Establishment of 50Mx25M Swimming Pool with Diving Pool arrangements at District Sports Complex Madurai

Amount

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Medium rock and dense medium rock not requring blasting - First depth of 2 metre

Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.Including cost of chemicals labour charges,transport and storing etc complete and as directed by the department officers

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Cement Concrete M 25 1:1:2 (One Cement, One M Sand and Two hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Upto basement

Ground floor

Cement Concrete 1:1-1/2:3 (One Cement, One and a half M Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers -Foundation and Plinth

Ground floor

Brick work in Cement Mortar 1:5 using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Inbetween column Up to plinth level

In ground floor

Brick partition walls of 11.50cm thickness using best quality II Class Table Moulded Chamber Burnt Bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three M Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Upto basement

For Plane Surfaces Such as RCC Floor Slab,Roof slab,Beams,Lintels,Bed Blocks,Landing Slab,Waist Slab,Portico Slabs-Ground floor

For Plane Surfaces Such as Rectangular or Square RCC Columns,Sunshades,Top and Bottom slab of RCC Boxing etc

Supplying fabricating and placing in position steel reinforcement using mild steel or ribbed star rods for all RCC works as per the design given including cost of steel and binding wire also in all floors steel and binding wire shall be supplied by the contractors etc., complying with standard specifications.

Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc.,

Overall length

Supplying and fixing of Flush door shutter using Teak wood frame of size 127mm x 76mm and Door shutters Single leaf in position using 35mm thick solid core Flush shutters with teak play on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.

Supply and fixing of FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers.

UPVC Window Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing of M.S.grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Flooring with following Plain ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers

Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M Sand) in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of >25 MPa (as per ASTM D 412), elongation of >500% (as per ASTM D 412), puncture resistance of >1000N (as per ASTM E 154), peel adhesion to concrete >1200N/m (as per ASTM D 903), hydrostatic head resistance >70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self-adhesive polymer layer, etc, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three M Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing and filling the tile joint with epoxy grout with followingspecification:Surface preparation including cleaning the joint to befree from dust and loose particles. Providing masking tape on eitherside of the tile joint edges and providing sealing the tile gap withepoxy tile joint grout and finishing neatly and as directed by theepartmental officers. The rate inclusive of cost of materials andlabour, etc., complete.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M Sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Nosing for Granite Slab

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no M Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three M Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and painting the walls with two coats of wall putty asinstructed by the departmental officers including preparation ofsurface curing, etc., complete in all floors complying with standardspecifications (The wall putty shall be got approved by theExecutive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wallsurface ect., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position white/ colour special delux model glazed cascade type paryware/Hindware/Equivalent wall mounted European water closet of best quality and approved make with 100mm "P" or "S" trap connecting with CI pipe of 100mm dia/ PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing,spun yarn, teak wood plugs,brass screws, etc., including supplying and fixing 10 litres capacity PVC/12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball value with polythene float with brass handle, union cuppling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 nos), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works)with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover.Wall Fitting

Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve,15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc Without Pedestal

Supplying, fixing, testing and commissioning of approved make 15mm CP Concealed Stop cock with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete.

Supplying, fixing, testing and commissioning approved make 15mm CP CP Two Way Bib Cock with Health Faucet with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete.

Supplying, fixing, testing and commissioning approved make Mirror 600X450 with necessary fixing screws etc complete.

Supplying and fixing Angle Cock with new one of approved quality Metro or Equal Brand and approved make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).

