 150 no throughly (ii) Applying one coat of metal primer make: asian / dulux/ nerolac. (iv) Applying metal putty to even the surface and wait period of 2-3 hours to be given for putty to set and dry completely, Scrub off the excess putty with 150 No sand paper and spraying little amount of water simultaneously. (v) Wipe the surfface with soft dry cloth and apply two coat of enamel paint by means spray painting shade as approved by GE DVL / Engr - In -Charge. Make Asian (Apcolite), Berger (Luxol), Shalimar (Superlac) Note- All fur itms parts are to be completed painted and Polished (if any wooden part), dissembling/assembling of fur item to be done as per requirment.Painting to the following furniture items will be also carried out in Officer /Jco/Ors Qtrs and unit lines locations

Almirah Large Steel w/s & w/k - FD 67, FD 1031, FD/E6/MAP/18

Almirah Med Steel w/s & w/k - D 67/ FD 1031, FD 243, FD 1032, FD/E6/MAP/18

Almirah Large steel 1/2 s x1/2 H - FD 1033

Chair CB steel with arms - FD-75(M)

Chair CB Steel without arms - FD-75(M)

Chair CBA spl Hand Rest - FD 120

Chair Varandah - FD No-219, FD 256, FD/MAP-II/06,

Locker Bed side steel - FD-1029

Table 3’x2’ with drawer (steel frame) - FD 1007

Table 3' x 2' without drawer (steel frame) - FD 1008

Teapoy Varandah - FD 255, 383, FD/E6/MAP/17

Table Office Clerk Steel - FD 84(M) & 1004

Table Class room steel - FD 45, 75

Table Dining Ors w/zink - top FD 165 (M)

Table office officer steel - FD 84 (M), FD 1003

Chair School W/Hand Board - FD/E6/MAP/05

Table Bed Side steel MAP - FDE6/MAP/15 R

Bed Hard W/Ply top MAP - FD/E6/MAP/08R

Chair Writing Steel Map - FD/E6/MAP/12

Shoe Rack Steel - FD/E6/MAP/02R

stool steel - FD 81/119

side rack with tray steel - FD 1023

Trestle store room - FD 43/1043

Rack 6 tier steel - FD 1038/1039

Charpoy W/Hard top - FD/E6/MAP/II/01

Fmn set Iron for Charpay GI Pipe - FD 21/53

ALMIRAH LARGE STEEL WITH SHELVES OR 1/2 S x 1/2 H:- - FD-67/1031/Map

Removing of old unserviceable MS clamps/ Bracket and supply & fixing of new MS clamps/ Bracket with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge.

Removing of old unserviceable lock and supply & fixing of new 6 lever lock with duplicate keys, by nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. Make:link /Godrej/Standard/Aligarh or Equvalent approved by GE

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge.

Removing of old unserviceable MS shelve, supply & fixing of new MS shelve made to shape out of 1mm thick MS sheet fixing by bolts or welding, MS black sheet duly painted with two coats of synthetic enamel paint per given in drawing and site requirement complete all as specified and directed by Engr -In - Charge. Paint Make-Asian/Delux/Nerolac

Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge.

Removing unserviceable leg and providing new leg made out of 1 mm thick MS black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting and welding to almirah large steel with shelves

ALMIRAH MEDIUM STEEL WITH SHELVES:- - FD-1032

Removing of old unserviceable MS clamps/bracket and supply & fixing of new MS clamps/bracket with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge.

Removing of old unserviceable lock and supply & fixing of new 6 lever lock with duplicate keys, by nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. Make:link /Godrej/Standard/Aligarh or Equvalent approved by GE

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge.

Removing of old unserviceable MS shelve, supply & fixing of new MS shelve made to shape out of 1mm thick MS sheet fixing by bolts or welding, MS black sheet duly painted with two coats of synthetic enamel paint per given in drawing and site requirement complete all as specified and directed by Engr -In - Charge. Paint Make-Asian/Delux/Nerolac

Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge.

Removing unserviceable leg and providing new leg made out of 1 mm thick MS black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting and welding to almirah Med steel with shelves .

LOCKER BEDSIDE STEEL:- - FD-1029

Removing of old unserviceable lock and supply & fixing of new 6 lever lock with duplicate keys, by nut bolts or welding as per given in drawing and site requirement complete all as specified and directed by Engr -In -Charge. Make:link /Godrej/Standard/Aligarh or Equvalent approved by GE

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long/Door Handle with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge.

Removing of old unserviceable leg and supply & fixing of new leg made out of 1mm thick MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting, fixing by nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge.

Charpoy GI Pipe W/Ply top

Removing of unserviceable nylon tape newar from charpoy GI Pipe, Tightining of entire the loose frame and converting into hard top charpoy by providing 12 mm thick plywood BWR grade including 3 Nos MS Square tube of size 25 mm x 25 mm , 16 Gauge along width of charpoy, fixed duly welded with frame as support to plywood with hole and fixed with required size nuts & bolts all as specified and directed by Engr - In - Charge. Make : Kitply / century/Anchor/Hindo

Chair CB Tubler Steel with arm Drg o FD 75 (M)

Removing of unserviceable/ broken back frame and S & F new back frame made out of 1st class hardwood (Teak ) duly black French polished for Chair CB steel with arms with suitable screws including Godrej pattern canning, . Complete all as specified & shown on drgs.

Ditto all as per item No. above but for seat frame.

Removing of unserviceable/broken arm and S & F new arm made out of first class hard wood ( teak) duly black French polished with necessary screws, complete all as specified & shown on drgs.

