Civil and Electrical Works in Classroom at NIA, Dwarka, New Delhi.

Grand Total 86,01,269.00

NAME OF WORK : Civil And Electrical Works in Classroom At NIA, Dwarka, New Delhi.

AS PER DSR AS PER MARKET RATE

DSR S.NO DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

A SUBHEAD A : Demolition & Civil work

A1 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable materials and disposal of unserviceable material

within 50 metres lead.

A2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete

and stacking within 50 metres lead : 15.12.2 Of area beyond 3 sq. metres

B SUBHEAD B : Civil Work

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V

level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to

6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) sqm 100 1,043.10 1,04,310.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at

every third course of half brick masonry.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth

level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm cum 37 6,326.05 2,34,063.85

Providing and laying Screed of cement Mortar ratio 1:1 of sufficient minimum thickness not exceeding 10 mm, to give a smooth& even

MR 1 B5 surface and curing etc. complete as per engineer incharge instructions. Cost should be inclusive of hacking the existing floor so that IPS SQM 370.00 373.6 138232

adhere to the existing floor.(Wooden & Carpet Flooring)

13.1.2 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) SQM 100 282.00 28,200.00

B7 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete.

Supplying and filling in plinth with sand under floors, including watering,

ramming, consolidating and dressing complete.

C SUBHEAD C : FLOORING

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the

11.26 C1 shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Digitally signed by AMIT

SINGH 11:18:52 IST

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than

11.41 C2 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4

coarse sand), including grouting the joints with white cement and matching pigments etc., complete

TILE 1-SKIRTING

Providing and laying Glazed vitrified tile skirting sizes (100mm) (thickness to be specified by the manufacturer) with water absorption

C4 less than 0.08% and conforming to IS: 15622, of approved make of Varmora Series Majestic shade Flame Ceillia laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white

11.47 cement and matching pigments etc.,

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting,

risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

C6 partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge

and finished smooth.

8.10.2 Granite Stone of approved shade SQM 30 3,542.85 1,06,285.50

TOTAL Subhead B Flooring 12,17,378.00 0

SUBHEAD D: CEILING

GYPSUM BOARD CEILING

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25

mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at

the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26

mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel

D1 with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm

thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at

450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered

and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board

12.45.1 conforming to IS: 2095- (Part I) : 2011 (Board with BIS SQM 200 1,145.95 2,29,190.00

certification marks)

Mineral Fibre Ceiling

Digitally signed by AMIT

SINGH 11:18:52 IST

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles

should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance

as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33

mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200

mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from

D2 ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully

threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along

main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of

0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws.

The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all

heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

With 20 mm thick beveled tegular mineral fibre false

ceiling tile (NRC 0.7)

TOTAL Subhead D Ceiling 10,55,925.00 0

E1 G.I. SECTIONS FOR WALL PANELING

GYPSUM BOARD Partition

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work

made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and

ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm

centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs

and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor

and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both

9.105 ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to

E4 centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing

of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing

channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to

the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per

manufacture's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095:

(part I): 2011 (Board with BIS certification marks)

Total Subhead E 1,53,000.00 0

F SUBHEAD F: Partition Finish 1

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on

F1 wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately).

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density

9.127 protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

Digitally signed by AMIT

SINGH 11:18:52 IST

Total Subhead F 1,84,860.00 0

G SUBHEAD G: Partition Finish 2

G1 Providing and fixing 6mm bewelled edge Mirror of required size with hard wood frame and necessary SS screw fixed with 6mm ply all

complete as per directions of Engineer-in-charge

Total Subhead G - 10250.8

H SUBHEAD H: Paints and Polish

ACRYLIC EMULSION PAINT

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand

and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

13.85 H2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre SQM 470.00 64.45 30,291.50

Total Subhead H 84,095.76 0

I SUBHEAD I: Finishing Material

Supplying of designer wallpaper as per approved samples contains 10% recycled content, Nonwoven/acrylic fabric total weight 8-15

MR3 oz/sqryard, thickness- .02 inches, meets section 01350 IAQ test requirements. water based, ready to use and works with a variety of sqm 60.00 2659 159540

substrates, have microbial prperties and zero VOC

MR4 I2 Various Direction signages of exit and washroom identification with LED glow panel and proper fixture for installation and connection