Supply and Fixing wall mixer tap of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying, laying and jointing uPVC pipes(Schedule 40) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing uPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

40 mm dia uPVC pipes (Schedule 40)

50 mm dia uPVC pipes (Schedule 40)

UPVC PASTING TYPE SPECIALS FOR SANITARY ARRANGEMENTS

UPVC Elbow Dia 40mm

UPVC Elbow Dia 50mm

UPVC BEND Dia 40mm

UPVC BEND Dia 50mm

UPVC TEE Dia 40mm

UPVC TEE Dia 50mm

UPVC REDUCER Dia 50mm X 40 mm

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

75 mm dia PVC pipe

110 mm dia pvc pipe

160 mm dia PVC Pipes

PVC PASTING TYPE SPECIALS FOR SANITARY ARRANGEMENTS

PVC Elbow Dia 75 mm

PVC Elbow Dia 110 mm

PVC SHOE Dia 75 mm

PVC SHOE Dia 110 mm

PVC Y Dia 75 mm

PVC Y Dia 110 mm

PVC Tee with Single Door Dia 75 mm

PVC Tee with Single Door Dia 110 mm

PVC Bend Dia 75 mm

PVC Bend Dia 110 mm

Supplying and fixing position CI Nahani Trap / Floor Trap of sizes 110 x 75 mm dia (20 mm water seal) with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of M Sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three M Sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

110mm dia PVC Pipe

PVC Specials for Rainwater down fall pipe works:- Dia 110 mm

110 mm dia PVC 6kg pipes

160 mm dia(soil pipe)PVC 6kg pipes

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three M Sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Providing and constructing inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm, benching in CC M-15, internal faces plastered smooth in CM 1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge.

600 x 600 mm size internal and depth more than 450 mm but not exceeding 850 mm

600 x 600 mm size Heavy duty cover

HGS SS.20.B. Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B

Supplying, laying and jointing uPVC pipes(Schedule 40) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing uPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

dia 20mm uPVC pipes 40 Sch

dia 25mm uPVC pipes 40 Sch

dia 32mm uPVC pipes 40 Sch

PVC Specials for water supply arrangements

ELBOW 20mm Dia

ELBOW 25mm Dia

ELBOW 32mm Dia

TEE-Dia 20mm

TEE-Dia 25mm

TEE-Dia 32mm

COUPLER Dia 20mm

COUPLER Dia 25mm

COUPLER Dia 32mm

REDUCER 25 mm x 20 mm

REDUCER 32 mm x 25 mm

REDUCER 40 mm x 32 mm

EXTERNAL WATER SUPPLY SYSTEM FROM OHT: Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

PVC pipes 32mm dia (having working pressure 10 kg. / sq.cm)

PVC pipes dia 40mm (having working pressure 10 kg. / sq.cm)

PVC pipes dia 50mm (having working pressure 10 kg. / sq.cm)

PVC Specials for water supply arrangements

ELBOW Dia 40mm

ELBOW Dia 50mm

COUPLER Dia 40mm

TEE Dia 40mm

REDUCER 40 mm x 32 mm

REDUCER 50mmx40mm

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Dia 25mm Gun Metal Wheel Valve

Dia 32mm Gun Metal Wheel Valve

Dia 40mm Gun Metal Wheel Valve

Dia 50mm Gun Metal Wheel Valve

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with GI Flush Mounting box and 5A FT switch in flush with wall with Modular cover Plate (Plastic) and making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with suitable model MS box, modular cover plate and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm, MS switch box with Modular coverplate along with 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Supply and laying of 2 x 2.5 sq.mm. (36 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') with necessary accessories and end supports for water pump

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For Water pump)

Supply and fixing of single box type 4'18W LED Tubelight fitting complete with electronic ballast with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting

Supply, installation, testing and commissioning of 18 W LED DOWN LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive. ( SD 530 )

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make)

Supply and run of 2 of 2.5 sq.mm. (36 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable rigid PVC conduit pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 1 of No.8 SWG GI wire for earth connection, including cost of all materials etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp

Supply and laying of 2 x 6 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M Sand and covering the cable completely with bricks and M Sand and refilling the earth to make good

Supply and laying of 4 x 10 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M Sand and covering the cable completely with bricks and M Sand and refilling the earth to make good

Supply and fixing of 5A or 10A or 20A AC single phase 230V, 50 Hz Watt hour metre on suitable TW box complete with earth connections

Supply and fixing of 10A 400V, 50 Hz 3 phase 4 wire watt hour meter on suitable TW box with earth connection

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

FILTRATION EQUIPMENT

Supply of TOTALLY ANTI-CORROSIVE Bobbin Wound filter, 2000mm diameter. Fitted with pressure gauge panel manual air bleeder, water drain and emptying plug. fitted with collector arms and diffuser made from unplasticized PVC and polypropelene with all accessories required. Filtration velocity 40m³/hr/m². Max. working pressure : 2.5 kg/cm². Flow rate: 125m³/hr , outlet size 140mm, Height : 2040mm, Make : Astral / Certikin / Jandy

Supply of Valve Battery Manifold made in PVC with flanges for connecting to filters as per DIN 2501 standards. Consists of set of 5 - buttterfly valves for carrying out filtration, back-washing, rinsing and shut down of the filters. Size : 140mm Make : Astral / Certikin / Jandy

Supply of Valve battery supports made in Zinc Plated Steel. Height : 2.30m. Make : Astral / Certikin / Jandy

Supply of Support Brackets : 2 Support Brackets with anti-vortex clamps and fixing screws For Ø 140 mm pipe. Make : Astral / Certikin / Jandy

FILTRATION MEDIA

Sand media grade 1 / price per 25 kg bag. Make : Astral / Certikin / Jandy

Glass media grade 3 / price per 25 kg bag. Make : Astral / Certikin / Jandy

FILTRATION PUMP

Supply of Cast Iron Pumps 3000 r.p.m. Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel shaft. stainless steel strainer basket. Conn. PN-16 according to DIN2501. Flowrate : 125m3/h @ 12m.head. 10 HP Voltage 400V/ 3 ph. Pump housing and Impeller in cast Iron. (4 working and 1 standby). Make : Astral / Certikin / Jandy

MANUAL DOSING EQUIPMENT FOR pH & CHLORINE

Supply of Membrane Dosing Pumps "EXACTUS" model. Electronic dosing pump to be mounted both on its base as well as hung on the wall. Pumps following CE regulations. IP- 65 protection. Power connections : 220/240V, 50/60 Hz. The materials in contact with liquid are : Ploypropylene, Viton, Teflon and PVC. Includes anti-acid plastic case. Operating panel protection provided by a transparent polycarbonate cover. Lubrication not required. Flow 20l/hr @ 5 bar (pH-4, Cl-2). Make : Astral / Certikin / Jandy

Supply of Semi transparent polyethelene tank with external scale so that levels can be checked easily, capacity of tank 500lts. Make : Astral / Certikin / Jandy

Supply of Agitators for easy installation in the tanks, provided with steering grip in bakelite, rod and propellor arms in PVC, length of stirring rod 900mm. Make : Astral / Certikin / Jandy

POOL BASIN ITEMS

Inlets: Floor Inlets 50mm Made of ABS plastic and screws in stainless steel. Maximum recommended flow rate compliant with standard EN 13451-1: 12 m3/h. Make : Astral / Certikin / Jandy

Pool Drains : Supply of Drain grille in SS 304. 500mm x 500mm Flow: 136m3/hr. Make : Astral / Certikin / Jandy

Overflow Gutter Drains: Drain Grill 200mm Ring support and grille in white ABS. Supplied with grille fixing screws. Flow rate 13 m3/hr. Make : Astral / Certikin / Jandy

Suction Inlet: Supply of Suction inlet in ABS with cap internal thread of 11/2" dia and external thread 2". Make : Astral / Certikin / Jandy

Wall Conduit: Supply of ABS wall conduits 300mm long. Make : Astral / Certikin / Jandy

POOL LADDER: Supply of Overflow 1000 model. Ladder width 500 mm Ø 43 mm handrail, non-slip surface stainless treads, bright satin finish, anchoring fixtures for connection to the equipotential circuit and removable anchoring with plate for fastening to wall. AISI-316 handrail and steps. 4 “Luxe” steps + 1 double safety step. Make : Astral / Certikin / Jandy

UNDERWATER LIGHT: Supply of Underwater LED Warm White LumiPlus Flexi spotlightLight 32 W/12V AC. 4320lm with White Faceplate. Make : Astral / Certikin / Jandy

Supply of Standard Niche. Make : Astral / Certikin / Jandy

Supply of Junction Boxes, made in ABS, composed of 3 entries. 3/4" or PG-16 coupling.

Supply of Cable Conduit Hose, Flexible 1 mt. long conduit for conn. light to junction box. 3/4" and PG-16 threaded ends. Make : Astral / Certikin / Jandy

Supply of Transformer 300 W/12V with protection box. Make : Astral / Certikin / Jandy

GRATINGS: Modular grating 450 x24 mm. Three Pin connection. Make : Astral / Certikin / Jandy

Supply of 90° corner tiles for overflow channels made of white, injection moulded copolymer polypropylene. Height 22 mm, channel width 295 mm. Make : Astral / Certikin / Jandy

MAINTENANCE ACCESSORIES

Supply of Pump caddy for stand-alone pool cleaners. Made of anodized aluminium tube and a 460 mm x 370 mm plastic platform. Face plate in AISI-304 stainless steel. Starter and cable. Make : Astral / Certikin / Jandy

Supply of Victoria Monoblock Pump - 3 HP / Single phase. Supply of Pump. body and support in heat resistant plastic. Shaft with Noryl Impeller. Large capacity strainer. Make : Astral / Certikin / Jandy

Supply of aluminium pool cleaner - 800mm length. 2" connection. Trailing cable 110m. Make : Astral / Certikin / Jandy

Supply of Extensible handles for cleaning attachments in anodized aluminium which can be adapted to the entire range of cleaning equipment, brushes, leaf skimmers and scoops.10.0mts. Long with Handle adaptor. Make : Astral / Certikin / Jandy

Supply of Floating suction hose Made of blue polyethylene. Ø 50 mm (2”) 30 m. Make : Astral / Certikin / Jandy

Supply of Shark leaf skimmers - wing-nut or wishbone fixing. Shark deep water leaf skimmer. Make : Astral / Certikin / Jandy

Supply of Shark leaf skimmers - wing-nut or wishbone fixing. Shark surface leaf skimmer. Make : Astral / Certikin / Jandy

Supply of Shark brushes - wing-nut or wishbone fixing. Shark special bottom curved brush. Make : Astral / Certikin / Jandy

Supply of Shark brushes - wing-nut or wishbone fixing. Shark Shark bottom/walls curved brus. Make : Astral / Certikin / Jandy

Supply of Classic brushes - wing-nut fastening. S.S. bristle 165 mm. Make : Astral / Certikin / Jandy

Supply of Free chlorine and pH Pooltester. Chlorine range: 0.5–6.0 mg/l & ph range: 6.8–8.2. Make : Astral / Certikin / Jandy

Supply, Installation, Testing and commissioning of Control Panel c/w sheet steel enclosure, ELCBs, MCBs, O/L relays for pumps auto / pre-set (on timer) and hand controls for pumps (components are of ABB, L&T, Schneider).

Supply and installation of copper flexible electrical cables with necessary PVC conduirs for the Swimming pool pumps, underwater lights. Make : Finolex / Polycab

1.5 Sqmm x 2 Core

2.5 Sqmm x 2 Core

2.5 Sqmm x 3 Core

4 Sqmm x 4 Core

Supply and Laying of PVC pipes and Pipe fittings with necessary flow markings (10Kg / cm2 pressure). Make: Supreme/Eq (Pump Room is considered 7mtr from Pool deep end)

UPVC 40 Sch 50mm Dia (2")

UPVC 40 Sch 80mm Dia (3")

UPVC 40 Sch 100mm Dia (4")

UPVC 40 Sch 150mm Dia (6")

