PROVISION OF CHAIN LINK FENCING WITH GATE AND HARDSTANDING AT A B C BLOCK AND PROVISION OF CERTAIN REVENUE AND MINOR WORKS IN TECH AREA AT AFA HYDERABAD

Amount

SCHEDULE A PART (B/R) Excavation in post holes each n exc 0.5 Cum getting out in hard/dense soil returning,filling in and ramming earth or broken rubble mixed earth around in layers n.exc 25 cm and removing surplus excavated material to a distance n.exc 50m and depositing where directed at a level n exc 1.5mtr above the starting point all as specified and as directed.

M&L for Plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate for foundation filling and mass conctrete all as specified and as directed.

S & F Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F Mild steel round bars 10mm dia and over cut to length bent to shape required incl bending hooking ends necessary to fix with angle iron post for support or stays conforming to Fe 290 Grde E- 165 all as specified and directed

S&F MS bolt machine made with hexognal or square head one end and screwed the other or screwed both end, each scewed end to be fitted with 2 washers and one hexonal or square 75 mm long, dia of neck 10-12 mm all as specified and as directed.

M& L Preparing new steel surfaces of any description, n exc 10cm in width or grith, and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Fixing only chain link fening including line wires, any mesh, size type to any type of standards, rails,straining bolts, etc. including provission of binding wire all as specified and directed

Supply only chain link MS galvanised fencing, any size or type all as specified and directed

M & L Preparing new steel surfaces of any description, over 10cm in width or girth,and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified and directed.

M&L for Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete etc complete all as specified and directed

M&L PCC solid block masonry exc 10 cm in width in PCC (1:3:6) type C1 ( using 20mm graded stone agregate) built in cement mortar (1:6) all as specified and directed.

M&L Rendering 15 mm thick on fair face of brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement all as specified and directed.

S&F PVC (SWR) 110mm pipe type 'B' single socketed, in any length with laid in trenches all as specified and as directed.

M&L for Cutting holes in brick walls in exceeding one bricks but not execeeding two bricks for inserting holdfast and making good dismantled portion in Cement mortar 1:3 or Cement concrete 1:2:4 etc complete all as specified and directed

S&F collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as secficied, erected in position and securing runners with holdfasts and brackets complete all as specified and as directed

Removing excavated material(soil) to a distance exceeding 50 m but not exceeding 250 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed.

Returing, filling in , including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil all as specified and directed.

M&L Preparation of newly plastered wall surfaces and applying two coat of cement base paint over a coat of chalk white primer all as specified and directed.

M&L PCC (1:2:4) type B1 by using 20mm graded stone aggregate as in copings,benching cills ,bed plates ,kerbs,lintles upto 1.5 m length including form work, weathering,slightly rounded or chamferred angles and throating all as specified and directed

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in hard/dense soil all as specified and as directed.

M&L for Providing Plain cement concrete Type D2 1:4:8 (40mm graded stone aggregate) in sub base,flooring etc 100 mm thickcomplete all as specified and as directed.

M&L for broken stone or boullders Hardcore of gauge n exc.63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface all as specified and as directed.

M&L for 50 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor,pavings etc. Finished fair and even complete all as specified and as directed.

M&&L for Machine pressed precast concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of 60 mm thickness, M35 grade with Grey cement and pigments with interstices filled with sand and bedded with and including 25mm thick sand bed complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces to finished even and smooth without using extra cement all as specified and as directed.

Removing excavated material /soil to a distance exceeding 1.5 Km but not exc 5 Km, depositing where direcetd at a level not exceeding 1.5m above starting point all as specified and directed.

M & L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe 410-0 or FE 310-0 all as specified and directed

M&L for PCC 1:4:8 type D2 (using 40mm graded stone agg) 75mm thick as in floor sub base etc as specified and directed

M&L for plain cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) 75 mm thick as in hardstanding etc finished fair and even complete all as specified and as directed.

