Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹18.6 L+₹2.2 L (13.5%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹20.3 L+₹3.9 L (23.7%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹20.7 L+₹4.4 L (26.6%)Rejected-Finance | L4 | Rejected-Finance Other than the lowest bid | |
| 5 | L5₹21.6 L+₹5.2 L (31.8%)Rejected-Finance 15 GURU RAM DASS COLONY MITHAPUR JALANDHAR | L5 | Rejected-Finance Other than the lowest bid |
Tender Value
₹22.0 L
EMD Value
₹43,920
Closing Date
2 Aug 2023, 6:00 pmClosed
Garrison Engineer (West)
Kabir Road Jalandhar Cantt
Certain repair to sunken floor, chajja, wall seepage etc and roof treatment to bldg pertain to area of AGE B/R-I under GE (West) JRC
2023_MES_606428_1
GE/JAL(W)-39/2023-24
Open Tender
Civil Works
Item Rate
270 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (West)
₹43,920
Yes
26 Aug 2023
28 Jun 2023
9 Aug 2023
28 Jun 2023
2 Aug 2023
21 Jul 2023
Amount
Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level complete .
Demolition of brick work built in cement mortar including all quoins, arches ,pillars etc complete all as specified and directed by Engr-in-Charge.
Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc
M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6.
M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as spd and directed
M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in kerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work complete all as specified and directed.
M&L 10mm thick rendering in CM 1:3 on brick/concrete surface as in ceiling and finishing the surface even and smooth with out using extra cement.
M&L 15mm thick rendering on wall in CM 1:4 with appropriate WPC as per manufacturer's information from SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO with confirming to IS 2645 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.
M&L 15mm thick rendering on wall in CM 1:6 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.
Demolition of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish of the premises
M&L coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick cement plaster in CM 1:4.
M&L Non skid Coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exce 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pinted in white or coloured cement to match with including 15mm thick screed bed in CM 1:6.
M&L for 15mm thick rendering in 1:3 CM with using @ 3% WPC as in sunken portion complete all as directed.
Supply only integral water proofing compound.
M&L Plain Cement Concrete Type A0 1:1.5:3 (using 12.5 mm graded stone aggregate) fillet at corners as directed by Engr in Charge complete.
M&L for priming surfaces with bituminous primer polymerised primer oil based @ 0.30kg per Sqm.
M&L for applying a coat of industrial bituminous 85/25 @ 1.20 Kg per sqm including cleaning surfaces.
M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application( sealed by flame) with over lap of 15 cm complete all as specified and directed complete all as spd and directed.
M&L 25mm thick cement concrete flooring type B-1, 1 :2 : 4, using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement.
M&L Cement concrete type E-2, 1:5:10 using 40mm graded aggregate in foundations filling and mass concrete as in sunken floor.
Cutting holes into or through brick walls built, in cement mortar Superficial area n.exc 150 sq. cm upto 23 cm of depth of wall for repairing of existing spout pipe,
M&L for 40mm dia GI pipe,med grade beveled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface complete etc.(Measured for cutting holes shall be paid in concerned item)
Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.
Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.
S&F 15mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed.
Refixing 15mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)
S&F 20 mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed.
Refixing 20 mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)
Cutting chases, pinning in making good to facings where reqd and pointing in cement mortar 1:3 to ends or edges of shelves , for water tubing etc and making good, cutting exc 10cm girth but not exc 20cm girth in stone walls
Disconnecting existing tanks exc 250 ltr but n. exc. 500ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.
Dismantiling of water tanks of capacity exc 250 & n exc 500 ltrs incl all necessary fittings complete.
S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top ) hoisted and fixed in position all as spd in SSR part-I
S&F 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair
S&F ball float valve PTMT with epoxy coated aluminimum rod for 20 mm bore pipe high pressure with polythelene high density float and complete screwed for iron pipe.
S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs.
S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs.
S&F Vitreous China wash down Water closet pan (pedestal pattern) "with plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) in repairs completee
S&F in repair Vitreous China Water closet (Squatting pattern) "Orissa Pattern" size 580x 440 mm white with 'P' or 'S' trap, front or back inlet and foots rests any pattern (excluding flusing cistern and flush pipe) complete.
S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm for low level cistern in repairs complete all as specified and directed
M&L 75mm PVC (SWR) floor trap , plain with CP grating including jointing with solvent cement complete all as spd and directed
S&F in replacement CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified.
S&F in replacement CP Jet for EWC including flexible pipe complete all as specified.
S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified
Taking down existing water proofing from roof slab and cleaning the roof slab incl scrapping of existing loose concrete from roof top and washing with water complete all as specified and directed.
M&L PCC 1:2:4 type B0 using 12.5mm graded stone agg in padding Complete all as specified and directed.
M&L 10mm thick rendering on top of roof slab in cement mortar 1:4 by using water proofing compound @3% by the weight of cement, finishing the surface even and fair without using extra cement.
Supply only integral water proofing compound.
Providing and applying liquid Polyurea-PU based hybrid elastomeric water proofing membrane at existing/newly constructed roofs, RCC structure like basement raft, retaining wall, water retaining structure, tunnels/subways and bridge deck etc. in two or more coats. The product must have pot life of >90 mins., tensile strength > 12.6 Mpa, elongation of > 500% conforming to ASTM D 2370 & puncture resistance of >200 N as per ASTM E 154 with min. consumption of 1.5 Kg per sqm for 1.2mm DFT in two- three coats. The surface needs to be primed with water soluble self impregnated epoxy primer in two coats to be applied @ 200-250 gms/sqm/coat prior to Polyurea -PU application. Furthermor, (in case the substrate is not suitable) 15mm plaster is advisable for surface prepration before application of the water proofing membrane to avoid pinholes or functional difficulties of the system (Make - Asian Paints, BASF & SIKA) Note:- The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm.
Dismantling of brick tiles single layer as in roof covering complete all as specified
Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) all as specified.
Cleaning/Roughening surfaces of old concerete floor/roof by picking , sweeping clean and washing down with water to romove the dust etc complete all as spd.
M&L APP based polymeric membrane minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application( sealed by flame) with over lap of 10 cm complete all as specified and directed.
M & L 40mm th. Brick tiles laid on 15mm thick bedding layer of CM 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane complete all as spd and directed.
Fixing only 40mm th. Brick tiles laid on 15mm thick bedding layer of CM 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane complete all as spd and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
Dismantling of cast iron or reinforced concrete drain pipes of size 100mm dia, jointed in cement mortar and taking out of trenches, if required.
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls
S&F110mm PVC (SWR) bends
S&F75 mm PVC (SWR) bends
S&F110mm PVC (SWR) junction single, (Single T) equal or unequal
M&L for repairing of R.C.C projections, chajjias, roofs, facia etc in patches not exceeding 3 Sqm in each patch by necessary preparation. Scarpping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces and applying one coat of cement slurry and filling the surfaces with cement concreat (1:1.5:3) using 12.5mm graded crushed stone aggrigates and reinforced with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 75mm including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge. (Note : Cost of form work and welded mesh shall be deemed to be included in unit rate quoted by the contractor complete all as specified and as directed.
M & L for applying white wash of 3 coats as in ceiling incl preparation newly plastered surfaces as specified and directed.
Material and labour for preparation of new plastered surfaces on walls and applying two coats of oil distemper over one coat of chalk whitening complete all as specified.
Material and labour for preparation of new plastered surfaces on walls and applying two coats of oil distemper over one coat of chalk whitening complete all as specified.
G S TRADERS
NATIONAL BUILDERS
PAUL CONSTRUCTION CO.
M/S Kuldip Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .