Repair/maint of GI pipe lines including fitting fixtures and cleaning of OHT and connected items at 19 Wing under GE(AF) Borjhar

Amount

M & L for cleaning of building service tanks PVC of 19 Wing area of n exc 250 lites capacity situated at various places through machenical tank cleaning process by involving the following five (5) stages of cleaning process shall be carried out as given below :- (a) De-watering PVC tank through was out pipe completely. (b) Total removal of sludges by suction pumps completely. (c) Cleaning of walls, ceiling and floor by high pressure jet of 80-180 bar pressure & inspecting for craks if any completely. (d) Removal of addl sludge by industrial vacuum pump completely. (e) Antibacterial treatment of inside of tank to make it completer bacteria free and completely. Note :- 1. The entire work should be carried out ty TANKCLEAN process by any franceised or M/S TANKCLEAN (Pvt) Ltd or any other MES approved firm having equivalent technology. 2 Entire T & P should be arranged by the contractor at their own. Only electric power & water shall be supplied by MES at stipulated rate. 3. (a) Date of cleaning , (b) Due date of cleaning (C) GE (AF) Borjhar, should be written over the outer surface of tank by synthetic enemel paint with lettering not less than 100 mm height. Cost of the same is deemed inclusinve in the quoted unit rate of cleaning of tank.

All as per above item No 1 here-in-before but PVC tank capacity exc 250 liters and not 500 liters.

All as per above item No 1 here-in-before but PVC tank capacity exc 500 liters and not exc1000 ltrs.

All as per above item No 1 here-in-before but RCC tank capacity exc 500 liters and not exc1000 ltrs.

Disconnecting of old existing tanks of any description exc. 250 litres capacity and removing from site complete all as specified and as directed.

All as per Serial item No. 5 here-in-before but exc. 500 litres capacity.

All as per Serial item No. 6 here-in-before but exc. 1000 litres capacity.

S & F 250 liters rotaional moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc, cimplete as specified in SSR Part-I complete all as directed by Engr -in-charge.

S & F 500 liters rotaional moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc, cimplete as specified in SSR Part-I complete all as directed by Engr -in-charge.

S & F 1000 liters rotaional moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pip etc, cimplete as specified in SSR Part-I complete all as directed by Engr -in-charge.

S & F in repairs lid for polyethelene water storage tank exc 250 ltr and n exc 500 ltrs including fixing PTMT nuts/binding wire complete all as specified and directed.

S & F in repairs lid for polyethelene water storage tank exc 500 ltr and n exc 1000 ltrs including fixing PTMT nuts/binding wire complete all as specified and directed.

S & F in repairs lid for polyethelene water storage tank n exc 1000 ltrs including fixing PTMT nuts/binding wire complete all as specified and directed.

S&F in repairs 15 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 20 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 25 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipecomplete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removing from sitecomplete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connections including cleaning for refixing or removing from sitecomplete all as specified and directed.

Refixing old steel tubing, 15 mm bore, and connections with new or old position (Walls, ceiling, floors, etc.) Note :- Steel tubes obtained from item No. 17 above shall be used under this item.

Refixing old steel tubing, 20 mm bore, and connections with new or old position (Walls, ceiling, floors, etc.) Note :- Steel tubes obtained from item No. 18 above shall be used under this item.

Refixing old steel tubing, 25 mm bore, and connections with new or old position (Walls, ceiling, floors, etc.) Note :- Steel tubes obtained from item No. 19 above shall be used under this item.

Supply and laying 15 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

Supply and laying 20 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

Supply and laying 25 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

Supply & Laying 3 Layered PP-R (Polypropylene Random Copolymer) Pipes 16mm Outer Dia (Bore) ISI Marked PN-16, SDR 7.4 UV Stabilised and Anti-Microbial Fusion Welded having Thermal Stability for Hot and Cold water Supply including all PP-R Plain and Brass Threaded Polypropylene Random Fittings (such as Bends ,Elbows, Tees, Short Pieces ,Connectors, Back - Nuts Capps,Plugs, Unions etc) Laying in Trenches/Floors/Ducts or Fixing to walls, etc, and also Cutting of pipes as required , comlete as all specified and as directed. MAKE :- SFMC/WETFLOW/FUSION.

All as per Item No 26 here-in-before, but PP-R (Polypropylene Random Copolymer) Pipes 20 mm outer Dia (Bore), ISI Marked PN-16.MAKE :- SFMC/WETFLOW/FUSION.

All as per Item No 26 here-in-before, but PP-R (Polypropylene Random Copolymer) Pipes 25 mm outer Dia (Bore), ISI Marked PN-16.MAKE :- SFMC/WETFLOW/FUSION.

S&F in repairs 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 455 gms) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for. complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in platform over roof for PVC tanks finished even and smooth without using extra cement all as directed.

Cutting holes in brick walls for inserting Water pipe line and making good dismantled portion by filling cement concrete 1:3:6 Type C-1 exc half brick but n. exc one brick including existing surface finishes complete all as specified and directed

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc complete all as specified and as directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick concrete on internal surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying three coats of white wash on walls including preparation of newly plastered surfacescomplete all as specified and as directed.

