NIT No. 7 (2025-26) Item no.17

Name of t/wells :-1. Sadh Nagar, Near Gurudwara, Gali No.2 2. Vijay Enclave tent wala School 3. Mahavir enclave, Sunil Samadhi 4. Dwarka TW Sec.7 B- Block 1 5. Palam No. 4 Lowering & lifting of sub/sets from bore by taking out double flanged GI pipes, submersible P/Set, Cable, cutting of rusted nuts and boltsetc and replacement of damaged D/F GI pipes, cable, defective pump set etc as per site requirement and lowering of sub P/set, sub cable, GI Pipe etc as required, jointing of cable from sub P/Set along with holding of cable with pipes and jointing of D/F pipes etc with nuts bolts and rubber packing etc. The job includes hiring of all T & P, tripod stand, chain pulley block and other material handling equipments, Safety gadgets as required and consumable material (rubber packing and Nuts bolts) will be arranged by the firm as per site requirement by crane. (SOR 27.1)

S/O PVC insulated PVC sheathed flat submersible cable with plain copper conductor having three core 4 sq mm 415/1100V (each roll 100 mtr) Make :- Havells/Fort Gloster/I CL/ CCI/ ICC/ Universal/Grandlay/Havells/DJB approved+B11:B17

Making/supply of 50mm, 3 mtr long approx double flanged (OD 150mm)GI Pipe,medium conforming to IS:1239(2004)SWS,B Class having 3 No L-Type brackets duly welded on each side of flange. The flanges having four holes and One cut for cable. Make- TATA/Jindal Hisar

Supply and fixing of Hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items. 1. MCCB 63 Amp, 4 Pole-1 No 2. RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1 No 3. Fully automatic star delta starter of 10HP. 4. LED Indicating lamps with fitting (a set of 3 lamps) 1 Set. 5. Shunt capacitor of 5 KVAR with three phase isolator 1 No . 6. Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection. High voltage-low voltage protection. 1 No 7. Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1 No 8. Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make

G.I tail piece 50 mm dia 0.5 mtr. Long with one end threaded & other end flanged having 3 No L-Type brackets duly welded with flange having 4 Nos. hole & cut for cable.

F/S of MS bore cOver suitable for 200mm dia MS Pipe. The bore well be fabricated with MS flat size 50mm width 5mm thickness and MS sheet 18SWG in 2 half pieces ilc suitable clamping arrangement

GI double flanged 90 degree 50 mm dia size bend

HYDROCON ENGINEERS (BID ID -1595056)