MR5 Providing making and fixing in position custom made SS siganges of sizes 16"x5"as per Architectural drawings and instruction with

approved SS fixtures, approved base including necessary hardware, substructure extra complete as per detail drawing, of size 16"x5"as ITEM 5.00 2350.1 11750.5

specified and directed by Engineer in charge

Total Subhead I - 216169.78

I SUBHEAD J: Doors

MR Fire metal door of 2 m wide, of 120 min fire rating no. 7 105357 737499

1) Hinges: Doors are provided with Stainless Steel 304 double ball bearing hinges Fire rated and “CE” marked. Size 103x76x3mm. Philip

cross head s.s. screw 6 mm diameter are provided to assemble door leaf and door frames.

2) Mortice Dead Lock: Doors are provided with Mortice dead lock with 70 mm cylinder for locking of door. Cylinder may have thumb turn

operation from inside of door. Lever handle in mortice lock is optional.

3) Door Handle: Doors are provided with S.S. H type handles made from S.S.304, 200mm long and 19 mm O.D. Handles are back to back

glass door handles.

4) Door Closer: Doors are provided with fire resistant hydraulic door closer. Having capacity 80-90 kg weight of door leaf.

5) Door Stopper: Doors are provided with S.S. Door stopper with two point rubber balls at bottom

Digitally signed by AMIT

SINGH 11:18:52 IST

• Honeycomb/Rockwool/Mineral wool core in-fill for structurally flat surface

• Shutter thickness of 0.046m

• Fire rating of 120 minutes for stability and integrity (IS/ BS)

• UL labelled doors for 90 minutes

• Clear vision lite up to 120 minutes fire rating

• No welding joints and sharp edges, interlocking at the stiles

• Factory prepped to receive all Mortise hardware specified

• High aesthetics and robust structure

• Fully flush constructions

• Easy flush constructions

• Easy to install on a flush wall opening and dry wall partitions

• Can be supplied in a wide range of colours

Material 5mm thick clear/wired glass Circular or Rectangular Rectangular Dimension 0.3m X 0.3m Coating The door frames and door

shutter are primed with Zinc-Phosphate Stoving Primer and finished with Polyurethane Aliphatic grade of epoxy paint as required

Powder Coating Material Epoxy Polyester / Pure Polyester / Polyurethane Powder Coating Thickness 60-65 Microns (Dry film Thickness)

Doors are tested at CRBI (Central Building Research Institute) and ARAI (Automotive Research Association of India. A research institution

of the automotive industry with the Ministry of Heavy Industries and Public Enterprises, Government of India). Fire doors are tested as

per IS 3614 Part 2 and BS 476 part 20 and 22

Material -5mm thick clear/wired glass Circular or Rectangular Rectangular Dimension 0.3m X 0.3m, Coating -The door frames and door

Vision shutter are primed with Zinc-Phosphate Stoving Primer and finished with Polyurethane Aliphatic grade of epoxy paint as required,

Glass Powder Coating Material- Epoxy Polyester / Pure Polyester / Polyurethane Powder Coating ,Thickness- 60-65 Microns (Dry film

Digitally signed by AMIT

SINGH 11:18:52 IST

NAME OF WORK : Civil And Electrical Works in Classroom At NIA, Dwarka, New Delhi.

DSR' 2018 NON SCHEDULE

Sl. No. DSR Reference Description of works Unit Quantity

Rate Amount Rate Amount

CHAPTER - 1 : INTERNAL ELECTRIFICATION

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2.5 sq.mm FRLSH PVC

1.10 insulated copper conductor single core cable in surface / recessed GI conduit, with modular

1.10.3 switch, modular plate, suitable GI box and earthing the point with 2.5 sq.mm FRLSH PVC

insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (

without independent switch etc.) with 2.5 sq. mm FRLSH PVC insulated copper conductor single

IE-2 core cable in surface/ recessed GI conduit, and earthing the point with 2.5 sq. mm FRLSH PVC Point 12 858.00 10,296.00 -

insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 2.5 sq.mm FRLSH PVC insulated copper conductor single

core cable in surface / recessed medium class GI conduit, 2 way modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm FRLSH PVC insulated copper conductor

single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

IE-4 1.31 recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular Each. 6 477.00 2,862.00 -

switch, connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSH PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class GI conduit as