PVC pipe 63mm Dia 10Kg/cm2

PVC pipe 75mm Dia 10Kg/cm2

PVC pipe 90mm Dia 10Kg/cm2

PVC pipe 110mm Dia 10Kg/cm2

PVC pipe 160mm Dia10Kg/cm2

PVC pipe 160mm Dia 6Kg/cm2

PVC pipe 200mm Dia 6Kg/cm2

PVC pipe 250mm Dia 6Kg/cm2

PVC pipe 300mm Dia 6Kg/cm2

140mm Dia PVC pipe 10Kg/cm2

160mm Dia PVC pipe 10Kg/cm2

200mm Dia PVC pipe 10Kg/cm2

250mm Dia PVC pipe 10Kg/cm2

300mm Dia PVC pipe 10Kg/cm2

Supply and fixing of PVC Valves (10kg/cm2 pressure). Make: Cepex/George Fisher/FIP

Double Union Ball Valve 50 mm

Double Union Ball Valve 75 mm

Butterfly Valve with Flanges - 110 mm

Butterfly Valve with Flanges - 160 mm

Non Return valve with Flanges - 140 mm

Non Return valve with Flanges - 160 mm

Double Union Foot Valve 160 mm

Bolts and nuts with necessary gaskets / washers.

Commissioning of the pool and maintaining the pool for 1 Month including necessary chemicals and manpower.

FILTRATION EQUIPMENTS

Filter: Supply and Installation of TOTALLY ANTI-CORROSIVE Bobbin Wound filter,PRAGA model 2000mm diameter. Fitted with pressure gauge panel manual air bleeder, water drain and emptying plug. fitted with collector arms and diffuser made from unplasticized PVC and polypropelene with all accessories required. Filtration velocity 40m³/hr/m². Max. working pressure : 2.5 kg/cm². Flow rate = 125m³/hr.

Mainfold Valve: Supply and Installation of Valve Battery Manifold made in PVC with flanges for connecting to filters as per DIN 2501 standards. Consists of set of 5 - buttterfly valves for carrying out filtration, back-washing, rinsing and shut down of the filters. Size : 140mm

Supports: Supply and Installation of Valve battery supports made in Zinc Plated Steel. Height : 2.30m

Supply and Installation of Support Brackets : 2 Support Brackets with anti-vortex clamps and fixing screws

Filter Media : Supply and charging of filtermedia to filter 0.4-0.8 mm

Supply and charging of filtermedia to filter 1 - 2 mm

Recirculation Pump : Supply and Installation of Centrifugal Cast Iron Pumps 3000 r.p.m. Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel AISI-420 shaft. With stainless steel AISI-316 strainer basket. Conn. PN-16 according to DIN2501. Flowrate : 125m3/h @ 12m.head. 10 HP Voltage 400V/ 3 ph. (4 working and 1 standby)

DOSING EQUIPMENT

Dosing Pumps: Supply and Installation of Membrane Dosing Pumps "EXACTUS" model. Electronic dosing pump to be mounted both on its base as well as hung on the wall. Pumps following CE regulations. IP- 65 protection. Power connections : 220/240V, 50/60 Hz. The materials in contact with liquid are : Ploypropylene, Viton, Teflon and PVC. Includes anti-acid plastic case. Operating panel protection provided by a transparent polycarbonate cover. Lubrication not required. Flow 20l/hr @ 5 bar

Chemical Storage Tanks: Supply and Installation of Semi transparent polyethelene tank with external scale so that levels can be checked easily, capacity of tank 500lts.

Agitators : Supply and Installation of Agitators for easy installation in the tanks, provided with steering grip in bakelite, rod and propellor arms in PVC, length of stirring rod 900mm

Pool Drains : Supply and Installation of Drain grille in SS 304. 500mm x 500mm Flow: 136m3/hr ( Competition Pool 4 Nos,Training Pool 2 Nos )

Inlets: Supply and Installation of Floor Inlet in ABS.

Overflow Gutter Drains: Supply and installation of 200 drain grille in ABS for Overflow Drain Channel.

Overflow Gratings: Supply and Installation of Made in white, U.V. Stabilized PP. Width: 300 mm, Height : 22mm

Grating Support Profile: Supply and Installation of Made in plastic. Suitable for 35mm high grating Supplied in 2 m length

Corner Tiles. : Supply and Installation of 90° corner tiles for overflow channels made of white, injection moulded copolymer polypropylene. Height 22 mm, channel width 295 mm

Vacuum Head: Supplying of Double Metallic Vaccum Head -800mm with trailing cable

Telescopic Handle : Supplying of Telescopic Pole 3m x 3 pieces

Floating Hose: Supplying of Vacuum Hose 38mm- 2" 30m

Deep Net : Supplying of Deep Bag Leaf Net - Shark Series

Surface net : Surface net made in polypropelene and white

Brush: Supplying of Curved Brush - Shark Series

Algae brush: Algae brushes with stainless steel bristles

Straight brush : Straight brushes made in polypropelene for pool

Test kit: Supplying ofTest kit for free chlorine & pH

Trolley: Trolley with starter and cable

Cylindrical Double Cartridge Filter. Flow rate : 10m3/hr

Victoria Plus Silent Pump 3HP - S. Phase

Underwater Lights: Supply and Fixing of Underwater LED Warm White dc Lumiplus Flexi Spotlight 32W Nitche Type,power pack supplied with FLEXI DC Spot lights

FacePlate: Supply and Fixing of White Face plate for Underwater Light

Conduit and Adaptor: Supply and Installation of Conduit and Adaptor

Junction Boxes: Supply and Installation of Junction Boxes, made in ABS, composed of 3 entries 3/4" or PG-16 coupling.

Flexible Cable Conduits : Supply and Installation of Cable Conduit Hose, Flexible 1 mt. long conduit for conn.light to junction box. 3/4" and PG-16 threaded ends.

Transformer: Supply and Installation of 100VA-12V Transormer

Supply and Installation of Ball Valve dia 50 mm (filling line-3)

Supply and Installation of Butterfly Valve dia 110 mm with Flange,Adaptor and SS Bolts & Nuts etc,. ( Vacuum -4, Pump Suc&Del-12)

Supply and Installation of Butterfly Valve dia 160 mm with Flange,Adaptor and SS Bolts & Nuts etc,.(Main Drain 3 , BT Suction-5,Return 7 Nos,)

Supply and Installation of Wafer Type Check Valve dia 110 mm with Flange,Adaptor and SS Bolts & Nuts etc,. (Filtration Pump Del-6)

Supply and Installation of Wafer Type Check Valve dia 160 mm with Flange,Adaptor and SS Bolts & Nuts etc,. (BT Suction-5)

Supply and laying of 10KG/cm2 Pipe SUPREME or FINOLEX or AJAY make UPVC pipes and PN-16 & Fabricated Heavy fittings (ISI) glue joint Between swimming pool and plant room for re-circulation including puddle flanges, fabrication works etc.,(Assuming 3m distance from to Pool to Plant room

Supply and laying of 32 mm dia 10kg.cm2

Supply and laying of 50 mm dia 10kg.cm2

Supply and laying of 63 mm dia 10kg.cm2

Supply and laying of 75 mm dia 10kg.cm2

Supply and laying of 110 mm dia 10kg.cm2

Supply and laying of 140 mm dia 10kg.cm2

Supply and laying of 160 mm dia 10kg.cm2

Supply and laying of 200 mm dia 6kg.cm2

Supply and laying of UPVC Grey Pipe 315 mm dia (12") PVC 6kg/Cm2

Supply and laying of UPVC Grey Pipe 355mm dia 6Kg/Cm2

Fabrication work for suction and delivery header pipe with necessary PVC welding FRP Coating etc,.

Supply and Fxing of Pipe support Anchoring, GI Clamp, Anchor fastner and 12mm rod with etc,

Supply anf Fixing of LCC Panel for Underwater Light

Supply and laying of 20 mm dia Upvc grey Pipe10 Kg/cm2

Supply of Laying of 6 Sqmm 4 core Copper Armourd Cable For Pump etc,.

Supply of Laying of 4 Sqmm 3 core Copper Flexible Cable For Light,Pump etc,.

Supply of Laying of 2.5 Sqmm 3 core Copper Flexible Cable For Light etc,.