M & L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' for thickness of concrete 75 mm all as specified and directed

M&L for Precast reinforced cement concrete (1:3:6) type B-1, using 20 mm graded stone aggregate as in cover slabs (for manholes) Shelves etc set in cement mortar 1:6 complete all as specified and directed Note: Reinforcement shall be measured separately

S&F of Non-skid coloured ceramic tiles of 7 to 8mm thick,(Square/rectangular) area of each tiles exe 0.06 and n.exc 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including backing coat 10 mm thick laid over and including screed bed or bedding layer 15mm thick in CM (1:6) complete all as specified and directed

S&F of Glazed ceramic coloured tiles of size exc 0.06 and n. exc 0.11 sqm 7-8 mm thick in vertical surfaces of skirting,dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including backing coat 10 mm thick in CM (1:4) complete all as specified and directed

S & F 100 mm size MS butt hinges, medium weight, cold rolled complete all as specified and as directed.

S & F 150 mm size cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and as directed.

S & F 150 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed.

S & F 300 mm long mild steel sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

M & L for 1mm thick plain, black, mild steel sheeting in ridges, hips valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

Taking down cement plaster on brick or stone walls,etc including raking out joints, hacking for key scrubbing down with water, etc and removing debris off the premises all as specified and directed

M&L for granite of any type 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

Dismantling structural steel work including doors, gates, MS flats used as in wind tie etc but excluding framed truss etc all as specified and directed

S&F mild steel small articles work as in hold fasts, bands, straps, etc quality conforming to Fe-290 Gde-E-165 complete all as specified and directed

SCHEDULE A PART E/M S&F of MCB DB,,double door 8 way triple pole vertical type 415 volts 50 Hz AC supply suitable for 4 pole MCCB incomer, fixed to the existing wall (concealed/surface) after removing the existing un serviceable MCB DB and reconnecting the electrical connections and making good the disturbed surface of wall to perfectly match with the exsting wall complete all as specified and as directed. Note : MCCB will be measured and paid separately under relavant items.

S&F of MCCB 4 pole100 Amps, 16KA breaking capacity, 415Volts 3-phase supply complete all as specified and as directed.

S & F Sheet metal enclosure double door MCB DB SPN 8 way with 100 A rated bus bar & neutral link complete all as specified and directed by Engineer-in-Charge.

S & F MCB SPN of 240 volts, AC, 50 HZ of capacity 6 to 32A, 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge.

S&F MCB SP 6 to 32A 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring complete as specified with 1100volt grade 6sq.mm. (nominal area) single core FRLS Grade PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC conduit of suitable size with all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge.

Note : (I) Three runs of wire and one run of conduit with necessary accessories will be measured as one unit length.

(II) The wiring shall be done strictly by following proper colour coding as per IS standards

S&F of single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one number single pole MCB 20 Amps , 240 Volts complete all as specified and as directed.

M&L for Point wiring complete as specified with 1100volt grade 2.5sq.mm. (nominal area) single core FRLS Grade PVC insulated unsheathed cable multi-stranded copper conductor drawn through and surface type of rigid non-metallic PVC conduit suitable size, with all fittings including terminal boxes made out of MS sheet metal switch boxes with 3mm thick laminated bakelite sheet fixed on wall for housing of 15Amps Switch Socket Combination duly earthed with same size cable as for line conductors as used in the wiring above but green in colour as continuous earthing wire complete all as specified & directed

Note The wiring shall be done strictly by following proper colour coding as per IS

S&F Switch socket combination polycorbonate white 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm multistranded copper conductor wire with unsheathed, FRLS grade PVC insulated, single core with earth continuity conductor of 1.5 sqmm FRLS grade PVC insulated multistranded copper conductor and including rigid PVC conduit of suitable size but not less than 20mm dia. and all accessories fixed to the surface of the roof/ walls or in chases etc. including terminal boxes made out of MS sheet of thickness should be not lessthan 1.2mm thick for fixing of switches, fan regulators socket outlet etc along-with 3mm thick top laminated bakelite sheet for housing switches, etc complete all as specified and as directed for the following :-

(a) One light point controlled by one switch

(b) One ceiling / Exhaust fan point controlled by one switch

(c) One three pin socket 5 Amps independent

(d) One three pin socket 5 Amps plug point on same board

S & F switch socket combination 2 in 1, 5 Pin 5 Amps, multipurpose flush type, ISI marked complete all as specified and as directed.

S& F socket outlet 3/5 pin 5 Amp flush type ISI marked complete all as specified and as directed.

S & F switch piano flush type, single pole, one way, 5 Amps, 230 volts, ISI marked complete all as specified and as directed.

S&F surface mounting / wall mounted LED tube light fitting 1x18 to 20Wwatts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge.

S & F exhaust fan with louvers 300mm sweep metal body, single phase 240 Volts, AC 50 Hz and connecting up including louvers including making necessary opening on stone /brick masonry wall of suitable size, finishing it properly and making good with matching colour with the surroundings provision of cable 3 core of size 0.5 Sqmm (16/0.2 mm) from ceiling rose to fan complete all as specified and as directed.

S & F DB with sheet metal enclosure 240 volts, 2 way Single phase single door complete all as specified and as directed.

M&L for Sub Main wiring with 2 runs of FRLS grade 1100 volt unsheathed PVC insulated cable of single core 2.5sq mm (nominal area) multi-stranded copper conductor drawn through and including PVC conduit of suitable size (ISI marked) incl all specials like joint elbow, Tee, junction , bend etc and provision of one runs of FRLS grade 1100 V rated PVC insulated multistranded copper conductor single core 2.5sq mm for earth continuity all as directed.

Note (I): Necessary M.S junction boxes for inspection as required on site/directed by Engr-in-charge, shall deemed to be included in the quoted rate.

(II) Three runs of wire and one run of conduit with necessary accessories will be measured as one unit length.

(III) The wiring shall be done strictly by IS Standards.

S & F intergral aviation light having 302 nos LED comprising of aluminium housing polycarbonate body including GI Pipe light grade 25 mm for fixing aviation light not more than 2.5 Mtr length with necessary clamps, nut bolts, PCC grouting etc complete all as specified.

S&F surface /Wall mounted type LED track light 12 Watts of Luker Cat No LSPT 12 or equivalent complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

S & F DB with sheet metal enclosure 240 volts, 4 way Single phase double door with copper bus bar neutral link, earth link, earthing studs, without MCBs complete all as directed.

M&L for Sub Main wiring with 2 runs of FRLS grade 1100 volt unsheathed PVC insulated cable of single core 2.5sq mm (nominal area) multi-stranded copper conductor drawn through and including PVC Cassing and capping of suitable size (ISI marked) incl all specials like joint elbow, Tee, junction , bend etc and provision of one runs of FRLS grade 1100 V rated PVC insulated multistranded copper conductor single core 2.5sq mm for earth continuity all as directed.

Note (I): Necessary M.S junction boxes for inspection as required on site/directed by Engr-in-charge, shall deemed to be included in the quoted rate.

(II) Three runs of wire and one run of PVC Cassing and capping with necessary accessories will be measured as one unit length.

(III) The wiring shall be done strictly as per IS CODE.

M&L for Point wiring complete with 1.5 sqmm single core FRLS grade 1100 V PVC insulated unsheathed wire with multi stranded copper conductor drawn through in and including PVC cassing & capping and accessories ISI marked fixed surface on wall / ceiling/ roof etc and including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS ISI marked as earth continuity conductor including terminal boxes madeout of MS Sheet of thickness not less than 1.20 mm for fixing switches, fan regulators, socket outlet etc alongwith 3mm thick laminated bakelite sheet for housing switches etc, complete all as specified

(a) One fan point / light point controlled by one piano switch

(b) One 3/5 pin socket out let 5 amp on same board with other switches.

(c) One socket 5 amp on independent board.

M&L for Point wiring complete with 2.5 sqmm single core FRLS grade 1100 V PVC insulated unsheathed wire with multi stranded copper conductor drawn through in and including PVC cassing & capping and accessories ISI marked fixed surface on wall / ceiling/ roof etc and including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS ISI marked as earth continuity conductor including terminal boxes madeout of MS Sheet of thickness not less than 1.20 mm for fixing switches, fan regulators, socket outlet etc alongwith 3mm thick laminated bakelite sheet for housing switches etc, for 15 Amps socket outlets complete all as specified and directed

M & L for Ceiling rose, PVC/polycarbonate, insulated body, 3 terminals and 240 Volts ISI marked complete all as directed

S & F wall mounting fan 400 mm sweep with inbuilt speed regulatorwith remote control complete all as specifed and directed by Engineer-in-Charge.

S&F surface mounted LED panel 2x2 feet 40 watts including LED tubes complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply & fix ceiling fan with complete accessories 230 V, 1200 mm sweep BEE 5 star rated and connecting up including provision of cable from ceiling rose or connector to fan , GI clamp for hanging Of Celing fan ,nuts ,Bolts complete all as specifed and directed by Engineer-in-Charge. Make : Crompton Model No. HS Decora Plus - 5 Star or equivalent.

