SPECIAL REPAIR TO ROAD AT KLP LOC OF 112 ENGR REGT UNDER GE (WEST) MATHURA

Amount

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with bituminous primer paving bitumen VG-10 @ 5 kg per 10 sqm complete all as specified and directed.

M&L for bituminous semi dense asphaltic concrete 30 mm consolidate thickness with 5.5.% binder content paving bitumen VG-30 by weight of total mix and OPC-43 grade using as filler material laid with mechanical paver rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed. Note for item No 02:- (i) Bituminous concrete shall be mixed in hot mix plant, transported from plant to work site and laid/spread by means of mechanical paver finisher . (ii) Filler for bituminous concrete shall be OPC-43 grade @2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any negative variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ Rs.53.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said item. (iv) Work shall be executed as per design mix approved by GE.

Repairs to pot holes any depth, n.exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, path etc cutting around edges to at least 25 mm in depth making good by filling in screened and graded road materials over a well ramming including supply of road metal complete all as specified and directed.

M&L for premix bituminous, macadam using with paving bitumen of VG-30 grade of consolidated thickness 75mm or less with 4% binder content by weight of total mix, laid & rolled and compacted to required gradient and camber with 8 to 10 tonne power roller complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. complete all as specified and directed.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed.

S&F in repair convex mirror 800 mm dia made up of polycarbonate reflective mirrors, outdoor use with hood and complete with mounting hardware for upto a height of 1500 mm, above GL and 45 cm below the GL with medium grade MS pipe 50 mm dia including two coats of anticorrosive paint over a coat of red oxide primer body made of ABS embedded in PCC (1:2:4) type B-1 of block size 30x30x45cm including PCC (1:3:6) type C-1 in foundation and necessary excavation in post hole complete all as specified and directed

S&F in repairs speed hump suitable for heavy duty, size 250x325x50mm made of strudy plastic high resistance, re coloured (Black and yellow) bottom of bumps to be filled with cement conc 1:1.5:3 and curved bump studded with reflceters on either sides, fixed with epoxy and bolts by drilling 6mm dia and 75mm long fasteners as per manufacturer instruction complete all as specified and directed.

Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 1500 x 900 mm rectangular with support length of 2700 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. and sign board fixed with cement concrete 1:2:4, 250x250x700mm block embeded by 600mm in ground cured & compacted well including dismantling of old board complete all as specification and direction.

Rahul Construction Co (BID ID -3164182)

M/s M S Sharma and Co. (BID ID -3170013)

VANI CONSTRUCTION (BID ID -3164138)

Tarun Builders (BID ID -3163836)

R N AGRAWAL (BID ID -3169890)