Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.9 LAccepted-AOC BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | ₹46.9 L | L1 | Accepted-AOC BEING LOWEST BIDDER |
| 2 | L2₹49.1 L+₹2.3 L (4.81%)Rejected-AOC C O SHRI AMRENDER KUMAR YADAV IACHHIPUR SANTOSH NAGAR GORAKHNATH GORAKHPUR UTTAR PRADESH PIN 273015 | GORAKHPUR | UTTAR PRADESH | 273015 | ₹49.1 L+₹2.3 L (4.81%) | L2 | Rejected-AOC NOT LOWEST BIDDER |
| 3 | L3₹49.6 L+₹2.8 L (5.88%)Rejected-AOC | ₹49.6 L+₹2.8 L (5.88%) | L3 | Rejected-AOC NOT LOWEST BIDDER |
| Sl No | Description | Qty | Unit | PACHAR BROTHERS L3 | M/S Shree Ram Enterprises L1 | SHIVA BUILDERS L2 |
|---|---|---|---|---|---|---|
| .10Notes:- (i) 100 percent of nonperishable items under the subject work as per the site requirement of Engineer-in-charge shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) The unserviceable material obtained under the schedule of credit shall be handed over to the contractor by the Engineer-in-Charge on a proper gate pass. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated makes as approved by HQ CE SWC Jaipur / HQ CE BTZ in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. | ||||||
| 1.00 | M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and other similar works incl necessary form work incl demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed and directed by Engineer-in-Charge. | 1.5 | Cum | 5,000 ₹7,500 Lowest | 7,000 ₹10,500 | 6,500 ₹9,750 |
| 2.00 | M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) including demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and directed by Engineer-in-charge. | 4 | Cum | 6,000 ₹24,000 | 5,200 ₹20,800 | 4,100 ₹16,400 Lowest |
| 3.00 | S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-charge. | 80 | Kg | 100 ₹8,000 | 86 ₹6,880 Lowest | 95 ₹7,600 |
| 4.00 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, cooler stand 12mm sq guard bar, framework of water tanks and similar works of quality Fe 290 (Gde E-165) etc incl preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. | 80 | Kg | 100 ₹8,000 | 99 ₹7,920 Lowest | 125 ₹10,000 |
| 5.00 | Taking down old unserviceable window/ ventilator of any description and S&F Anodised aluminium frame with power coating of any colour (minimum thickness of power coating 50 micron).for doors, windows , ventilator ,partition with one or more rebates incl necessary joining cleats for fixing etc complete all as specified. | 110 | Kg | 700 ₹77,000 | 786 ₹86,460 | 650 ₹71,500 Lowest |
| 6.00 | S&F Anodised aluminium with power coating of any colour (minimum thickness of power coating 50 micron) for side hung type without sash bars door,window,ventilation shutters, aluminium section weighing 0.55 kg/m incl necessary joining cleats,glazing clips, ruber neoprene packing,handles Nos in each door , hinges,anodised aluminium snap beading screws etc complete all as sepcified. | 23 | Sqm | 7,000 ₹1,61,000 | 6,600 ₹1,51,800 Lowest | 7,000 ₹1,61,000 |
| 7.00 | S&F new 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side incl both side 1.00 mm thick one side Decorative laminate and other side plain laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions® complete complete all as specified and directed by Engineer-in-charge including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bolt 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bolt 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 86 | Sqm | 3,000 ₹2,58,000 | 2,786 ₹2,39,596 Lowest | 3,000 ₹2,58,000 |
| 8.00 | S&F new 35mm thick factory made glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (a) kiln seasoned and chemically pressure treated fixed to chowkat incl Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate fixed to wooden frame or welded to steel frame making suitable cut out in wall and making good in CM 1:4 (01 No in each shutter), strainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple ( for 01 Nos shutter), applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bolt 200 mm long-2 Nos per leaf as per table 01 No. dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bolt 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 50 | Sqm | 3,000 ₹1,50,000 | 2,300 ₹1,15,000 Lowest | 2,500 ₹1,25,000 |