Supply and fixing of perforated type GI cable trays with necessarrt Anchor etc,.

75mm X 40 X 40 X 2 mm Thk

150mm X 40 X 40 X 2 mm Thk

Supply and fixing of following bare copper tapes GI tape / wires including all necessary fixing accessories and effecting connections as per specifications.

8 SWG GI wire

Commissioning the pool with super chlorine charging, suction sweeping, stabilizing the pH,and Maintaining the pool for 1 Month etc

Plant Room Operation and Maintenance including all consumables for one month from the date of handing over.

DIVING BOARD: Duraflex16' Maxiflex Model B (16-MX) Diving Board with Short Stand Anchor Fitting and Short Stand Bronze Anchor Set

Installation of Diving Board

Design, supplying, erecting testing and commissioning of - passenger lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional / international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc.,4 Stops (6 Person)

Supply of Starting Block Specially designed for competition events. Available with adjustable footrest to facilitate entry into the water. Its minimalist design in high quality materials gives it an elegant and modern look. Manufactured in AISI-316 stainless steel. Polished surface finish. Adjustable support (6 positions). Make : Astral / Certikin / Jandy

Supply of Anchoring Fixture. Make : Astral / Certikin / Jandy

Supply of Float lines supplied with floats and nylon rope, Roma model. Length:50m, Make : Astral / Certikin / Jandy

Supply of Float Line anchors made in S.S.-316, Make : Astral / Certikin / Jandy

Supply of Float Line Flange anchoring Socket made in S.S.-316, Make : Astral / Certikin / Jandy

Supply of Lane Hook. Stainless Steel AISI-304. Make : Astral / Certikin / Jandy

Supply of Float Line Roller Made of S.S.-304. Mounted on 4 rotating wheels for maximum mobility and transport. 1.8m width. Make : Astral / Certikin / Jandy

Supply of 'False start indicators comprise of 2 posts in S.S-316 Height : 1.8m. Make : Astral / Certikin / Jandy

Supply of False start floats includes polyester cord and float 25m. Make : Astral / Certikin / Jandy

Supply of Level anchor fixing in S.S.-316. Make : Astral / Certikin / Jandy

Supply of Backstroke turn indicators comprise of 4 posts in S.S-316. Make : Astral / Certikin / Jandy

Supply of Backstroke turn indicator bunting. 2 polyester cord and bunting 25 m. Make : Astral / Certikin / Jandy

Supply of Level anchor fixing in S.S.-316. Make : Astral / Certikin / Jandy

Supply of Life Buoys. made of Styropor covered with orange canvas, Ø 700 mm. Make : Astral / Certikin / Jandy

Supply of Lifebuoy hook made of AISI-316 stainless steel with connection to telescopic handles. Make : Astral / Certikin / Jandy

Supply of Reinforced telescopic pole, aluminium.10.0mts. Long. Make : Astral / Certikin / Jandy

LIFE GUARD CHAIR: Supply of Made in Stainless Steel AISI-304. With dismountable base plate. Steps, Platform, chair, including parasol holder made of polypropylene fibre-glass.Wheeled base for lifeguard chair. Make : Astral / Certikin / Jandy

Supply and installation, testing and commissioning of 58.5 KVA Water Cooled Diesel Generator set with AMF Panel as per Technical specifications.

KIRLOSKAR" Make diesel engine Model 6SL90ETA 4G2, Six Cylinders, liquid cooled, turbocharged with after cooler, developing 310 bhp @ 1500 RPM., electric start, compression ignition, 4 strokes, designed to run continuously at 1500 RPM confirming to IS 10002, ISO-3046, BS 5514 standard. Diesel Engine will comply with present CPCB IV + norms. The diesel engine will comprise of following with KG-1500 Control Panel

