A.R and M.O Dakolar Shingla Shaneri road Km. 0.000 to 16.450

Earth work in excavation for structure in all depth as per drawing and technical specification Clause 305-1 including setting out, construction of shoring and bracin, removal of stumps and other deleterious material and disposal in all lead and lift including dressisng of sides and bottom and back filling in trenches with excavated suitable material. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling and wedging out of rock(where blasting is prohibited) as directed by the Engineer-in-Charge.all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.

Providing and laying in position specified grade of rainforced cement concreteexcluding the cost coarse sand : 4 graded stone aggregate 20 mm nominal size) including all leads lifts and carriage of of centering shttering finisshing and rainforcement. All work upto plinth level 1:2:4 (1 cement:2

Providing and laying in position cement concrete, of specified grade exluding the cost of centering and shttering. All work upto plingth level 1:3:6 (1 cement :3 coarse sand:6 graded stone aggregate 40 mm nominal size). including all leads lifts and carriage of material & as per direction of Engineer-in-Charge.

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate) finsihed with a floating coat of neat cement, including, cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate. including all leads lifts and carriage of material & as per direction of Engineer-in-Charge.

Steel reinforcment for R.C.C. work including straightning, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel & midum tensile steel bars.

Providing and fixing stainless steel (Grade 304) railling made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature ( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railling with necessary accessories and stainless dash fastners, steelness steel bolts etc. of required size, on the top of the floor or the side of waist slabe with suitable arrangment as per approval of Engineer-in-Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) including seating arrangment/stainless steel bench as per site requirement / as per Engineer-in-charge.

Providing at all heights, level and locations Aluminium profile industrial trughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5 x65mm EPDM seal complete upto required pitch in horizontal, vertical or curved surface i/c cutting to size and shape where required as per specifications, detail drawing and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour scaffolding, machinery fixing and approved sealent where required etc. but excluding the cost of purlins, rafter & trusses 0.91 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm including all leads lifts and carriage of material & as per direction of Engineer-in-Charge.

Providing and fixing 4 mm thick ACP sheet for representation of Himachal culture/demostration regarding beauity of nature and site of turiest attraction place mantioned above sheet with necessary screw/nuts & bolts/ nails, including complete Architect design of approvd paint/colour on face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately) including all leads lifts and carriage of material & as per direction of Engineer-in-Charge.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel frade, 5/7 microns epoxy primer on both side of the sheet and polyester top Barge board (upto 300mm) including all leads lifts and carriage of material & as per direction of Engineer-in-Charge.

Providing and fixing 15 mm thick false celling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficint) of 0.50 (minimum) as per IS 8225;1987, Light reflectance of 58% (minimum), Non combustible as per BS;476 (part 4), fire performance as per BS:476 (part 6 & 7), humidity resistance of 100% thermal conductivity <0.043 W/m K as per ASTM 518:1991, in true horizontal level on the existing frame work consisting of T-sections and L section suitably fixed according to tile size as per direction of Engineer-in-charge. including all leads lifts and carriage of material & as per direction of Engineer-in-Charge