REPAIR REPLACEMENT OF FENCING INCLUDING POST ENTRANCE GATE, COMPOUND WALL, RCC JALI AND ALLIED MISC WORK FOR MD/OTM ACCN AND ROOF TREATMENT, SUNKEN POSTION, FLOORING WALL TILLING AND SANITARY FITTING AT MD ACCN AND CERTRAL AMENITIES IN AOR OF AGE B//

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of andy description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolation of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of concrete in ground floors and pavings exc 15 cm thickness but above ground floors removing the debris to the out side of MD land complete all as specified and directed.

Demolation of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed.

Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

Taking up or down GI tubing 20 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

Dismantling PVC (SWR) pipe of any description complete all as specified and directed.

Demolition or breaking up drain pipes 450mm dia (salt glazed ware AC or reinforced concrete ) set in cement mortar including breaking and removal of bedding and hunching complete of following bore pipes complete all as specified and directed.

Taking down cement plaster/cement mud plaster on brick walls etc, incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section embeded in natural ground including taking out embedded portion and making good to disturbed ground complete all as specified and directed.

Dismantling old unserviceable barbed wire fixed in any type of post complete all as specified and directed

Dismantling old unserviceable concertina coil fencing fixed with any type of post by any means complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided,complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in Soft/Loose Soil, complete all as specified and as directed.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for cement concrete 1:3:6 type C-1 , (Using 20 mm graded stone aggregate) as in foundation filling and sunken floors etc complete all as specified and directed.

Material and labour for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate ) as in drain channel, copings, flooring, sub base, etc complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type B1 (using 20mm gradrd stone agg ) as in Column filling complete all as specified and directed.

Material and labour for pre cast RCC cover slab 1:2:4 type B-1, (Using 20 mm graded crushed stone aggregate ) as in manhole cover slab etc., and set in cement mortar 1:4 including necessary form work complete all as specified and as directed

Material and labour extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed.

Material and labour extra for forming fair finished drain or channel exc 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed.

Supply only approved liquid water proofing compound.

Material and labour for Brick work with sub class 'B' old size built in CM 1 : 4, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Material and labour 16-18 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complte all as specified and directed.

Material and labour for 16-18 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 10mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complte all as specified and directed.

Material and labour for Formwork to sides of column incl rough finished surfaces of concrete complte all as specified and directed.

Supply and fix in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed.

Supply and fix in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.

Supply and fix Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

Material and labour for repair to aluminium door or window not exceeding 3.0 Sqm including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, pintle hings complete all as specified and directed.

Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed.

Material and labour for Mild steel TMT bar of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Supply and fix of mild steel as in Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar workconforming to Fe.290.Gde-E-165 fixed with angle cleats or other conne cting plates complete all as specified and directed.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Supply and fix 600 mm dia razor concertina coil fencing with and including required clips, pins etc as per specification fixed on the Y angle each concertina coil shall be fixed to MS angle with existing rows of barbed wire, on each of Y angle. There shall be 38 circles in each 6 mtr length, no of clips in each 9m-200 nos, central core wire 12 SWG hot galvanized height stenciled wire: UTS-145-160 Kg/Sq mm, Razor strip - 0.5mm thick hot dipped galvanized and length 19mm: clips 1.5mm thick made of SS AISI 410 all complete one all as specified annd as directed. Note:- (i) payment shall be made on length of security wall/fencing & not actual length of concertina coil. (ii) 'Y" angles shall be measured and paid seperately.

Supply and fix MS Channel,angle,plate or tee section cut to length including welding and bending angles as necessary as specified in shape and fabricated Fe-290 (Gde E-165) complete all as specified and directed.

Supply and fix Mild steel Flat iron 40x6 mm as in posts as in fillets for securing wire mesh etc. including all necessary drilling, bolting or riveting, etc and smilar work conforming to Fe 290(Gde E-165) complete all as specified and directed.

Fixing only chain link fencing and including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc. Including provision binding wire complete all specified and as directed.

Supply only chain link MS galvanized fencing of mesh size 75mm X 75mm X 3.15 mm dia of wire conforming to IS 2721 and complete all as specified complete all as specified and as directed.

Supply only chain link MS galvanized fencing of mesh size 100mm X 100mm X 3.15 mm dia of wire conforming to IS 2721 and complete all as specified complete all as specified and as directed.

Material and labour for round bar 10mm dia & over conforming to FE 290 (Gde-e-165) cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips cut to length bend to shape complete all as specified and as directed.

Supply and fix for 11 to 15 mm dia Mild steel, screw bold (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nuts n exc 5cm long complete all as specified and as directed.

Supply and fix Welded mild steel wire fabric n.exc 4 kg pefr sqm supplied and fixed complete to wood or steel members complete all as specified and as directed.

Material and labour for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely)

Material and labour for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish not exceeding 100 mtr distance from starting point. (ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 mixed with water ptoofing compound @ 3% of weight of cement or as per manufactures instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above over by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm.

