WBPWDTE/EE/BED/NIQ_13/Q of 2024-25

Amount

Providing on hire basis following switches etc. on wooden plank board or suitable angle iron frame incl. Providing interconnection wiring with socketing, earthing attachment etc.and dismentaling at the of end function (with PWD / E.I.C. approved materials) 415V, 63 amp TPN switch with rewirable fuse

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

415V, 100 amp, Offload Change Over Switch

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

240V, 32 amp DP switch with rewirable fuse

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Providing on hire basis following switches etc. on wooden plank board or suitable angle iron frame incl. Providing interconnection wiring with socketing, earthing attachment etc. and dismentaling at the of end function (with PWD / E.I.C. approved materials) 415V, Upto 6 Way TPNBDB With 1 No. - 63 amp.FPMCB as Incoming & 15No. 6-32 amp SPMCB as Outgoing

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Providing on hire basis following switches etc. on wooden plank board or suitable angle iron frame incl. Providing interconnection wiring with socketing, earthing attachment etc. and dismentaling at the of end function (with PWD / E.I.C. approved materials) 240V, 2+12 Way SPNBDB With 6 - 32 amp SPMCB as Outgoing & 40/63 amp DPMCB as Incoming

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Providing on hire main wiring with 1.1 KV grade Aluminium Conductor PVC / XLPE armoured cable of following sizes including laying in trench (at least 230 mm below ground) including dismantling the same and mending good the damages. (a) 4 Core 25 Sq. mm PVC / XLPE armorured cable per meter

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

(b) 2 Core 16 Sq. mm PVC / XLPE armorured cable per meter

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Distribution wiring in 2 or 3 x 1.5 Sqmm single core PVC copper wire to light/fan points incl. fixing holder, switch and double board etc. complete on hire basis and dismantling the same (Av. Run 6 mtr.)(considering 03 nos fittings per loop)

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Supplying & Drawing on Hire Basis Single Phase Dist Wiring With 2.5/ 4/6 Sqmm with Earth Wire (1x 2.5 / 1x4) Sqmm Or its equivalent PVC copper wiring in suitable alkhathene pipe on the hire basis incl. dismantling the same per meter

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Supplying & providing 1 no Seperate 6 amp plug and Switch with 150X100X65mm MS/TW switch Board on Hire basis and dismantaling the same

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Supplying & providing on hire basis 100 watt LED Flood light complete with bracket and clamps on the pole including dismantling incl. replacement of fused lamp (As per approved by E.I.C.)

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Supplying & providing single LED fitting complete with tube, commercial type (4 ft) fitting on hire basis and dismantling the same (As per approved by E.I.C.).

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Supplying & providing on hire basis pendent light fittings with 18 watt LED lamp holder shade etc. complete including dismantling the same

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Supplying & providing on hire basis 240V A. C. 1200 mm / 48" sweep ceiling fan with down rod as required & dismantling the same

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Supplying & providing on hire basis 240V A. C. 600 mm / 24" sweep Air Circulater and dismantling the same

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Providing & Earthing on hire basis with 50 mm dia GI Pipe 2.5 to 3 mtrs. Long and 6/8 SWG GI wire with galvanized nuts and bolts washer etc. below ground level on hire basis and dismantling the same(04 nos for 02 nos DG set & 02 nos for system earthing in each center)

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Supplying & providing & connecting with Existing electrical panel ( With appropriate cable supplied by Contractor )on hire basis different KVA Three phase DG set of Follwing Ratings and dismantling the same, excluding fuel charges (3Ph 10KVA DG set)

(i) Up to 3 days -

(ii) Next 7 Days after 3 Days.

Deployment of One no. Electrician & One no. Helper per shift per day (i.e. Total 3 nos Electrician & 3 nos Helper per day for 24 Hrs) for carring out all kind of EI maintenance & DG operations etc. For 10(Ten) days (attendance sheet is to be submitted)

Consumption of HSD oil for 10 KVA DG Set. (log book is to be submitted) [*GST is not aplicable in this Item]

a) for the area where grid electricity is avilable (3 Ltr per hour per DG x 2 hours per day x 10 days x 4 nos DG set)

b) for the area where grid electricity is not avilable (3 Ltr per hour per DG x 8 hours per day x 10 days x 4 nos DG set)

BISWAJIT CHOWDHURY

KARMAKAR ENGINEERING WORKS