Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-AOC | ₹3.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹3.0 L+₹1,036.04 (0.35%)Rejected-AOC | ₹3.0 L+₹1,036.04 (0.35%) | L2 | Rejected-AOC L2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not Qualified in PQR |
Tender Value
₹3.0 L
EMD Value
₹3,050
Closing Date
5 May 2025, 12:00 pmClosed
Superintending Engineer, EDC, Lalitpur
Behind of LIC, Elite Crossing Jhansi Road, Lalitpur
Shifting of 11KV Line in the area of EDD, Mehroni under Deposite Scheme
2025_DVVNL_1023427_1
17/EDC/L/2024-25
Open Tender
Electrical Works
Percentage
120 days
Lalitpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
Superintending Engineer, EDC, Lalitpur
₹3,050
21 Jan 2026
29 Mar 2025
5 May 2025
29 Mar 2025
5 May 2025
29 Mar 2025
PART-A
Carriage of following line materials for 11 kv line from Center Store, Lalitpur to the Site of work including measuring weiging loading unloading at both ends and proper stacking at safe site.
PCC Pole 8.5Mtr. Long
11KV V-type Steel Cross arm 65x65x6mm
11KV F Clamp for PCC Pole
Pin Insulator 11KV
11KV Pin Nut with
11KV Disc Insulator 45 KN
11KV Disc Fitting (B&S) 70Kn
Cross Arm Holding Clamp
Stay Rod
Earth Rod
Stay Clamp
ACSR Weasel Conductor
Allu. Join Sleeve for ACSR Weasel Conductor
Pole Clamp with nut & bolt
Stay wire
Stay Loop Insulator
M.S. Top Channel 100x50x5x2240mm
Cross Bracing M.S. Angle
Number Plate
Aluminium binding wire and tape
G.I. Wire 6 SWG
3x185Sq.mm Aluminium 11KV XLPE Cable
PG Clamp for weasel
Danger Board with Clamp for 11KV Line
Barbed wire
alluminium Tape
Extra for Stays at Angel Location
Extra for Stays at Road Location
11KV J/Kit outdoor Type 3x185 Sq.nn
11KV Jointing kit 3x185Sq.mm XLPE S/T
Stone Pad
Carriage Material of Scrap form Pit Site to JE Store/ Store Centre, Lalitpur
PART-B
Erection of the following supports after making of pits as per RESSPO norms & filling of pits by concrete of ratio 1:4:8 (cement brick balast & sand). Fitting of all accessories as cross arm, top channel, bracing angle, pin insulator, disc insulator, danger board, number plate, barbed wire & clamps etc. Plinthing of support above 300mm ground level by concrete of ratio 1:4:8 (cement brick balast & sand) will be done at the time of erection of pole. Painting of PCC Pole structure as per RESSPO norms also (all type of paints, red oxide primer, nut, bolts & grouting material etc. will be provided by contractor).
PCC Pole 8.5Mtr. Long
11KV V-type Steel Cross arm 65x65x6mm
11KV F Clamp for PCC Pole
Pin Insulator 11KV
11KV Pin Nut with
11KV Disc Insulator 45 KN
11KV Disc Fitting (B&S) 70Kn
Cross Arm Holding Clamp
Stay Rod
Earth Rod
Stay Clamp
ACSR Weasel Conductor
Allu. Join Sleeve for ACSR Weasel Conductor
Pole Clamp with nut & bolt
Stay wire
Stay Loop Insulator
M.S. Top Channel 100x50x5x2240mm
Cross Bracing M.S. Angle
Number Plate
Aluminium binding wire and tape
G.I. Wire 6 SWG
3x185Sq.mm Aluminium 11KV XLPE Cable
PG Clamp for weasel
Danger Board with Clamp for 11KV Line
Barbed wire
alluminium Tape
Extra for Stays at Angel Location
Extra for Stays at Road Location
11KV J/Kit outdoor Type 3x185 Sq.nn
11KV Jointing kit 3x185Sq.mm XLPE S/T
Stone Pad
Concreting of support(0.268 cu.m/Pole)
Concreting of Stay
Dismantling of PCC Pole, ACSR Weasel Conductor and other line items as per estimate or site
MALKHAN (BID ID -5168340)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .