REPAIR / MAINT OF PERIMETER LIGHTS, HIGH MAST LIGHT, SECURITY LIGHTS AND MISC E/M WORKS AT TECH AREA AND VSV, MES COLONY AT BRD (AF) UNDER GE (AF) TUGHLAKABAD

Amount

S&F in replacement TIRANGA LED rope light IP 65 ingress protection (18mtr) input power 10 watt/meter PF> 0.95 width of strip 8mm no. of LED 120 having 6 meters of each orange white and green inside silicon tube complete mounting on GI pole of any type including driver and making connection complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of smart security light fitting of 120 Watt with Motion sensor-based dimming, cool white, luminous Efficacy 110 Lm/W, IP 66, with surge protection complete all as specified and as directed by Engr-in-Charge.

INCOMING SUPPLY :- (i) MCCB 315 Amp ,4 Pole 50 KA , 415 V(ICS=ICU=ICW for 1 Sec), thermal Magnetic Release (Manual Draw out Type ) of capacity 315 Amps Type of Operation : Electrical by 230 V ACX Motor and Manual Handle OUTGOING SUPPLY :- (i) MCCB 125 Amps 36 KA ,4 Pole with Fixed thermal & magnetic release 415 volts , 50Hz,=05 Nos Note : Panel layout shall be approved by the accepting officer before fabrication.

S&F in repair for 200W LED flood light, Matt black polyester powder coated with secondary lens optics with LED make luminated having luminaire efficacy of 130 lm/W. Total of 26,000 Lums +/- 10%. Provided with built in surge protection 5kv and external surge protection of 10kv, having Ingress protection IP 66 complete all as specified and directed.

Supply only LED driver suitable for LED street light/flood light fitting as per site requirement of capacity up to 110 watt, complete all as specified and directed.

Supply only LED driver suitable for LED street light/flood light fitting as per site requirement of capacity 120 to 150 watt watt, complete all as specified and directed.

M&L for repair of gear assembly double drum winch type with pully and stainless steel wire rope to operate the symmetrically fitted lamps complete system of high mast light upto 16 mtr height and made it functional upto the entire satisfaction. Note : Cost of spare parts changed deemed to be included in the quoted rate.

Supply and fixing in replacement energy saving LED Street light of 110 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, minimum 110 lumen/watt cool/warm as per site requirement, operating voltage range 120 -220 Volts IP -66 surge protection minimum 5KV with flash indication, driver should be potted / CE certified/R certificate and Driver efficiency 85% including making connection complete all as specified and directed.

Supply and fixing in replacement energy saving LED Street light of 60 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, minimum 110 lumen/watt, cool/warm as per site requirement , operating voltage range 120 -220 Volts IP -66 surge protection minimum 5KV with flash indication, driver should be potted / CE certified/ R certificate and Driver efficiency 85% including making connection complete all as specified and directed.

Supply and fixing in replacement energy saving LED street light of 45 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, light source should be multi LED SMD system efficacy should be minimum 110 lumen/watt cool/warm as per site requirement ,voltage range 120 -220 Volts IP -66 THD Less than 10% surge protection minimum 5KV with flash indication, driver should be potted / CE certified/R certificate and Driver efficiency 85% including making connection complete all as specified and as directed.

Supply and fixing in replacement energy saving LED street light of 30 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, light source should be multi LED SMD system efficacy should be minimum 110 lumen/watt cool/warm as per site requirement ,voltage range 120 -220 Volts IP -66 THD Less than 10% surge protection minimum 5KV with flash indication, driver should be potted / CE certified/R certificate and Driver efficiency 85% including making connection complete all as specified and as directed.

Supply and fixing in replacement energy saving LED Flood light/high bay light of 150 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, light source should be multi LED SMD system efficacy should be minimum 100 lumen/watt cool/warm as per site requirement ,voltage range 120 -220 Volts IP-66 driver should be potted / CE certified/R certificate and Driver efficiency 85% including making connection complete all as specified and as directed.

Supply and fixing in replacement energy saving LED Flood light/high bay light of 100 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, light source should be multi LED SMD system efficacy should be minimum 100 lumen/watt cool/warm as per site requirement ,voltage range 120 -220 Volts IP-66, driver should be potted / CE certified/R certificate and Driver efficiency 85% including making connection complete all as specified and as directed.