1. Dry type air cleaner 2. Exhaust Silencer suitable for canopy 3. Expansion bellow 4. Lube Oil cooler 5. Lube oil filter 6. Fuel Filters 7. Radiator with pusher type fan and mounting 8. In-line mono block fuel injection pump 9 Electronic governor and fuel feed pump 10. Flywheel with starter ring and bell housing suitable for close coupling 11. 24 Volt electric starter motor 12. Battery charging alternato 13. Microprocessor based KG745 Controller mounted on the Controller Panel, 14. Protection System for Low lube oil pressure , High water temperature

B) ALTERNATOR:- KIRLOSKAR GREEN" make 250 kVA Alternator, suitable for continuous operation rated at 1500 rpm 415 V, 0.8 PF, 50Hz, 3Ph. in SPDP enclosure, self- excited & self- regulated, Brush less, floor mounted with Ball or Bearings on end shields. The alternator conforms to IS: 4722, BS EN 60034-1& will be suitable for tropical condition C) BASE FRAME:-Suitable to couple above Engine & Alternator made from steel sheet metal. D) FUEL TANK:-600 litre capacity, with Inlet & Outlet arrangement, air vent & drain plug arrangement. E) BATTERIES:-24 Volts Battery with one set of connecting leads of 70sq mm Size Copper Cable. F) CANOPY DIMENSION IN (mm):-[L: 4750 W: 1700 H: 2005 ] (G) DG SET WEIGHT (Approx):-250KVA- 3990 Kg Dry Weight 4100 Wet weight,

Genset controller unit ‘KG - 745’ with totally enclosed, steel construction canopy in build control panel having following safeties and display parameters:

Engine Display parameters : 1) Oil Pressure, 2) Engine coolant Temperature, 3) Fuel Status, 4) Engine speed, 5) Engine run Hours , 6) Total starts, 7) Battery condition monitoring, Mechanical Safeties (along with Display)

1) Under/Over speed 2) Low Lube oil pressure 3) High engine coolant temperature 4) Charge Alternator fail 5) Start/Stop fail

Gen-set Display Parameters: 1) Phase/Line Voltage , 2) Line current, 3) Frequency 4) Average Voltage , 5) Average Current/Percentage of load , 6) Phase kW & Total kW, 7) KWH / PF, 8) KVA / KVA, 9) Earth fault Current,10)DG contactor Manual ON/OFF

Electrical Safeties (along with Display) 1) Genset Under/Over voltage, 2) Under/Over Battery voltage, 3) Under/Over frequency, 4) Phase Failure, 5) Phase sequence reverse, 6) Over Current, 7) Over kW, 8) High Earth Current, 9) Mains Monitoring,10)Mains contactor Manual ON/OFF

TECHNICAL SPECIFICATION OF KIRLOSKAR GREEN ACOUSTIC ENCLOSURE CONSTRUCTION: Following are some technical features of Acoustic Enclosure:- 1. The enclosure is modular in construction, 2. Base frame is made of Sheet metal, 3. Durable industrial locking system is provided on doors. 4.Doors are gasket with high quality EDPN material.

CORROSION RESISTANCE:- To make the enclosure weather proof: - 1. All sheet metal parts/components are hot dipped in seven tanks process, pretreated and passivated. 2. Sheet metal components are painted with P.P base power.3.Base frame is epoxy coated. 4. Zinc passivated hardware is used to avoid rusting

ACOUSTIC INSULATION:- 1. Sound proofing of the enclosure done with quality Foam confirming to IS: 8183. 2. Acoustic form shall be fire retarded and fire resistant. 3. Attenuates are provided to control sound at entry and exit to and from the container.4. Specially designed Residential Silencer is provided.

ELECTRICAL:- Neutral earth connecting point at termination block / neutral bus at control panel & Body earthing points at alternator leg and acoustic enclosure base frame.

SOUND LEVEL:- The Genset being offered comply to a sound level of < 75 dbA (12 point average) at a distance of 1-meter in free field conditions conforming to CPCB Norm

WARRANTY:-The warranty is for 24 months from commissioning or 5000 hours of operation whichever is earlier, subject to use

G V CONSTRUCTIONS (BID ID -1334337)

JAYAM ENGINEERING AND CONSTRUCTION (BID ID -1335124)