CLEANING TO SEWAGE LINE, MAIN HOLES AND CERTAIN REPAIR/ MAINT TO DRAINS, SEWAGE LINE, MANHOLE, PATH, HARDSTANDING, FENCING, BOUNDARY WALL AND OTHER MISC MAINT TO MD ACCN AND OTM ACCN AREA AT SANYAT LINE, KARAM VIHAR, TIGRIS MOUDE LINE, SUMERAIN LINES

itemH1Code55

Material and labour for cleaning & clearing manholes by taking off manhole covers and re-fixing the same after cleaning of any description, underground any depth by removing any type of blockage including de-silting and de-chocking and flushing after cleaning, clearing of manholes. Sludge/ sludge water shall be disposed off in closed container at authorized dumping site declared by local administration outside MoD land as directed by Engineer-in-Charge, upto 150mm

itemH1Code109

M&L for TMT bars of 8 mm dia and over, cut to lenghth bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified.

S&F Factory made precast perforated heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with size 1.00mtr x 0.50mtr x 75mm thickness complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins arches, pillers etc but excluding ashler facings dressed stone work and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.

M&L for brick work straight or curved on plan exc 6m mean radius in cement mortar (1:4) with Sub class ‘B’ brick including manhole raising,drains,septic tanks footpath,boundary wall etc complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed.

Running metre

M&L 15mm thick rendering in cement mortar 1:4 on other than fair faces of new or old brick work or concrete work, finished even & smooth without using extra cement complete all as specified and as directed.

Cleaning of septic tanks/soakage wells/sewage lines using Mechanically operated 25 tonne truck mounted desludger with 12000Ltr capacity tanker having water fitted high pressure jet machine for cleaning and desludging of sewage line, shall be used by the contractor as per scheduled programme in writing and completion of each job to the entire satisfaction of Engineer-in-Charge as instructed. (NOTE : In case contractor fails to deploy the machine as per scheduled programme a damage of Rs 1000/- per day shall be deducted from his payment.)

M&L for preparation of newly plastered or unplastered wall surfaces and applying two coat of acrylic emulsion exterior quality over and including a coat of water based primer tint and pattern as approved by GE complete all as specified.

S&F 110mm internal dia PVC (SWR) pipes single socketed in any length with rubber led joint laid in trenches/ fixed to wall with MS clamps including taking down pipes complete all as specified and directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F DWCPE (SN8) nominal size 200 mm (internal dia) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints aid in trenches/fixed to wall including clamps as required, fixed as in repair complete all as specified.

Excavation as in trenches in any type of soil not exceeding 1.5 metres wide and not exceeding 1.5 metres deep lines and getting out complete all as specified and directed by Engineer-in-Charge.

Removing excavated material/Malba to a distance exceeding 1.5 KM and not exceeding 5 KM depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.

S&F in repairs of 75mm diameter of outlet in mm PVC (SWR) floor trap/Nahani trap with stainless steel gratings including jointing with solvent cement, complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm internal dia after they are laid and tested complete all as specified and directed by Engineer-in-Charge.

Supply & fixing as in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pining in ends of brackets, fixed as in repairs complete all as specified & directed.

Cleaning and removing all scale and dirt, etc, from water tanks, capacity exceeding 250 litre but not exceeding 500 litre and from mouths of circulating pipes etc. by emptying, drying, cleaning by scrubbing the dust with wire brush from tank by removing inlet and outlet pipe and refixing inlet and outlet pipe with new tank connection fitting in the same position after cleaning and writing "Tank Cleaned on DD/MM/YYYY"using synthetic enamel paint of letters not below 15 cm height complete all as specified and directed.

S&F as in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed for 20 mm bore pipe, complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching for manholes and haunching around manholes frame for setting, coping, holdfast fixing etc including use of necessary form work and finishing exposed surfaces even and smooth using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains finished even and smooth including use of necessary form work and finishing exposed surfaces even and smooth using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old pipes complete all as specified.

S&F CPVC Brass FTA female adaptor fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

Supply and fixing 15mm dia PVC connection with brass nut, of length 600 mm,fixed as in repairs, complete all as specified and directed.

S&F as in repairs Chromium plated shower roses 125 mm size fixed with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

Supply and fixing in repairs brass chromium plated tubular towel rail 20mm dia 60 cm long between flanges, fixed to walls with necessary screws complete all as specified

S&F in repairs CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as specified and directed.

S&F Poyethalene syphon kit assembly (any type as per requirement at site) for PVC Low level flushing cistern, fixed in repairs, complete all as specified and directed.

