Construction of additional accommodation for INDUSCOS Wing Kashmir Haat Srinagar

Amount

Providing and fixing of ceiling joists 3”x4” made of budloo wood including cost of nails complete. 23x3”x4”x46’-0”=88.16 cft 19x3”x4”x38’-0”=60.16 cft Total =148.32 cft

Providing and fixing of 12mm thick ply board in ceiling of approved brand including cost of necessary fittings complete 1x46’x38’ = 1748.00 Sft or 162.45 Sqm

Providing and fixing of 12mm thick Nordic pine wall paneling (T&G) fully finished and four sides planned, fungus and termite proof (seasoned moisture context 8% to 15% imported type ISO:14001 approved including 12mm thick ply wood, frame work of budloo wood (2”x1 ½”)and two coats of melamine polish and head less nails and inclusive all carriages all taxes of allied material involved complete.

Providing and applying of 15mm thick cement sand plaster in 1:6 mix 1x46-0”x39’-0”=1794.00 sft 1x13’-0”x8’-0”=104.00 sft 2x3x39-0”x8’-8”=2026.44 sft 2x2x40’-6”x8’-8”=1402.92 sft 2x1x12’-0”x8’-8”=207.84 sft 2x2x13’-0”x8’-8”=450.32 sft 2x1x8’-4”x8’-8”=144.13 sft Total =6129.21 sft ----------(A) D/D 2x5x6’-0”x4’-0”=240.00 sft 2x1x3’-0”x3’-0”=18.00 sft 2x3x6’-0”x3’-0”=108.00 sft Total =366.00 sft ----------(B) Total (A-B)=5763.21 sft or 535.61 sqm

Providing and laying in position cement concrete flooring (50mm thick) using 20mm Normal Size stone aggregate. 1x18’-0”x38’-0”=684.00 sft 2x18’-0”x12’-0”=432.00 sft 1x6’-0”x38’-0”=228.00 sft Total =1344.00 sft or 124.90sqm

Providing and fixing 1st quality vitrified tiles in floor & sg wall kirting etc 8mm thick over 12mm thick bed of cement mortar (1:3) & joists with grey cement slurry & 3.3kg/per sqm including pointing complete (600x600mm) 1x18’-0”x38’-0”=684.00 sft 2x18’-0”x12’-0”=432.00 sft 1x6’-0”x38’-0”=228.00 sft Total =1344.00 sft ------(A) 1x11’-6”x6’-6”=74.75 sft ----(B) Total =A+B= 131.81 Sqm

Providing and applying of water proof weather coat of excel paint/washable of approved brand complete job Same qty vide item No.----i.e 535.61 sqm--------(A) D/D 31.08 sqm --------(B) Total qty (A-B)=500.50sqm

Providing and applying painting with synthetic emulsion paint with two or more coats on new work including priming coat complete job Total qty =68.00 sqm

Providing and fixing of wooden shutters 35mm thick including cost of hings made of 1st class kail wood & all hardware accessories complete job including 3.5mm thick glass with beadings 5x2x1’-6”x4’-0”=60.00 sft 5x1x3’-0”x4’-0”=60.00 sft 2x1x1’-6”x3’-0”=9.00 sft Total =129.00 sft

Providing and fixing of 35mm thick door shutters including cost of both side laminated board in first class imported kail wood. 4x6’-0”x3’-0”=72.00 sft

Structural steel work in trusses welded in built up section, framed work including purlins , gusset plates base plates holding down bolts etc including cutting, hoisting, fixing in position with applying priming coat of approved steel primer all complete. 46’-6”x39’-6”=1836.75 sft @3.0kg/sft =6428.62 kg

P/F track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalume steel. The sheets shall have wide panes with 3 No. stiffing ribs, effective water shedding and special male/female ends with fuil return legs on side lapps for purlins support and anti capillary flute inside lapp. The sheets shall have a hot dip metallic coated of zinc and alumunium (150 gms/sm) zinc/alumunium coating mass total on both side AZ-150 as IS-1397,550 PMA,yeild stress.Providing silicon modified ployester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area).50mm. 2x25’-4”x39’-6”=2001.07sft or 185.97 sqm

Providing and fixing of T&G ceiling for soffits including cost of budloo wood frame work complete job 2x1x2’-0”x39’-0”=156.00 sft

Providing and fixing of eaves boarding 32x300mm made of budloo wood including cost of nails complete job 1x2x39’-0”=78.00 rft

Wiring for the following light points and exhaust fan points with 1.5 sqmm PVC insulated copper wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 amp single pole switch of approved quality in modular grid plate and GI box and earthing of fixtures and the outlet box with 1.5 sqmm PVC insulated copper wire (make Havells, anchor, GM or equilvant approved by the site Engineer). a)One light controlled by 6 amp switch.

Wiring for 240 volt single phase and neutral 16 amp switched socket outlet with 4 sqmm PVC insulated copper wire in concealed or surface mounted PVC conduit including providing and fixing of 16 amp 3 pin switched socket of approved make with modular grid plate and earthing the third pin of socket outlet with 1.5 sqmm PVC insulated copper wire complete as required (make Havells, anchor, GM or equivalent approved by site engineer).

Wiring for ceiling fan/wall fan point same as above in item No. 1 but controlled by electronic stepped regulator and 6 amp control switch, (make Havells, anchor, GM or equivalent approved by site engineer).

Wiring for 230v ac, 5 pin 6 amp socket outlets for light duty power with 2x1.5sqmm PVC insulated copper wire of approved make with modular grid plates and earthing the third pin of socket outlet with 1.5 sqmm PVC insulated copper wire complete as required (make Havells, anchor, GM or equivalent approved by site engineer).

Wiring for circuits for light/fan/exhaust fans/Ac’s etc with following size PVC insulated 1100v grade multi strand copper conductor wire, green insulated multi stand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken 2 switch board and then distrusted further. (make Havells, anchor, Polycabe or equivalent approved by site engineer). (without conduits). a)2x2.5 sqmm +1x1.5 sqmm

Supplying and fixing of following size dia PVC conduit including cost of junction boxes bends elbows sockets tees etc laying in slab cutting, chases and making good or surface mounted including all fixing hardware as required. a)25mm dia

Supplying, Installation, testing and commissioning of pre wire 12 watt LED light complete with connection as required (make havells, anchor, GM, halonex or equivalent approved by site engineer).

Supplying, Installation, testing and commissioning of ceiling fan compete with connection as required. (make havells, halonex, Bajaj or equivalent approved by site engineer).

Supplying and fixing 12 way DB box complete as required.

Supplying and fixing of following size MCB’s complete with connection as required (make Schneider, anchor, Legrand, ABB, or equivalent approved by site engineer). a)6-32 amp (SP)

b)63 amp (DP)

Providing and commissioning of chemical earthing with GI pipe complete as required.

Supplying and laying of 7/16 64 gauge copper wire for service line complete with connection as required.

M/S NADEEM FIRDOUS

Alamdar furniture works

JP Enterprises