PROVISION OF TECHNICAL STORAGE SHED NEAR BLDG NO 69 AT BQM AREA OF MCEME UNDER GE MCEME SECUNDERABAD

Amount

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in hard/dense soil complete all as specified and directed.

Excavating over areas, exc 1.5m but n exc 3.0m deep & getting out in Hard / dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work for rough finished flat surfaces complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete complete all as specified and directed.

M&L RCC type B1 1:2:4 ( 20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC type B1 1:2:4 ( 20mm graded stone aggt) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L RCC type B1 1:2:4 ( 20mm graded aggt) in Columns, pillars, piers, posts and struts complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending sprially for columns, hooks ends and binding with Mild steel wire (annealled) not less than 0.90mm dia (or) securing with clips complete all as specified and directed.

All as per item No. 10 above but 8mm dia and over upto and including 10mm dia in stirrups spaces and bendings complete all as specified and directed.

M&L for Stone masonry regular course secunderabad type as in walls built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surfaces finished even and smooth (without using extra cement) over external face of walls complete all as specified and directed.

M&L for preparation of new surfaces of walls etc, and applying two coats of acrylic emulsion paint ( Apex ultima protech of asian paints or equivalent ) over one coat of external primer complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar 1:6 including finishing even and smooth without using extra cement on internal faces of walls complete all as specified and directed.

M&L for applying two coats of OBD over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as specified and directed.

M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for Cement concrete type D2 1:4:8 (40 mm graded stone aggt) 100 mm thick as in sub base to flooring complete all as specified and as directed by Engineer in charge

M & L 70 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) hard standing, finished even and smooth with out using extra cement complete all as specified and directed.

M& L for Mastic flooring work 50 mm thick ,Bitumen 85/25 Grade @15kg/Sqmt , Lime powder @ 30 kg/Sqmt ( Calscium Carbanate content not less than 80 % by Wt), Fine aggregate and course aggregate @ 54 kg/Sqm) Job mixing formula percentage should be Course aggregate and fine aggregate 55 % , Lime 30 % and Bitumen 15 %, cleaning the surface , applying a water base primer shalikot T-30 @0.30Kg/Sqmt and it should be free from moisture and dust heat the mixture of Bitumen,Limepowder and Fine Aggregate in Plate 225 degree celsius after above process, apply the mixture on the surface area @ temperature of 180 degree celsius manually and allow it to dry complete all as specified and directed. Note:- Laying shall be carried out by authorized applicator of manufacturer as approved by Engineer-in-charge

M&L screed or bedding layer of mortar 20 mm thick for laying floor finish in CM 1:6 complete all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick in raiser of steps,skirting ,dado etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 finished rough to receive wall tiles etc. complete all as specified and directed.

M&L for Rubber tiles ( thickness 20 to 25) plain or coloured matt or glossy finish in floors with approved adhessive complete all as specified and directed.

S&F Mild Steel bolts purpose made , with Hexagonal or square heads at one end and screwed the other ,diameter of neck 12 to 20 mm complete all as specified and directed.

S&F Mild Steel plates,plain or chequered forming holes, without any attachement conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins here connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates quality conforming to Fe 410W(Gde-250) complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forged into spikes; framed gratings & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&Lfor Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M/L Pre-painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick,on any colour, having tensile strength of 550 Mpa as in roof fixes with self tapping screws complete all as specified and directed.

S&F Pre- painted plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for PCC (1:3:6) type C1 using 20 mm graded aggregate as in plinth protection/ Paths of average 75mm thick. Finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in copings around th epaver block for setting etc including weathering, slightly rounded or chamfered angles and throating and including necessary form work complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 1.25mm thick mild steel rolling shutter,without ball bearing, as specified including top cover, ancoring rod, hasp and staple and shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

M&L for joist, channel, angle or 'T' sections, Fe-290 ( Gde E 165) fixed independently, without connecting plates etc. complete all as specified and directed.

M&L for Ball bearing for rolling shutters fixed complete all as specified and directed.

M&L for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated soil exc. 250m but n exc 500m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc fixed in to steel /wooden frame .complete all as specified and as directed by Engineer-in-charge.

S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as per specified and directed.

S&F in repairs PVC laminated designed (one side pavc lamination and other side aluminium paper) gypsum board 600 X 600 X 8mm thick decorative type fixed in aluminium frame work with screws or nails etc complete all as specified and as directed by Engineer-in-Charge.

Supply only ABC Powder type ( Stored Pressure) Fire Extenguisher 9Kg capacity ISI marked IS :15683 suitable for class 'A', 'B', & 'C' Fire consisting of welded cylinder, squezze lever discharge valve fitted with pressure indicate gauge, internal discharge tube , discharge hose with nozzle, suspension bracket , duly charged with ISI marked Mono Ammonium Phosphate base ABC powder confirming to IS ; 14609 and pressurized with nitrogen gas, suitable for operating between (-) 10 degree centegrate to (+) 55 degree centegrate IS: 15683 complete all as specified and directed. Make:- Nitin/Safex/Ceasefire

B AND H CONSTRUCTIONS

BHEEMRAO PATIL CONTRACTOR

NARAYANA CONSTRUCTIONS

M/s D.Krishna Varma

Himagiri Constructions

P VIJAY KUMAR

SAI RUPA CONSTRUCTIONS

STANDARD AGENCIES