S&F in repairs PVC connection 15 mm dia 600mm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 450mm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

S&F in Pillar taps,15mm dia fancy type with capstan heads,chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts,screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair pillar tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 110gms) complete all as specified and as directed.

S&F in repairs 15mm dia of fancy type chromium plated Angle stop valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm dia of fancy type chromium plated Angle stop valves, of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs of 15 mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs 15mm dia stop valves, of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs 15 mm dia bib tap cast copper alloy CP fancy type with capstan head long body and cup screwed down for iron pipe all complete all as specified and directed.

S&F in repairs Bib taps 15 mm bore standard of PTMT high pressure screwed for iron pipe and fixed minimu all as specified and directed.

S&F in repair for Brass chromium plated shower rose 125mm size with arm 15 mm bore complete all as specified and directed by Engineer-in-charge .

S&F in repair for. Swivel shower of PTMT any colour for fixing with 15mm pipe. Minimum weight 40gms) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for Glazed ceramic tiles in vertical surface 350x 250x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick cement mortar 1:4 rendering complete all as specified and as directed.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement mortar 1:4 beddingcomplete all as specified and as directed.

S & F in repairs viterous China Wash Hand Basin white, flate back, size 550 x 400mm including 15mm dia pillar tap, cast copper alloy, with capstan head cp, screwed down high pressure with or without letter Hot or Cold with long screwed shank and fly nut including PVC water pipe 32mm bore and PVC connection suitable for 15mm bore pipe 60cm long with nut and washers at both ends and cp waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of 25 by 25 by 3mm thick angle iron of required length fixed to wall with PCC type B-0 (1:2:4) including cutting for a pinning in a brackets complete all as directed by Engr-in-Charge.

S&F in repairs sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM (1:3) or PCC (1:2:4) type B0, complete, including taking down old unserviceable sink complete all as specified and directed.

Cutting of saplings of any size from bulidings in any situation & at any height including removal of roots from roof/wall including applying root killer chemical as per manufacturers instructions and making good disturbed portion with PCC 1:2:4 Type B0 (using 12.5mm graded stone aggregate) complete finish with cement mortar (1:4) as specified and as directed.

S & F in repairs for PVC low level flushing cistern 10 Ltr capcity Valve less duel symphonic action type, flushing cistern , low level white, with inlet ball valve flat and handle including PVC flush pipe 32mm bore and mild steel brackets made out of 25 by 25 by 3mm thick angle iron of required length fixed to wall with PCC type B-0 (1:2:4) complete all as directed .

S & F in repairs hand shower (health faucet) ABS body mile steel chromium plated for 15mm dia, 1.25meter long flexible tube and ABS wall hook including making connections and fixed in postion complete in all respect as specified.

S&F in repairs CP hand shower (Health faucet) with 8 mm dia, 1 metre long flexible tube and wall hook with NRV (Black flow preventor) (Make Jaquar, Cat No ALD CHR -583). Complete all as specified.

S & F in repairs viterous China Wash down water closet Pan 'Pedestal Pattern' white with seat cover white closet pattern with flat battom and cover mild steel chromium plated or aluminium anodised hinging device and joints etc and connection to drain, flushing ,pipe, anti symphonage pipe and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concerete 1:2:4 type (B-0) complete all as directed .

S & F in repairs squatting pan vitreous china orrisa pattern of Size 580mmx440mm "white" with integral foot rest (Excluding flushing cistern and flush pipe) including provision of cement concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe etc complete making good to floor complete complete all as specified and as directed.

S & F in repairs in repairs viterous china Urinal half stall type, white including providing & fixing plugs, beddinjg urinal against wall in cement mortar (1:2) securing to plugs with & incl 60mm long brass screws, pointing around urinal back in cemnet, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified & directed.

S & F in repairs for PVC waste coupling 32mm dia PTMT(half or full threaded) suitable for WHB/Sink (min wt 450 gms), completed all as specified & directed

S&F in repairs in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long complete all as specified and as directed.

S & F in repairs Tubular Towel Rail 600mm long PTMT fixed with and including Chromium Plated brass screws and wooden/plastic cleats(Minium weight 90 gm) complete all as specified and as directed.

S&F in repairs in repairs Soap dish, viterous china white approximate size 160X160X90mm complete all as specified & directed

S&F in repairs Toilet paper holder , viperous china box type complete all as specified & directed

S&F in repairs in repairs Grating doom 125mm dia with waste hole of PTMT and CP complete all as specified & directed (Minium weight 40 gm)

S&F in repairs stainless steel plate rack for kitchen utensil out of .63mm thick sheet of size 600 x 750 x 250 mm fixed to wall with screws complete all as specified & directed by Engr-in-charge .Make- Prayag Polymers Ltd/Jain Brothers Sanitation Pvt Ltd/ Nirali

Ms Jahnabi Construction

ANZ CORPORATION