Dismantling water tanks and removing from site of 500 litres capacity complete all as specified and directed.

Providing services on related to plumbing work carried out by deploying a team of plumbers with helper as required for 01 x shaft area of multistory (G+8) building from top of roof slap up to bottom of bldg floor wise through shaft area in one go for repair / maintinance to leakageing , damaged , broken , loose PVC (SWR) Pipe/CPVC Pipe (any dia and size) , bends etc including taking down, easing and refixing in the same position as required etc complete all as specified and directed. Note :- (1) In case contractor fails to complete the above task as per scheduled programme a damage of Rs 500/- per day shall be deducted from his payment. 2) Necessary T&P, ladders,minor consumable viz white cementetc, equipments and safety gear shall be provided by the contractors. 3) All material/ accessories/Items as required for maintenance shall be measured under relevant item of BoQ. (4) The above work /task will also include for High rise bldgs and shaft area of high rise bldgs (One shaft work as one Job)

Dismantling water tanks and removing from site of 1000 litres capacity complete all as specified and directed.

S&F 1000 litres capacity (triple layered) Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed

S&F in repair PVC waste pipe 32mm/40mm dia fixed complete all as specified & directed

S&F CP grating droom of size 100/125/140 mm in round or square shape for out let of water etc complete all as specified and directed by Engineer-in-Charge.

Demolition of plain cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level complete all as specified & directed.

M & L for machine made Rubber moulded prepolished colored precast concrete interlocking paver block of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over and including 25mm average thickness sand cushioning complete all as spfd and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid dry in any mortar complete all as specified & directed

M&L machine cut Granite slab 16 to 18 mm thick fixed as in repairs for dado, wall cladding, garden walls, staircase, steps, pillars,skirting/dado, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.11 Sqm but n.exc 0.18 Sqm in floor set & jointed in neat cement slurry and pointed in coloured cement to match coloure tiles laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in Charge.

M&L for 100 mm thick cement concrete type D-2,1:4:8 (using 40mm graded stone aggt) as in sub floors, filling and mass concrete etc complete all as specified.

Supply and fixing factory made prepolished chequred cement concrete coloured tiles 300mm x 300mm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:6, complete all as specified & directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 Sqm but n.exc 0.36 Sqm in floor set & jointed in neat cement slurry and pointed in coloured cement to match coloure tiles laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in Charge.

Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed.

M&L glazed ceramic tiles 300x450x7 to 8 mm thick coloured tiles in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado including highlighter tiles over 10mm thick cement plaster in CM (1:4), complete all as specified and directed. Note: Pattern of tile shall be approved by GE

M&L vitrified ceramic tiles light shade 8 mm to 9 mm thick (square/rectangular) polished,area of each tiles exc 0.16 sqm but n.exc 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 15mm thick screed bed in CM 1:6, complete all as specified and directed. Note: Pattern of tile shall be approved by GE

Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of cement base paint over a coat of alkali resistant water base primerincluding necessary scaffolding where required complete all as specified & directedComplete removal of the existing treatment

Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, angle post etc. complete all as specified and directed by engr-in-charge

Supply & fixed in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engr-in-charge

S&F mild steel work as in joist channels, angle or tee section, fixed independently w/o connecting plate conforming to Fe.290.Gde-E-165, incl cutting tops to shape as directed, drilling holes,notching for wire, welding work etc. flat iron fillets incl all necessary drilling, bolting or riveting, etc. ,drilled and countersunk for balusters running bars, nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts;, and similar work including necessary cutting,drilling,welding etc. complete all as specified and directed by engr-in-charge

S&F in repairs of concertina coil fencing with punched tape, 600mm dia, , having 50 Nos rounds per 6m length, laid on ground or fixing the same on Y-shaped angle iron with necessary G.I staples / GI clips to retain in horizontal position including necessary bolts, fasteners and binding wire complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including 1 mm thick wall care putty complete all as specified & directed.

S & F Mild Steel Framed work as in Gate of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills,tubular trusse and similar work etc Fe.290.Gde-E-165 complete drilled for fixing of steel sheeting or other covering including welding work ,(PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks,hinges,necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as spfd and directed by engr in charge.

M&L for preparation of newly steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamal paint of tint as approved, complete all as specified and directed.

S&F in repairs of concertina coil fencing with punched tape, 450mm dia, , having 50 Nos rounds per 6m length, laid on ground or fixing the same on Y-shaped angle iron with necessary G.I staples / GI clips to retain in horizontal position including necessary bolts, fasteners and binding wire complete all as specified and directed.

Supply and fixing as in repair 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed.

itemH1Code110

itemH1Code108