Providing Electrification Works to Tirukoilur Revenue Divisional Office Building at Kallakurichi District

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point. (for electronic regulator) (5 points / Coil) Higher End

Supply and fixing of fancy glass shade and 9W LED bulb.

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb.

Supply and fixing of 20 W IP65 surface panel light fitting (Make like Luker Cat No. LOR65 20 / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Recess mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver down lighter fittings (Havells model No. INTEGRANEODLR10WLED830S / Equivalent) on ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically desined ultra modern 34 W 2' x 2' Recess Mounting luminaire with high brightness LED fitting (Havells model No. PLUTO NEO 2X2 PLR 34W LED857S / Equivalent) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 34 W 2' x 2' Surface Mounting luminaire with high brightness LED fitting (Havells model No. Pluto NEO PANEL 2x2 LHEWEJP7PL 1W034) (Havells / Crompton /Wipro ) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 15 W 1' x 1' Recess Mounting luminaire with high brightness LED fitting (Havells model No. PLUTO1X1PLR15WLED857S) (Havells / Crompton / Wipro) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with double side connection (Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with double side connection (Havells / equivalant) with conduit pipe suspension from the ceiling PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm down rod on the existing fan clamp.

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 375 mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep (light duty) AC exhaust fan.

Supply and fixing of 3nos. 6A two module 3 pin socket, 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1 no. 6/16A two module socket, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 25 A Flush type Wall Socket 25 A DP MCB complete set for AC Plug in flush with wall with earth connection. (For AC Plug)

Supply and fixing of 32A DP Isolator in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. The DP MCB Enclosure should be of Legrand / Hager make only.

Supply and fixing of 32A FP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection The FP MCB & Enclosure should be of Legrand / Hager make.

Supply and fixing of 63A FP Isolator in suitable FP sheet enclosure in flush with wall and making good of the concealed portion with earth connection. The MCBIsolator & Enclosure should be of Legrand (MDS)/Hager(L&T) make.

Supply and fixing of 40 A Rotary switch with 3 Nos Indicator combined with switch insuitable sheet steel encloser on wall with earth connection only.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of Vertical type 6 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 63 A FP MCB as incoming and 18 Nos. of 6A to 32A SP MCB outgoing as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like Legrand (MDS) / Hager (L&T) make)

Supply and fixing of Vertical type 6 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 63 A FP MCB as incoming, 1 No. 32 A TP MCB and 15 Nos. of 6A to 32A SP MCB outgoing as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like Legrand (MDS) /Hager (L&T) make)

Supply and fixing of Vertical type 8 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 100 A FP MCB as incoming, 2 No. 63 A TPMCB, 2 Nos 32 A TPMCB , and 12 Nos. of 6A - 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like Legrand (MDS) / Hager (L&T) make)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and run of 4 of 16 sq. mm (101/0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 sq.mm copper wire and making good of the concealed portion.

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3-1/2 x 70 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Supply erection, Testing and commissioning of 2 TR split type 5 star rated AC units fitted with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc., and 1 No indoor I wall mounted 2.0 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc., chord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50Hz single phase AC supply. (Make - Carrier/ OGeneral/ Daikin/ Toshiba)

Supply and fixing of 5 KVA voltage stabilizer (V guard /Eq.make ) suitable for 2.0 tons capacity split type air conditioner with 3 minutes time delay and low / high voltage cut off switch (wall mounting) with necessary wire connection.

Supply and laying of 5/8'' and 3/8'' copper pipe. (Extra beyond 3Mtrs supplied with AC Unit)(For split AC Unit)

Supply and Fixing of MS stand for fixing outdoor units.

Supply and fixing of 2.5 KVA Automatic invertor with input Voltage 180V-260V and output voltage 200V -230V 50Hz with 2 No 12V 150AH tubular Battery and testing complete with connection.

Supply and fixing of 4 MP Fixed Mini Bullet Network Camera. High quality imaging with 4 MP resolution. Excellent low-light performance via powered-by-DarkFighter technology. Efficient H.265+ compression technology Clear imaging against strong back light due to 120 dB true WDR technology. Water and dust resistant (IP67) Robust structure design with full metal material Make:Hikvision/equivalent.

Supply and installation of 4U Metal Rack with front class door, Lock and Key, also with power manager.

