Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹13.7 Laccepted-finance | ₹13.7 L | accepted-finance |
Tender Value
₹25 L
EMD Value
₹62,500
Closing Date
14 May 2026, 9:30 pmClosed
Directorate of Municipal Administration
water supply maintainance at TMC Hallikhed B limits
DMA/2025-26/OW/WORK_INDENT56606
DMA/2025-26/OW/WORK_INDENT56606
Open
Other Works
DMA Town Municipal Council Halikheda
4 documents required · 4 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
Work done certificate in last 5 years satisfactory completed at least one similar nature of WATER SUPPLY work of value not less than Rs.12.50 lakh as a prime contract
Contractor class-4 and above Registration Certificate
List of existing commitments and on-going works
Annual Turnover certificate of last 5years in which achieved in at least two financial years an average annual financial turnover usually not less than the estimated cost that is 25.00 lakh
₹630
₹62,500
14 May 2026
27 Apr 2026
15 May 2026
13 May 2026
water supply maintainance at TMC Hallikhed B limits
Labour charges for laying and jointing GI pipes with earth work including fixing collars, elbows, tees, bends, gland cocks and other fittings with cuts and threads, white lead paints wherever necessar...
3.3 Cutting Asphalt /Concrete road surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps incl...
3.4 Road Reinstatement of Asphalt /Concrete roads after leak attending with earth work excavation of compacted soil depositing on bank with all lead and lifts including danger lighting and barricading...
9.1 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations ...
10.5 Labour charges for attending to repairs to the PVC pipes by earth work excavation cutting the old pipe installation and jointing of new pipes to the existing old pipe to the depth and line, level...
10.8 Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 63mm dia PVC coupl...
10.8 Supplying of special moulded variety PVC couplers as per IS 7834/
1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest
amendments to walk site etc. complete. 75mm dia PVC coup...
10.8 Supplying of special moulded variety PVC couplers as per IS 7834/
1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest
amendments to walk site etc. complete. 90mm dia PVC coup...
10.8 Supplying of special moulded variety PVC couplers as per IS 7834/
1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest
amendments to walk site etc. complete. 110mm dia PVC cou...
10.8 Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 160mm dia PVC coup...
10.9 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 10.9.5 63 mm dia PVC Elbows
10.9 Supply and delivery at site special moulded variety PVC elbows as per
IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments 10.9.6 75 mm dia PVC Elbows
10.9 Supply and delivery at site special moulded variety PVC elbows as per
IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments 10.9.7 90 mm dia PVC Elbows
10.9 Supply and delivery at site special moulded variety PVC elbows as per
IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments 10.9.8 110 mm dia PVC Elbows
10.9 Supply and delivery at site special moulded variety PVC elbows as per
IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments 10.9.10 160 mm dia PVC Elbows
10.10 Supply and delivery at site special moulded variety PVC tee as per IS
7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments 10.10.5 63 mm dia PVC Tee
10.10 Supply and delivery at site special moulded variety PVC tee as per IS
7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments10.10.6 75 mm dia PVC Tee
10.10 Supply and delivery at site special moulded variety PVC tee as per IS
7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments 10.10.7 90 mm dia PVC Tee
10.10 Supply and delivery at site special moulded variety PVC tee as per IS
7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments 10.10.8 110 mm dia PVC Tee
10.10 Supply and delivery at site special moulded variety PVC tee as per IS
7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments10.10.10 160 mm dia PVC Tee
10.11 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments 10.11.5 63 mm dia PVC BEND
10.11 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments 10.11.6 75 mm dia PVC BEND
10.11 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments 10.11.7 90 mm dia PVC BEND
10.11 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments 10.11.8 110 mm dia PVC BEND
10.11 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments 10.11.10 160 mm dia PVC BEND
10.13 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments 10.13.6 63 mm dia PVC REDUCER
10.13 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments 10.13.6 75 mm dia PVC REDUCER
10.13 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments 10.13.6 90 mm dia PVC REDUCER
10.13 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments 10.13.6 110 mm dia PVC REDUCER
10.13 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments 10.13.6 160 mm dia PVC REDUCER
10.14 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints ...
10.14 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints ...
10.14 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints ...
10.14 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true
to line, level and perfect linking at joints ...
10.14 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints ...
1.17 Earth work excavation for pipeline trenches in all kinds of soils by mechanical
means as per drawing and technical specifications, including setting out,
construction of shoring, strutting, barri...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
11.1 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, inc...
11.1 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, inc...
11.4 Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same...
supply and delivery at site wrought middle steel (galvanized) GI socket
confirming to IS 1239-II, 1991 with latest amendments if any For 15 mm dia GI socket
supply and delivery at site wrought middle steel (galvanized) GI socket
confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI socket
11.7 Supply and delivery at site wrought middle steel (galvanized) GI elbow
confirming to IS 1239-II, 1991 with latest amendments if any for:11.7.1 For 15 mm dia GI elbow
11.7 Supply and delivery at site wrought middle steel (galvanized) GI elbow
confirming to IS 1239-II, 1991 with latest amendments if any for:11.7.5 For 50 mm dia GI elboW
11.19 Providing GM gland cocks tested against hydraulic pressure of 20 Kg/
m² with ISI mark.11.19.1 For 15 mm dia GM gland cocks
11.8 Supply and delivery at site wrought middle steel (galvanized) GI bend
confirming to IS 1239-II, 1991 with latest amendments if any.11.8.6 For 50 mm dia GI BEND
11.9 Supply and delivery at site wrought middle steel (galvanized) GI tee confirming to IS 1239-II 1991 WITH LATEST amendments 11.9.6 For 50 mm dia GI TEE
11.15 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat sc...
12.24 Labour charges for Lifting of non functioning submersible pump set along
with cable and GI pipes (Each length = 6m) ). for 50 mm
12.28 Labour charges for Erection of new / repaired submersible pump set along with GI pipes (32mm / 50mm), cable (New submersible pump set if required will be supplied by the department free of cost ...
13.1 Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipmen...
13.1 Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipmen...
13.2 Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments an...
13.2 Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments an...
13.2 Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments an...
13.2 Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments an...
13.2 Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments an...
13.3 Replace the components of motor parts of submersible pump sets,items requiring replacements decided by the departmental officials,with respective make of damaged ones, including all materials, la...
13.3.20 The lifting of submersible pumpset from well.
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
13.11 Providing Submersible Pump Set of 150mm dia suitable for bore well and
confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necess...
13.11 Providing Submersible Pump Set of 150mm dia suitable for bore well and
confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt
Motor as per specifications, to work site as per necess...
13.22 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments 13...
13.27 Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty ...
13.30 Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark
13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with
ISI etc complete suitable for Single phase Pumpsets
13.36 Providing main connection from pole PVC insulated sheathed steel wire
cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.
13.43 Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments.13.43.1 Upto 7.5 HP centrifug...
2.23 Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, ...
795 Solvent cement adhesive
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
13.24 Supply and delivery at site of brand new best make gate valve as per IS
778/1984 with ISI Mark and as per its latest amendments 13.24.1 Size 50 mm
13.25 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 13.25.1 Size 50 mm
13.26 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
WATER SUPPLY.doc
Tender Document • 0.52 MB
Download all tender documents and submit your bid