1.14.2 required.

a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSH PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class GI conduit as

1.14.9 required.

a) 4 X 6 sq.mm + 2 X 6 sq.mm earth wire

Supplying and fixing following One distruibution board ( DB) unit consistoing of two

compartments with respective incoming 4 pole MCCBs ,DP MCB ELCBs set of contactors and out

going SP MCBs Having ON indications For Incoming Feeder Status e.g DB-1 is combination of DB

1/N ,DB 1/U connected to incoming supplies from normal and UPS respectively including a set of

time switches as per specs and as shown on Drawing and as under (Light DBs)

Normal supply compartment 0 -

1.no. 63 A 4P MCCB 0 -

Digitally signed by AMIT

SINGH 11:18:52 IST

DSR' 2018 NON SCHEDULE

Sl. No. DSR Reference Description of works Unit Quantity

Rate Amount Rate Amount

1 set of R,Y,B ON indicating Lamps for Each 0 -

Outgoings 0 -

24 Nos 10/20 Amp SP MCB arranged in 3 rows and each row controled by one nos-40 Amp DP

MCB & 40 amp DP, 100mA ELCB with one No.Astronomic digital Timer etc complete.

6 nos 10/20 Ampr SP MCB arranged in existing three rows ( non timer controled feeders ) 0 -

UPS Suply compartment 0 -

1 no. 40 amp DP MCB ELCB 0 -

1 set of ON indicating Lamps for Each 0 -

outgoings 0 -

8 nos 10 Amp lighting circuit shell be controlled by 32 Amp DP contractor with one Astronomic

digital Timer etc complete.

2 nos 10 Ampr SP MCB arranged in existing three rows ( non timer controled feeders ) 0 -

(b) MR2 LED Ceiling Light Fixture Recessed Type 120 Lumen/watt Each 94 - 3776 3,54,944.00

(c) MR3 LED Ceiling Light Fixture Surface Type Each 10 - 2934 29,340.00

Supplying, installation, testing & Commissioning of LED strip lights ( in suitable lengths as per

requirement) of 10 watt/mtr , system efficiancy minmum 80 lumen/watt , colour temperature

3000K,necessary electronic control gear sets including making connections, testing

commissioning etc as required.

Supply, Installation & testing of 400mm wall bracket fan suitable for use on single phase, 230

volt, 50Hz AC supply complete with all accessories as required

MR6 Supply, of 400mm pedestal fan suitable for use on single phase, 230 volt, 50Hz AC supply Each. 2 - 3,266.00 6,532.00

complete with all accessories as required

Supply, Installation & testing of following 900 RPM Exhaust fan non metalic UL listed suitable for

single phase 230/240V, AC Supply complete with motor louvers , mounting brackets, all

accessories etc complete as required.

1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. Each. 0 99.00 - -

0 Total carried over to summary 0 4,18,552.00 9,30,340.00

CHAPTER - 2 : POWER WIRING 0 -

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

PW-1 1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A Each 12 586.00 7,032.00 -

modular switch, connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSH PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class GI conduit as

1.14.3 required.

a) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Digitally signed by AMIT

SINGH 11:18:52 IST

DSR' 2018 NON SCHEDULE

Sl. No. DSR Reference Description of works Unit Quantity

Rate Amount Rate Amount

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSH PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class GI conduit as

1.14.8 required.

a) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class GI conduit as

1.14.10 required.

a) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Total carried over to summary 0 2,64,162.00 -

CHAPTER -4: SHOP ELECTRICALS 0

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSH PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class GI conduit as

1.14.4 required.

a) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Total carried over to summary 0 10,975.00 -

CHAPTER -5 : TELEPHONE / TV / LAN CONDUITING 0

Supplying and fixing of following sizes of medium class GI conduit along with accessories in

1.21 surface/recess including cutting the wall and making good the same in case of recessed conduit

1.21.2 as required. (for Telephones, TV and Data)

Supplying and fixing of following sizes of medium class GI conduit along with accessories in

1.21 surface/recess including cutting the wall and making good the same in case of recessed conduit

1.21.3 as required. (for Telephones, TV and Data)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

TW-3 including connections but excluding modular plate etc. as required. Each 7 148.00 1,036.00 -

a) Telephone socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

TW-4 including connections but excluding modular plate etc. as required. Each 0 148.00 - -

a) TV antenna socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

TW-5 modular switches in recess etc. as required. Each 7 298.00 2,086.00 -

a) 1 or 2 Module (75 mmX75 mm)

Supply and fixing of Data outlet (RJ45) with anodised GI box with front plate etc. complete as

Supplying and drawing following pair 0.5 mm dia FRLSH PVC insulated annealed copper

1.18 conductor, unarmored telephone cable in the existing surface/ recessed steel/ GI conduit as

1.18.2 required.

