SITC of addressable board with allied work at main sewer city Div IV under Dy Ch E SO PMS City

32 Amp. 240V DP Switchfuse unit with CRCA sheet steel powder coated enclosure with rewirable fuses

100 Amp. 415V TP Switchfuse unit with CRCA sheet steel powder coated enclosure with rewirable fuses

100 /125A TPN with tinned copper bars of size 20 x 5 mm.

1.1 kV grade 2 Noss. (P+N) copper conductor flexible cable of area 4.0 sq mm and 1Nos. (E) 2.5 sq. mm copper cable for 30 /32 Amp. single phase switch.

3 Noss. single core Cu PVC insulated flexible cable of 50 Sq.mm. for phases & 1 single core Cu PVC insulated flexible cable for Neutral of 25 Sq.mm for 100/125 Amp. TPNSS switch.

3 Noss. single core Cu PVC insulated flexible cable of 50 Sq.mm. for phases & 1 single core Cu PVC insulated flexible cable for Neutral of 25 Sq.mm for 100/125 Amp. TPNSS switch

IP 42 Wall/column Mounted distribution board with one Nos of 16/32A 4P MCB and 6 Noss 16/32A DP MCB as outgoing (4 way TPN DB)

Supply and fixing 12 mm thick Marine Ply Plank

50 x 50 x 6 mm of M.S.angle.

1st category Al armoured cables FRLS outer sheathed- 2C x 4.0 Sq.mm

1st category Al armoured cables FRLS outer sheathed- 2C x 10 Sq.mm

1st category Al r armoured cables FRLS outer sheathed- 4C x 16 Sq.mm

Cable End Termination For Aluminium Cables – 2C x 2.5/4 Sq.mm

Cable End Termination For Aluminium Cables – 2C x 10 Sq.mm

Cable End Termination For Aluminium Cables – 4C x 16 Sq.mm

Submains FRLSH PVC conduit-2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire in 20mm Conduit

Submains FRLSH PVC conduit- 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20mm Conduit

Submains FRLSH Casing N Caping - 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire in 20 x 12 mm (1/2")

Submains FRLSH PVC conduit- 2 X 4 sq. mm + 1 X 4 sq. mm earth wire in 25mm Conduit.

Light /Fan / Ex. fan Points

2/3 Pin Independent Plug (IP)

15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch

5A/6A - 3/5 Pin Plug On Board

Ceiling fan of 1200 mm sweep with all accessories including Electronic Regulator for completing installation

Exhaust fan of 230mm sweep, 1400RPM, with 450 CFM free air delivery, AC 230V/415V , 50 Hz, single phase / three phase complete with all necessary accessories for completing installation .

Wall mounting air circulator of 450mm sweep, 230 Volts,AC 50 Hz, oscillating type complete with all necessary accessories for completing installation.

Fan safety rope/ Fan wire.

Fixing of Ceiling fans Above 0.5 Mtrs. to 1 Mtr.

Outdoor LED Street Light fittings – 70-90 W

LED Low Bay luminary – 210 W

LED Tubelight fixtures 1X 18W

SITC of IP67 flexible 24 V linear LED stripColor temperature (CCT)

Swan neck type bracket for fixing HPMV / HPSV lamp fixtures mounting on wall / shed etc. 0.5 to 1.2 Mtrs.

SMCJB - 1414, Hinged cover, Size 170 x 170 x 105mm

LED Bulkhead fitting

Excavating the trenches and refilling the same after the cable is laid in approved manner (Size of trench: 750 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 Cu. Mtr. = 2.2 RMT. And reinstatement.

Supply & Laying of double wall corrugated ( DWC) pipe 90 mm OD / 76 mm I.D.

Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25x3 GI strip/ / 2X8SWG G.I. wire up to chamber (wire or strip size as per fault level), disconnecting links with 600 x 600 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts. Bentonite/ Charcol & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope

Providing & Fixing signage made of 15 mm thick solid white acrylic laser cut out letters for height up to 39" etc complete.

Vinayl on both side covered with acrylic sheet

P/F Aluminium composite sheet of 3 mm thick either suspended or fixed bracketed on wall with U.V digital printing at suitable locn including all necessary framework completed as per detailed drawings to be issued during construction & as directed by the engineer.

Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.