Repairs to various Autoclave Machines and ETO Sterilizer Machine installed at CSSD Section of Govt. SMHS Hospital, Srinagar.

Amount

Natsteel Make

Complete servicing of the autoclave by way of descaling of hot water generator by circulating solution of descaling compound sulphamic acid powder and water through it continuously for 24hrs with the help of pump while maintaining a PH 1-2. The solution is to be circulated from tank/ barrel/tray. The job also includes opening/cleaning of drain steam valve, opening and cleaning of safety valves and pressure adjustment of same. All tools and tackles, consumables are to be arranged by the firm. Dismounting all pipes along with mountings, opening valves etc and cleaning of the same with water and cloth. The job further includes refitting of all pipes and mountings by way of providing suitable teflon taping and gaskets to prevent any leakage and successfully testing of same.

Disconnection of all incoming and outgoing electrical connections to the electrical control panel of the machine. Providing and fitting with complete replacement of following items into electrical panel of the machine and testing the machine at set operating parameters. The job includes replacement of following items: 1) Push Button 2) Voltmeter 3) Ammeter 4) Relay Module Switch (4) Nos.) IEC255 5A 4) Main Relay Module switch

Providing and fitting of 6KW capacity heating elements for boiler of automatic Autoclave installed at CSSD section by way of dismounting the old damaged heating elements after disconnecting the electrical connections. The job includes replacing the same with new one of same specifications followed by testing on full load for satisfactory performance.

Replacement of the solenoid coil feeding vaccum and steam system of the Natsteel make Autoclave by way of fault tracing by highly skilled techanician. The job further includes dismounting of the damaged solenoid coil of same capacity and specification.

Amisco eagle 3053 make

Providing and Fitting of Silicon door gasket for door by way of dismantling of old damaged gasket from the door. The job includes replacing the same with new one of same specifications followed by testing on full load for satisfactory performance.

Complete rewinding,testing and commissioning of 3 phase ,440V,50 Hz, 1400 rpm "electric motors of capacity 1 Hp including rotor testing etc. complete in all respects. The job encompasses dismantling of 1HP motor assembly and shifting of burnt motor to workshop for rewinding and latter on shifting of rewinded motor back to site. The job includes straightening of the slots,removing of any burrs within the slots of stator. The job then includes assembling the pump motor assembly back. The job latter includes testing the same on full load.(old part to be retained by firm and rate quoted must be less by value of scrap).

Dismounting of the existing damaged contactor 3 Pole 110 Amp from the main panel of the Amisco make Autoclave by way of disconnecting the electrical supply .The job includes relacement of the same with new one. The job further includes testing of the same on load.

ETO Sterilizer machine

Providing and Fitting of door lock by way of dismantling of old damaged door lock. The job includes replacing the same with new one of same specifications followed by testing on full load for satisfactory performance.

M/S SAIFCO ELECTRICAL/ ELECTRONICS MECHANICAL ENGINEERS

NIGHTINGALE TRADING ENTERPRISES

M/s Mubel Constructions