RENOVATION OF TWO CLASS ROOM BUILDING PUES IN PULIYAMPATTI PUES PULIYAMPATTI PANCHAYAT Under SIDS 25-26

Amount

Description

Removal of Chipping the damaged flooring

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Dismantling Pressed tiles & Wethering Course

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Colour Washing with best Distempering two Coats in to primer coat and two coats with oil bound distember over cement plasterd surface ceiling and other Old surface and including clearing,preparing the surface and etc.,complete.

Painting two coat using readymixed emulsion paint of approved quality and colour over priming coat (Old) including cost and all labour charges etc. complete

Painting two coats over Old Iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Black board Painting two coats over block board using ready mixed black board paint including cost and conveyance of paint and all labour charges etc complete.block board paint

Special design Art work with first class quality emulsin paint includingwall putty ,Primng coat etc.complete .

Light Point & Fan Point - SD 20

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round block son wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting - SD 88

Cealing Fan - SD 110

Plug Point SD - 36

Cost and Supply of Steel Windows with Double Leaves Shutters.

Repairs to Doors including welding and jointing for all labour charges etc.,

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffoldingarrangements, labour charges, etc., as per standard specification.

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralichinges,tower bolt, handles, multi purpose locks etc., as directed bytheDepartmental Officers. The design pattern, water proofplywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Provision For Name Board

Providing Photo Charges etc

Provision For GST 18 %

Provison for Labour welfare fund 1%

KALAISELVAN (BID ID -1377180)