Supply and fixing in replacement energy saving LED Flood light/high bay light of 80 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, light source should be multi LED SMD system efficacy should be minimum 100 lumen/watt cool/warm as per site requirement ,voltage range 120 -220 Volts IP -66, driver should be potted / CE certified/R certificate and Driver efficiency 85% including making connection complete all as specified and as directed.

Supply and fixing in replacement energy saving LED Flood light/high bay light of 50 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, light source should be multi LED SMD system efficacy should be minimum 100 lumen/watt cool/warm as per site requirement ,voltage range 120 -220 Volts IP -66, driver should be potted / CE certified/R certificate and Driver efficiency 85% including making connection complete all as specified and as directed.

Supply and fixing in replacement energy saving LED Flood light/high bay light of 30 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, light source should be multi LED SMD system efficacy should be minimum 100 lumen/watt cool/warm as per site requirement ,voltage range 120 -220 Volts IP -66, driver should be potted / CE certified/R certificate and Driver efficiency 85% including making connection complete all as specified and as directed.

Supply and fixing in replacement energy saving decorative LED bollard light for pathways of 9/10 Watt Capacity extruded aluminium body with opal polycarbonate diffuser for spot free light 220 Volts IP -65 including making connection complete all as specified and as directed.

Supply and fix in replacement LED decorative post top clear light fitting 40/45 watt for 360 degree indirect light with IP 65 protection, resistant to impact and corrosion having glare free and better uniformity light, complete all as specified and directed.

Supply and fixing in replacement energy saving decorative LED Spot/bush light of 9/10 Watt Capacity high pressure die cast aluminium housing with seal toughned glass cover, cool/warm as per site requirement ,voltage range 120 -220 Volts IP -65 including making connection complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of smart security light fitting of 120 Watt with Motion sensor based dimming , cool white, Luminous Efficacy 110 Lm/W, IP 66, with surge protection complete all as specified and as directed by Engr-in-Charge.

Supply and erecting in true vertical position steel tubular swaged pole 09 mtr long type 410 SP-31) complete with base plate and bracket fixed at top , painted internally throughout and externally up to the embedded depth with two coats of black bituminous paint and remaining external portion with two coats of aluminium paint over a coat of red oxide primer including providing 30cm wide alternate strips with sky blue and white synthetic enamel paint upto 1.2m high from ground level including excavation work (1.5*0.6*0.6 mtr) and PCC (0.6*0.6*1.5 Mtr) for erecting electric pole of length 9 mtr pole complete all as specified and directed.

Material and labour for preparation of rusted surface of steel pole with brackets of any size/shape/type at any height and painting with aluminium paint and alternate colour of sky blue 3 strip and white paint 2 strip of 30 cm height at bottom of the pole (appx 1.5 mtr) and numbering the pole (with 5 cm height) black paint with back ground yellow paint in 10 cm round dia, complete all as specified and as directed by Engr-in-Charge.

M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles, earth pit ,including provision of necessary form work, finishing even and smooth without using extra cement including applying exterior emulsion paint (apex) complete all as specified and as directed by Engr-in-Charge.

M&L Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in road cutting filling, foundation, fencing post struts etc. complete all as specified and as directed by Engr-in-Charge.

Supply laying and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade 3.5 core 25 Sqmm cross sectional area including taking out existing unserviceable cable complete all as specified and directed. Note:- (i) Excavation and earth work shall be measured and paid for separately. (ii) Thimble for cable termination on Junction box/panel as required should be included in this rate.

All as per item No 25 here-in-before but of size 16 Sqmm x 4 core

All as per item No 25 here-in-before but of size 10 Sqmm x 4 core

Supply and fixing in replacement FRLS PVC insulated copper conductor of Size 1.5 Sqmm 3 core with cable thimble/Lux made of copper in surface /recessed as required for bollards/LT panels etc with necessary connections including PVC conduit 25 mm Complete all as specified and directed

Supply and fixing in replacement FRLS PVC insulated copper conductor of Size 2.5 Sqmm 3 core with cable thimble/Lux made of copper in surface /recessed as required for bollards/LT panels etc with necessary connections including PVC conduit 25 mm Complete all as specified and directed

Supply and fix in replacement GI pipe light grade 40 mm dia for cable protection laid under road/path/culvert or trenches, complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 m in depth for laying of pipe/cable and getting out old unserviceable cable / pipe in any type of soil including cutting of grass and bushes complete all as specified and directed.