Removing of unserviceable / broken MS cleats and S & F of new MS cleats of size 25 x 3mm,50mm long fixed by arc welding to chairs tubular frame for fixing the seat.

Chair CB tubler Steel w/o Arms - FD 75 (M)

Removing of unserviceable/ broken back frame and S & F new back frame made out of 1st class hardwood ( Teak ) duly black French polished for Chair CB steel without arms with suitable screws including Godrej pattern canning, . Complete all as specified & shown on drgs.

Ditto all as per item No. above, but for seat frame.

Removing of unserviceable / broken MS cleats and S & F new MS cleats of size 25 x 3mm, 50mm long fixed by arc welding to chairs tubular frame for fixing the seat, back and applying two coats of synthetic enamel paint (olive green) to the steel frame (all as directed.)

Chair Varandah - FD 256, FD/E6/MAP/06

Material and labour for welding to broken joints of frame of chair varandah complete all as specified and directed by Engr -In -Charge.

Removing the old unsv PVC seat & back,Supply & fixing new Seat & Back 4 mm th with wt not less than 1.85 Kg Make : PVC VIRGO/ AMCO

Bed Hard Map - FD/E6/MAP/08R

Removing of unserviceable plywood and Supply and fixing new 12 mm ply BWR Grade 1 commercial tp Bed Hard Map of size all as shown on drg. Make- Kitply / century/Sainik/anchor

Removing of unserviceable Particle Board of Head rest and Foot rest and Supply and fixing new one of exterior Grade with PVC Beading around to Bed Hard Map of size all as shown on drg. Make- Kitply / century/Sainik

Material and labour for welding to broken joints or Tighting of entire frame by means of nuts bolts of Bed Hard Map complete all as specified and directed by Engr -In -Charge.

REPAIR TO TABLE DINING STEEL 900 X 900 X760 - MM FD-1009

Removing worn out top of table and Supply and Fixing new top of size 900 x 900mm , made out with 18/19 mm thick prelaminated particle board exterior grade (Make -Novapan) with natural teak finish, one side fixed with PVC beading all round the top ( complete all as directed.)

Taking out existing unserviceable MS Square tube of table dining steel 900x900x760 FD/Table steel 900x600x760mm and welding the frame by providing new MS Square tube of size 25 mm x 25 mm 16 gauge (Complete all as directed by Engr-in - charge)

Repairs to Table steel 900X600x760mm. - FD-1007/1008

Removing the worn out table top and Supply and Fixing new table top of size 900mmx 600mm made out of 18 /19 mm thick pre-laminated particle board exterior grade (Make -Novapan) natural teak finish, one side fixed with PVC beading all round the table top ( All as shown in drawing.)

Removing unserviceable lock ,supply & fixing new drawer brass lock with stainless steel duplicate keys for table steel 900x600x760mm. Make :- Godrej/Aligarh or equivalent approved by GE

Chair Writing Steel Map - FD/E6/MAP/12

Replacement of old unserviceable arms with new black integral skin polyuretheane with 75-85 shore 'A' hardness and reinforced with MS Insert both hand rest sections to have slope towards front as per trades patttern.

Removing the old unserviceable MS Pata Frame fitted between seat & back and Supply and Fixing the new one all as per exsting pattern or directed by engr-in charge.

Removing the old unserviceable seat n back cover and Supply and Fixing the new seat and back cover , polyurethane foam shall be moduled with density 50 -55 kg per cubic meter thick and hardness 20 +/-2 kg on hampden machine and moduled polyrethane foam with PVC lipping all around as per drawing.

Chair School with hand board - FD/E6/MAP/05

Removing of old unserviceable and supply & fixing of new 18 mm thick one side prelaminated particle board top openable with PVC edging (hinged on right hand side) screwed to 25 mm mild steel pipe inserted in 20 mm dia rod welded to with new frame as per drawing.

Removing old unserviceable seat and back, Supply & Fixing New Seat & Back with suitable screw/clits welded to frame, New one shall be in one piece made out of PVC (Make Blowplast/ Supreme /Cello / National

REPAIR TO TABLE DINNING ORS - FD-165/165(M)

Taking down existing unserviceable MS square tube and welding the frame by providing new MS square tube size 25mm x 25mm, 16 Gauge complete all as directed.

Removing worm out wooden top of table and Supply and Fixing new 18/19 mm thick paricle board exterior grade top of size 190 x 635 mm covered with 22 gauge superior quality aluminium sheet (All as shown on drawing and directed)

Charpoy W/Hardtop - FD/E6/MAP/II/01

Removing of unserviceable plywood and Supply and fixing new 12 mm ply BWR Grade 1 commercial to exsting charpoy w/ Hard top Map of size all as shown on drg. Make- Kitply / century/Sainik/anchor

Material and labour for welding/tightning to broken joints of frame of Bed Hard Map complete all as specified and directed by Engr -In -Charge.

Table class room steel

Taking down existing unserviceable MS square tube and welding the frame by providing new MS square tube of size 25mm x 25mm, 16 Gauge complete all as directed by Engr - In - Charge.

Removing the worn out table top and Supply and Fixing new table top of size 1200mmx 900mm made out of 18 /19 mm thick pre-laminated particle board exterior grade (Make -Novapan) natural teak finish, one side fixed with PVC beading all round the table top all as per existing pattern ( All as specified and directed by Engr - in - Charge.)

Note: Amount of sch of credit of Rs.20610/-will be deducted from total amount of BOQ.

M/s Rajesh G Ramsinghani (BID ID -3206903)

GAJANAN SALES CORPORATION (BID ID -3202030)

SARGAM ENTERPRISES (BID ID -3202258)