15TH FC- TIEDGRANT 2023- 2024 2ND INST PROVIDING NEW BOREWELL WITH SUBMERCIBLE MOTOR AT 2ND WARD KAMATCHIAMMAN KOVIL STREET,12TH WARD WILSON SODA COMPANY STREET,15TH WARD CHURCH STREET 1 TO 6 AND SUPPLY AND DELIVERY OF BORE WAELL SUBMERCIBLE MOTOR PU

Amount

Laying and Jointing PVC Pipe. Heading

Charges for conducting Geological survey

Drilling of 150mm dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labor charges etc

up to 150m Below Ground Level

From 151m to 180m

From 181m to 210m

From 211m to 240m

From 241m to 270m

Supply and fixing of 150mm CS dia PVC casing pipe including cost of materials and all labor charges etc.,

Supply and delivery of Water supply Materials inculding loading, unloding and transporting etc., complete

3 HP Submercible motor (Motor should give 50lpm x 275 m head)

3 HP Panel board

4.00 sq.mm submercible cable

32 mm dia ISI UPVC Column Pipe

1000 litres capacity HDPE tank

32 mm dia.G.M.Non-Return Valve

32 mm dia. G.I.Hex Nipple

32 mm dia. G.I Union

32mm dia ISI G.I. Pipe

32 mm dia. G.I Ellbow

32 mm dia. G.I coupling

25mm dia ISI G.I Bend

25mm dia ISI Waste Not Tap

Adopter

Bore Kitty

Bore Cover End Cap

32mm dia ISI Gate valve

2 HP Submercible motor (Motor should give 20lpm x 150 m head) (Stand By)

2 HP Panel board (Stand By)

Supplying and fixing of 32A aerial fuse unit for 3 Nos fuse units (500v) on suitable TW concelled box with hylam sheet on the tapping pole with necessary clamps. (SD132)

Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade on 7/20 GI bearer wire for service connection mains(SD68)

Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade in 32mm GI Pipe suitably bent at both ends with necessary angle iron upright and end supports for mains(SD73)

Supply and fixing of TNEB meter board suitable for 32A Three phase service connection with 32A fuse unit (500V) 32Aneutral link and earth link (1"X1/8"copper flat) on TW plank of size 600mmX450mmX19mm with supporting TW reepers of 1" tk.on either side (SD127)

Labour charges for the erection of submersible pumpset in borewell /openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter,Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.

Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Brick Work in Cement Mortor 1:5 Mix (one part of cement, five part of M- Sand ) using new best country Bricks of size 8 ¾” x 4 ¼” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supply and fixing of Flooring with cuddappah slab of 50 mm thick for cupboard arrangement including polishing etc., including cost of all materials to site and all labour charges for laying, pointing and proper curring etc., Complete as per Standard Specifications Rate for 10 Sqm., complete and as directed by departmental officers

Plastering in Cement Mortor 1:5 Mix (one part of cement, five part of M-sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2. such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., the existing red oxide priming coat in all floors excluding cost of priming coat etc complying with standard specification

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm and as directed by departmental officers

D RAJAGANESH CONTRACTOR