Returning filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed by Engr-in-Charge.

Removal of excavated soil surplus to the requirement to a distance n.exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.

Material and labour for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

M&L for laying in trenches burnt brick sub class 'B' for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified.

Supply and fixing in replacement PVC insulated weather proof and sheathed flat twin core cable with aluminium conductor cable of size 6.00 Sqmm drawn through conduit pipe/bracket or along the wall/pole or as in trenches including fixing on conduit/bracket and making connection to the fitting with over head line i.e connection to junction box fixed at bottom of pole complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement PVC insulated weather proof and sheathed flat twin core cable with aluminium conductor cable of size 10.00 Sqmm drawn through conduit pipe/bracket or along the wall/pole or as in trenches including fixing on conduit/bracket and making connection to the fitting with over head line i.e connection to junction box fixed at bottom of pole complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs pole mounting junction boxes made out of SMC of size 250 x 200 x 105 mm(HxWxD) with 3 phase strip and 1 neutral strip, side hinged door fixed to the base with hinges suitable for 4 wire system including MCB SP 6 Amps 240 volts - 01 No, Shockproof and rustproof Cable entry from bottom and/or sides,100% weatherproof ,including Pole mounting arrangement like clamps, nuts etc, maintenance-free complete all as specified and as directed by Engr-in-Charge.

M&L for street light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of unserviceable LT Feeder Pillar Box out door type 1.1 KV made out of MS CRCA sheet of size 3.15 mm thick having 4 Nos Aluminium bus bar of size 200 Amps for phase and 100 Amps for neutral fixed on LT 8 Nos insulators of size 0.60Mx0.45MX 0.45M with 04 legs made out of MS angle 50X50X5 mm & 0.75 Mtr in length/Height with locking arrangements, front and back opening, including danger notice board with skull & bone monogram & indicating 1100 volts danger board and incoming and out going connections and testing on completion, complete all as specified and directed.

Supply and fixing in replacement astronomical timer distribution Board 40 Amps rating, double door, IP 54 Rated, programmable Analog time switch auto operation 415 V AC, 50 HZ, contactor of cap 40 Amp TP, AC 3 rating, contactor coil voltage 230 V rating and MCB TPN 40 Amps, C curve with locking facility and mounting arrangements/PCC foundation and excavation for erecting complete with complete wiring all as per site requirement for operating street/security lights, complete all as specified and as directed by Engr-in-Charge.

M&L in replacement for Earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 3 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-0 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe complete all as specified and as directed by Engr-in-Charge.

M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate for foundation of bollard light including provision for grouting looping box of suitable size complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs junction boxes made out of SMC for bollards with 3 phase strip and 1 neutral strip, side hinged door fixed to the base with hinges suitable for 4 wire system including Shockproof and rustproof Cable entry from bottom and/or sides,100% weatherproof, including Pole mounting arrangement like clamps, nuts etc, maintenance-free complete all as specified and as directed by Engr-in-Charge.

S&F in replacement MCCB 4 Pole alongwith spreader/link, 415 V, adjustable type 250 Amps with breaking capacity 36 KA suitable for fixing in inside LT Panel/feeder pillar of existing MCCB all as specified and directed by Engr-in-charge .

S&F in replacement MCCB 4 Pole alongwith spreader/link, 415 V, adjustable type 125 Amps with breaking capacity 36 KA suitable for fixing in inside LT Panel/feeder pillar in replacement of existing MCCB all as specified and directed by Engr-in-charge.

S&F in replacement MCCB 4 pole, alongwith spreader/link, 415 V, adjustable type 200 Amp with breaking capacity 36 KA complete suitable for fixing in inside LT Panel/feeder pillar in replacement of existing MCCB all as specified and directed by Engr-in-charge .

Deepak Electricals (BID ID -3349377)

Neeraj Enterprises (BID ID -3344019)

akenterprises (BID ID -3349166)

M/S Delhi Engineering Co. (BID ID -3348080)

R N Enterprises (BID ID -3348268)

M/S S.K.Electricals (BID ID -3349293)