Digitally signed by AMIT

SINGH 11:18:52 IST

DSR' 2018 NON SCHEDULE

Sl. No. DSR Reference Description of works Unit Quantity

Rate Amount Rate Amount

Supplying and drawing following pair 0.5 mm dia FRLSH PVC insulated annealed copper

conductor, unarmored telephone cable in the existing surface/ recessed steel/ GI conduit as

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,

TW-9 1.19 shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ Metre 25 47.00 1,175.00 -

recessed steel/ GI conduit as required.

Supply and installation of following size Krone connectors in MS box complete as required.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

TW-11 a) 80 mm dia nominal bore Metre 10 919.10 9,191.00 -

0 Total carried over to summary 0 62,738.00 27,298.00

CHAPTER -6: EARTHING 0

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

SE-1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of Set 4 13,838.00 55,352.00 -

2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe FRLSH earth electrode

SE-3 5.11 including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. Each 40 706.00 28,240.00 -

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Total carried over to summary 0 3,58,252.00 -

CHAPTER -9: EXTERNAL POWER SUPPLY 0 -

Supplying of XLPE insulated, PVC sheathed 1.1 KV grade aluminium conductor armoured power

EX-1 cable as per IS : 7098 of following sizes: 0 - -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size direct in ground including excavation, sand cushioning, protective covering and

refilling the trench etc as required.

(b) 7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 10 405.00 4,050.00 -

(c) 7.1.4 Above 185 sq. mm and upto 400 sq. mm Metre 50 474.00 23,700.00 -

Digitally signed by AMIT

SINGH 11:18:52 IST

DSR' 2018 NON SCHEDULE

Sl. No. DSR Reference Description of works Unit Quantity

Rate Amount Rate Amount

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size in the existing RCC/ HUME/ METAL pipe as required.

(b) 7.5.2 Above 35 sq. mm and upto 95 sq. mm Metre 10 57.00 570.00 -

(c) 7.5.4 Above 185 sq. mm and upto 400 sq. mm Metre 25 134.00 3,350.00 -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV

grade of following size on cable tray as required.

(a) 7.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 150 45.00 6,750.00 -

(b) 7.8.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) Metre 140 92.00 12,880.00 -

(c) 7.8.4 Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) Metre 120 185.00 22,200.00 -

Supplying and making end termination with brass compression gland and aluminium lugs for

EX-5 9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV 0 -

grade as required.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

(Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

EX-6 convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders Metre 50 604.00 30,200.00 -

including G.I. bolts & nuts, etc. as required.

a) 150 mm width X 50 mm depth X 1.6 mm thickness

Total carried over to summary 0 1,26,766.00 3,77,955.00

SUB-HEAD (A) : FIRE DETECTION SYSTEM

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch

DSR--17.2.3 screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling

speaker complete as required.

Digitally signed by AMIT

SINGH 11:18:52 IST

DSR' 2018 NON SCHEDULE

Sl. No. DSR Reference Description of works Unit Quantity

Rate Amount Rate Amount

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with

rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of intelligent addressable duct detector including

suitable Photo detector complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

DSR--17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as Mtr 500 173.00 86,500.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

DSR--17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including connections -

and interconnections etc. as required.

DSR--17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm Mtr 400 54.00 21,600.00

Supplying and fixing 25 mm dia GI flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Supplying and fixing of 20 mm GI conduit along with accessories in surface/recess including

MR15 painting in case of surface conduit, or cutting the wall and making good the same in case of Mtr 200 138.00 27,600.00

recessed conduit as required.

All A.C. Units shall be integrated with fire panel so that in case of fire signal, all the units shall be

Total of All HEADS 0 17,07,593.00 13,63,193.00

Digitally signed by AMIT

SINGH 11:18:52 IST