Supply and installation of 16 channel 2-SATA NVR - (Network Video Recorder). Up to 16 channel IP cameras can be connected. Supports decoding 265+/H.265/H.264+/H.264 video formats. Up to 4K high-definition live view, storage and playback. Up to 8-ch @ 1080p decoding capacity. Up to 160 Mbps high incoming band width ensures IP cameras can be connected. 1 HDMI and 1 VGA interfaces: both interfaces support independent video output. 2 HDDs for continuous video recording. Make: Hikvision

Supply and installation of 4TB visual HDD (Hard Disk Drive) with SATA interface. Engineered specifically for surveillance security systems. Tuned for write-intensive, low bit-rate, high stream-count applications typical to most surveillance applications. Prioritized write-operations for maximized surveillance performance. TLER and ATA streaming support.Make: Western Digital/ equivalent.

Supply and Installation of 32" inches professional commercial display Make: Panasonic/LG/Samsung.

Supply and fixing of RJ45 LAN socket with suitable module box and face plate in flush with wall and making good of the concelaed portion. (Make-Legrand/Equivalent)

Supply and installation of Ethernet patch Cord 2 m length.

Supply and installation of D-Link Make 24 Port Fully managed 10 /100 /1000 Layer-2 LAN Network Switch.

Supply and installation of D-Link Make 24 Port patch panel fully loaded.

Supply and fixing of 25mm PVC rigid pipe on wall and ceiling with suitable colour for CCTV and LAN.

Supply and run of Cat-6 cable in existing PVC rigid pipe on wall and ceiling.

Supply and installation of 1 KVA UPS with 150AH Batteries with 2 hours power backup. Make: Microtek /Numeric / Equivalent.

Testing, Programming and commissioning Charges for 4 MP Camera, NVR, POE Switch, Hard Disc, UPS and Cables, Camera, NVR etc.

Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 10 persons capacity passenger lift with Machine room as per the following Technical specifications. Technical specifications. 1. Location : RDO Office at Thirukoilur in Kallakurichi District 2. No of Lift : 1 No 3. Type of lift : Passenger lift. 4. Capacity of lift : 10 persons capacity passenger lift (680 Kgs) 5. Speed : 1.5 Metre / Sec 6. Type of Drive: specific variable voltage variable frequency V3F drive with enhanced ride comfort and leveling functions. 7. No. of floors: Ground +1 floors 8. Total Travel: 3.3 metres(Approximate) 9. Levelling Accuracy: High level accuracy with smooth and jerk free stopping. 10. Construction of Car: High quality stainless steel car, Neat hair line finish with mirror and handrails. 11. Position of machine: Directly above the lift well. 12. No. of landing entrance: 2 Nos 13. No. of car entrance: one in front only. 14. Car entrance door: power operated V3F drive Centre opening sliding stainless steel scratch proof door with hair line finish. 15. Landing entrance door: power operated V3F centre, opening sliding stainless steel door with hair line finish with provision for emergency key opening at all landings.

33. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year. 34. Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor with one handset in the lift car and another handset in the lift machine room with telecom exchange unit with one trunk and three extension link proton 103, matrix telecom unit and required length of single twisted pair with thickness of 0.5 mm to 1 mm connecting the handsets and telecom exchange unit. 36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 37. Floor announciator with music. 38. Special features: a. Infra red door sensor with full height screen. b. Full width half height rear panel mirror. c. Tubular stainless steel hand rail in cars. d. Voltage stabilizer for circuit control.

e. Stainless Steel signal fixtures. f. Vandal proof S.S. Button with S.S. cover g. SS door frames for landing doors. h. VF door operator. i. Call Register signal j. Stainless steel facia plate for car operating panel and landing fixtures. k. Steel ladder for machine room. l. On – Off switch for fan and light m. Over load warning indicator with audio announcement. 39. Provision of architraves covering all three sides upto a width of 300 decolum sheet on plywood with TW frame with aluminium beading architraves should also cover the thickness of still level door frame at the landing and indicator boxes at all landings. 40. Other standard features: Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, single reduction worm gear, electro magnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joint joist for mounting the machineries. 41. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of not less than one year. 42. Site testing in accordance with IS 14665 should be carried out at the time of handing over.

43. Supply of operation and maintenance manual with necessary tools for operation.

Maansi Builders (BID ID -1543239)

Rajasekar (BID ID -1542433)