Material and labour for coloured non skid cermic tiles 6 to 7mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for coloured non skid cermic tiles 6 to 7mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, as in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for glazed coloured ceramic tiles of size 450 x300x7 mm thick on vertical surfaces set, jointed and pointed in net cement slurry and pointed in white cement mixed with colour pigments to match the existing surface over 10mm thick screed in CM 1:4 complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade fixed with grey cement and pigment complete all as specified and directed.

Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

Material and labour for endura tiles 30cm x 30cm x 10mm thick, anti resistance,of any colour set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screed bed in cement mortor 1:6 complete, complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4,type B-0, (Using12.5 mm graded stone aggregate )as in roof padding finishing cement concrete complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4,type B-1, (Using20 mm graded stone aggregate) as in flooring finishing cement concrete complete all as specified and directed.

Material and labour for 100 mm thick 1:4:8 PCC type D-2 (using 40mm graded stone aggregate) in sub base flooring etc complete all as specified and directed.

Material and labour for 100mm thick 1:2:4 PCC type B1 (using 20mm graded stone aggregate) as.in floor finishing even and smooth with out using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfces finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement with using WPC @200ml/50 kg by the wt of cement. WPC shall be measured and paid seperately.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of brick/concrete surfces as in ceiling finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls and applying two coats of acrylic distemper over a coat of primer over 1 mm thick wall care putty complete all as specified and as directed.

Material and labour for preparation of new surfaces of wall complete removal by washing, rubbing down dirty surface during fixing of aluminium windows etc andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gMaterial and labouritre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying three coats of white wash including preparation complete all as specified and as directed.

Material and labour for preparation and cleaning of old exterior cement/concrete floor surfaces & applying one coat weather coat floor paint as per approved make and colour complete all as specified and directed.

Material and labour for preparation of old surfaces of wall and applying two coast of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paints over a coat of primer to new surfaces of any description exc 10 cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paints over a coat of primer to new surfaces of any description n exc 10 cm width or girth complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

Supply and fix GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete all as specified and directed.

Refixing old serviceable steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed.

Supply and fix 20 mm bore galvanised iron tubing medium grade including all fittings in walls/ceilings or laid in floors including cutting complete all as specified and directed.

Refixing old serviceable steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed.

Supply hoisting and fix 500 ltrs rotational moulded polythene water storage water tanks twin layered construction ( cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valve all as specified in SSR Part I duly ISI Marked, including dismantling the existing tank complete all as specified.

Supply hoisting and fix 1000 ltrs rotational moulded polythene water storage water tanks twin layered construction ( cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valve all as specified in SSR Part I duly ISI Marked, including dismantling the existing tank complete all as specified.

Supply and fix in repair chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

Supply and fix in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair stop valves/angle cocks, cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and directed.

Supply and fix in repair stop valves or two way angle cocks, cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complte all as specified and directed.

Supply and fix in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed.

Supply and fix in repair 20 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.

Supply and fix in repairs, equilibrium float valve in low level cistern of any make complete all as specified and as directed.

Supply and fix in repair PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

Supply and fix in repair PTMT waste coupling of 40 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

Supply and fix in repair stainless steel grating with hole 100 mm dia fix with cement all as specified and as directed

Supply and fix in repair 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

Supply and fix in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer complete all as specified and directed.

Supply and fix in repair EWC anti microbial seat cover hygenic type for padestral pattern complete all as specified and directed.

Supply and fix in repair 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15mm bore iron pipe complete all as specified and directed.

Supply and fix in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed.

Supply and fix in repairs 10 Litres, PVC valveless syphonic action type, flushing Cistern, low level, white inlet, ball valve, float, and brackets inclluding 32mm PVC flush pipe suitable for flushing cistern complete all as specified and directed.

Supply and fix in repair round moulded PVC water tank lid (Cover) for specially 500 Ltrs, 1000 Ltrs complete all as specified and directed.

Supply and fix in repair glass shelf size 500 x125 mm with chromium plated guard complete all as specified and directed.

Supply and fix in repairs 32/40mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

Supply and fix in repairs aluminium door seal complete all as specified and directed.

Supply and fix stainless steel 304 sink with drainage board made of 1mm thick stainless steel sheet for kitchen with plugs, washers, waste coupling and pipe, cast iron cantilever brackets and connecting union to pipe overall size 940 mm x 460 mm bowl size 405mm x 354mm x 203mm complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.

Supply and fix in repairs vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including barckets complete all as specified and directed.

Supply and fixin repair 150 mm dia PVC (SWR) pipes, having , single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

Supply and fix 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed

Supply and fix 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed

Supply and fix 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed

Supply and fix 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed

Supply and fix reinforced concrete pipes, class NP2, laid and jointed complete with collars 450mm dia complete all as specified and directed

Material and labour for concrete bed in cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) for drain pipes, 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Supply and fix in repair health faucet ABS with 1.2 m SS flexible tube and ABS wall hook fixed with necessary fixers complete all as specified and as directed.

Supply and fix in repairs, internal brass fitting ( phase) for 15mm bore bib tap/pillar tap/ wall mixture of any make, complete all as specified and as directed.

Forming Construction joint 100mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Please Enable Macros to View BoQ information