| 9.00 | Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 sqm but n.exc 4 sqm (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats including M&L for Factory made Single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). including dismantling existing wooden/iron/stone chowkhats complete and making good existing disturbed surface with cement and sand mortar 1:3 complete all as specified and directed by Engineer-in-charge. | 220 | RM | 800 ₹1,76,000 | 650 ₹1,43,000 Lowest | 825 ₹1,81,500 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
10 Aug 2026, 6:00 pmClosed
GE (A) SURATGARH
GE (A) SURATGARH MIL STATION
COMPREHENSIVE MAINTENANCE OF CERTAIN JCO/OR MD ACCN BLDG NO OR-48 (06 X QTRS), OR-135 (06 QTRS) AND OTHER BLDG OF AREA OF AGE B/R-II AND OTHER BUILDINGS UNDER GE (A) SURATGARH AT SURATGARH MIL STN
2026_MES_778339_1
GE(A)/SOG-TOKEN-35/2026-27
Open Tender
Civil Works
Item Rate
120 days
IN THE AOR OF GE (A) SURATGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(A) SURATGARH
₹90,000
Yes
19 Sept 2026
14 Jul 2026
12 Aug 2026
14 Jul 2026
10 Aug 2026
27 Jul 2026
14 Jul 2026 - 27 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and other similar works incl necessary form work incl demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed and directed by Engineer-in-Charge. | 1.5 | Cum | - | - |
| 2 | M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) including demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and directed by Engineer-in-charge. | 4 | Cum | - | - |
| 3 | S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-charge. | 80 | Kg | - | - |
| 4 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, cooler stand 12mm sq guard bar, framework of water tanks and similar works of quality Fe 290 (Gde E-165) etc incl preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. | 80 | Kg | - | - |
| 5 | Taking down old unserviceable window/ ventilator of any description and S&F Anodised aluminium frame with power coating of any colour (minimum thickness of power coating 50 micron).for doors, windows , ventilator ,partition with one or more rebates incl necessary joining cleats for fixing etc complete all as specified. | 110 | Kg | - | - |
| 6 | S&F Anodised aluminium with power coating of any colour (minimum thickness of power coating 50 micron) for side hung type without sash bars door,window,ventilation shutters, aluminium section weighing 0.55 kg/m incl necessary joining cleats,glazing clips, ruber neoprene packing,handles Nos in each door , hinges,anodised aluminium snap beading screws etc complete all as sepcified. | 23 | Sqm | - | - |
| 7 | S&F new 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side incl both side 1.00 mm thick one side Decorative laminate and other side plain laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions® complete complete all as specified and directed by Engineer-in-charge including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bolt 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bolt 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 86 | Sqm | - | - |
| 8 | S&F new 35mm thick factory made glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (a) kiln seasoned and chemically pressure treated fixed to chowkat incl Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate fixed to wooden frame or welded to steel frame making suitable cut out in wall and making good in CM 1:4 (01 No in each shutter), strainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple ( for 01 Nos shutter), applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bolt 200 mm long-2 Nos per leaf as per table 01 No. dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bolt 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 50 | Sqm | - | - |
| 9 | Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 sqm but n.exc 4 sqm (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats including M&L for Factory made Single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). including dismantling existing wooden/iron/stone chowkhats complete and making good existing disturbed surface with cement and sand mortar 1:3 complete all as specified and directed by Engineer-in-charge. | 220 | RM | - | - |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw with drawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including 150mm SS grade 304 tower bolt ( 2 for each door) & 125mm SS grade 304 handle ( 2 No each door) all as per direction of Engineer-In-Charge. | 68 | Sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.57 MB
T35.pdf
Tender Documents • 1.49 MB
BOQ_871764.xls
BOQ • 0.34 MB
Corri01.pdf
PDF • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .