Refurbishment with allied electrical works and office setup at Assistant Engineer Water Works Office A Ward.

Amount

32 Amp. 240V SPN Switchfuse unit with CRCA sheet steel powder coated enclosure with rewirable fuses

IP 42 Wall/column Mounted distribution board with one Nos of DP 16/32A MCB as incomer and 8 Noss 6A/10A SP MCB as outgoing (12 way SPN DB)

ELCB with 100mA Sensitivity 40Amp. 2Pole

1st category Al armoured cables FRLS outer sheathed- 2C x 10 Sq.mm

Cable End Termination For Aluminium Cables – 2C x 10 Sq.mm

Submains FRLSH Casing N Caping - 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire in 20 x 12 mm (1/2")

Submains FRLSH Casing N Caping - 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20 x 12 mm (1/2 in)

Submains FRLSH Casing N Caping - 2 X 4 sq. mm + 1 X 4 sq. mm earth wire in 25 x 12 mm ( 3/4 in)

Light /Fan / Ex. fan Points

2/3 Pin Independent Plug (IP)

Bell Point with Bell / Buzzer & 1 Bell Push

15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch

5A/6A - 3/5 Pin Plug On Board

1x28W, T-5 Fixtures, comprises of M.S.Powder coated with end cap. The fixtures complete with high efficiency electronic ballast and PF= 0.98 complete with bright reflector & T-5 lamp

Ceiling fan of 1200 mm sweep with all accessories including Electronic Regulator for completing installation

Fan safety rope/ Fan wire.

Earthing Continuity Conductors -Bare G.I. Conductor size 8 SWG

Cat 6 Gigabyte

Switch BOX point for computers through Casing-Capping Description of Item8Modular SURFACE BOX - 1 No.8Modular PLATE - 1 No.INDICATOR LAMP - 1 No.15A SWITCH - 1 No.6A 5 PIN SOCKET - 3 Nos.2Modular SURFACE BOX - 1 Nos.2M PLATE - 1Nos.RJ11 SOCKET - 1 Nos.RJ45 SOCKET - 1Nos.

PVC Telephone Cable -2 pair

25 mm X 12 mm - Casing-Capping

Providing and fixing of Modular table of required size. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc.complete. 900 x 600 x 750

Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on all sides / surfaces. All edges of the work surface shall be provided with machine pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets whichshould be integrated into the partition frame. Gable End Supports of approved profile and design between tables consisting of 18mm Marine ply (IS 710 : 2010) panels duly edge bound (to be integrated with the partition. Adjustable levellers to be provided to supports.) etc. complete.1500 X 600 & side 900 x 450

Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on all sides / surfaces. All edges of the work surface shall be provided with machine pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets whichshould be integrated into the partition frame. Gable End Supports of approved profile and design between tables consisting of 18mm Marine ply (IS 710 : 2010) panels duly edge bound (to be integrated with the partition. Adjustable levellers to be provided to supports.) etc. complete.1500 X 600 & side 900 x 600

100mm Thick Wall Partition in Plywood with Veneer Lamination:Wall Partition 100mm thick to be fabricated with Sal Wood Framing and on both 10mm thick Plywood with 4mm thick Veneer laminate from floor level upto 2.4m height. 4mm Veneer laminate to have 10mm groove pattern

Mid Back seating

VISITOR CHAIR

Exterior Doors Replacement with New Door with Veneer Lamination and acoustical installations. 35mm thick Ply Doors:

Providing and supplying Modular CUPBOARD made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces etc. complete. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins etc. complete.Storage Back made of 9mm thick Marine ply (IS 710 : 2010) etc. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support etc. complete. Multipurpose lock, Levelling Bolt with inserts etc. complete. Aluminium furniture feet – Round tube, diameter 40mm with 100 mm height with suitable finish to match handles’'Shape SS Brush finished handles as indicated in the drawing, suitable locking provision etc. complete. 900 x 450 x 1950 - 4 SHELVES

Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion madewith foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and coveredwith foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I-Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc.complete. complete.2 seater

Providing and fixing in position Curtain rod of aluminium powder coated circular tubular section including the fixing sockets on both sides.

Stitching of Curtains for windows and doors and fixing the same with approved fabric and buttons, accessories, etc complete.

Painting of ceiling, beam & walls

SEVALAL ENTERPRISE (BID ID -6849287)

Swami Enterprises (BID ID -6839997)