M&L for sub main wiring complete as specified with 1100volt grade 6sq.mm. (nominal area) single core FRLS Grade PVC insulated unsheathed cable multi-stranded copper conductor drawn through and rigid PVC Cassing & Caping suitable size with all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge.

Note (I): Necessary M.S junction boxes for inspection as required on site/directed by Engr-in-charge, shall deemed to be included in the quoted rate.

(II) Three runs of wire and one run ofCassing & Caping with necessary accessories will be measured as one unit length.

(III) The wiring shall be done strictly by As per IS

S & F stepped type electronic fan regulator flush type all as specified and as directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR all as specifed and as directed. Make : Voltas/Blue star/Carrier/LG/Hitachi/Godrej

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type, wall mounted & designed for input variation between 130 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% , load capacity 12 Amps and suitable capacity for 1.5Ton A/C, complete all as specifed and as directed. Make : V Guard/Aplab/Microtech/Andrew Yule/Sinetrac

Supply and fix air cooled split unit air conditioner electric driven single phase of capacity of 2 TR, BEE 5 star rated complete all as specifed and as directed. Make : VOLTAS Model No : 245VZZV or equivalent of Blue star/Carrier/LG/ Hitachi/Godrej

S & F refrigent copper pipes for suction and discharge lines for connection of indoor to outdoor units of 2.0 Ton split AC of standard size as per OEM recommendation with proper insulation including fixing arrangement with powder coated MS clamps and jointing of pipe etc., complete all as specified and as directed.

S&F modular type motor starter, 25 Amps for split type air conditioners 1.5/2.0 Ton including cover plate and PVC surface box of suitable type complete all as specified and directed.

M&L for rigid PVC conduit (medium grade) size 25 mm dia including fittings such as elbow, bend & tee etc. for water drain out line of AC, laid on walls/floors with clamping/fixing materials complete all as specified and directed.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor drawn through and including instove enamelled steel conduit consealed in stone / brick wall of suitable size but not less than 20mm dia, with all fittings, concealed including MS box of thickness not less than 1.2mm, for fixing of rotary switches and duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified & directed for :-

Note (i) : Necessary stove enamelled steel conduit junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with dummy plates shall deemed to be included in the quoted rate.

(ii) Same size wire shall be used for phase, neutral & earth conductor

(iii) The wiring shall be done strictly by AS PER IS CODE.

(iv) The quoted rates are deem to be inclusive of cutting chases in the stone/Brick masonry walls.

One light point controlled by one rotary switch

S & F switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed by Engineer-in-Charge.

S & F LED tube light fitting 1x20W flameproof type made of aluminium alloy LM6, with driver, bipin holders, connector block, etc. complete with all accessories prewired and including connecting up with 1.5Sqmm FRLS copper coductor complete all as specifed and directed by Engineer-in-Charge.

Supply & fix flame proof Exhaust fan 300 mm sweep complete with accessories 230 V, and connecting up including provision of cable from ceiling rose or connector to fan complete all as specifed and directed by Engineer-in-Charge.

M&L for Sub Main wiring PVC insulated cable 2runs of single core 6sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including instove enamelled steel conduit consealed in wall of suitable size with ISI marked incl all specials like joint elbow, Tee, junction, bend etc and provision of one run of PVC insulated copper conductor single core of same size for earth continuity complete all as specified and directed.

Note (i) : The wiring shall be done strictly as per IS Code.

(ii) The quoted rates are deem to be inclusive of cutting chases in the stone/Brick masonry walls.

S&F of MCB DB SPN 4way 240 Volts with copper bus bar & neutral link and earth bar and having double door type to be fixed in the wall by grouting including connections and making good the disturbed surface of wall to perfectly match with the exsting wall complete all as specified and as directed.

S & F Earthing display board made out of 3 mm thick MS sheet of size 300x200 duly welded with 500 mm long 25x25x6mm angle iron or Trangular size as per user requirment duly fixed near to the grid point with cement grouting including writing earthing details such as earth resistance, connected Eqpt ( Like- PS/LA/ Chemical Earthing ) etc complete all as specifed and directed.

S J REDDY

K LAKSHMAN SINGH AND CO

sri ram construction

M/s RAMA LAKSHMI CONSTRUCTIONS