REPAIR AND MAINT OF ROAD LIGHT, SECURITY AND OTHER CONNECTED WORKS UNDER GE (WEST) JABALPUR

Amount

Repair and maintenance of street light / perimeter light / security light / Garden lights/ flood light fitting HPSV/LED, any type/make installed on LT / HT poles, building, by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, re-assembling and re-fixing the fitting at its original location with proper alignment and making good all defects including replacing of nuts/bolts/PVC connections etc complete all as specified and as directed. Note :- Defective / worn out parts/ fittings shall be measured and paid for separately against relevant items of this BoQ as "supply only" .

Repair and maintenance of High mast light fitting any type/make installed on 12/15 mtr pole by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, reassembling and re-fixing the fitting at its original location with proper alignment and making good all defects by replacing nuts/bolts/PVC connection etc complete all as specified and directed. Note :- (i) Defective / worn out parts/ fittings measured and paid seperately against relevant items as "supply only".

Repair and maintenance of Mid mast light fitting/security light fitting any type/make installed on LT/HT/mid mast poles,by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, reassembling and re-fixing the fitting at its original location with proper alignment and making good all defects by replacing nuts/bolts/PVC connection etc complete all as specified and directed. Note :- (i) Defective / worn out parts/ fittings measured and paid seperately against relevant items as "supply only".

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

M&L for sand cushioning to underground cable providing with a layer 8 cm before laying and 15 cm after laying, jointing and testing the cable complete all as specified and as directed. Note: Punned thickness of sand shall be measured.

Supply and laying the Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and as directed.

M/L for Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

M/L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Supply, fixing and connecting in repair PVC insulated, round,sheathed, multicore, industrial flexible cable with bright annealed copper conductor, 1100 volts grade cable of size1.5 sqmm, 3 core, confirming to IS 694-1990 complete all as specified and directed

Supply, fixing and connecting in repair LED street light fitting 45 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK08 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >120lm/W,CRI >70%, THD<10%, complete all as specified and as directed.

Supply, fixing and connecting in repair LED street light fitting 60 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >120lm/W,CRI >70%, THD<10%, complete all as specified and as directed.

Supply, fixing and connecting in repair LED street light fitting 70 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >120lm/W,CRI >70%, THD<10%, complete all as specified and as directed.

Supply, fixing and connecting in repair LED street light fitting 90 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >120lm/W,CRI >70%, THD<10%, complete all as specified and as directed.

Supply, fixing and connecting in repair LED street light fitting 120 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >120lm/W,CRI >70%, THD<10%, complete all as specified and as directed.

Supply, fixing and connecting in repair LED flood lights, 100 watt, having high power LED and unique flood optics to enusre uniform distribution system, colour temperature cool white (5700K), system efficay >120 lm/watt, pressure die cast aluminium housing, integrated electronic driver, IP-66, Class I ccomplete all as specified and as directed.

Supply, fixing and connecting in repair LED flood lights, 150 watt, having high power LED and unique flood optics to enusre uniform distribution system, colour temperature cool white (5700K), system efficay >120 lm/watt, pressure die cast aluminium housing, integrated electronic driver, IP-66, Class I complete all as specified and as directed.

Supply, fixing and connecting in repair LED flood lights, 200 watt, having high power LED and unique flood optics to enusre uniform distribution system, colour temperature cool white (5700K), system efficay >120 lm/watt, pressure die cast aluminium housing, integrated electronic driver, IP-66, Class I complete all as specified and as directed.

Supply, fixing and connecting in repair LED flood lights, 300 watt, having high power LED and unique flood optics to enusre uniform distribution system, colour temperature cool white (5700K), system efficay >120 lm/watt, pressure die cast aluminium housing, integrated electronic driver, IP-66, Class I complete all as specified and as directed.

Supply, fixing and connecting in repair LED flood lights, 400 watt, having high power LED and unique flood optics to enusre uniform distribution system, colour temperature cool white (5700K), system efficay >120 lm/watt, pressure die cast aluminium housing, integrated electronic driver, IP-66, Class I complete all as specified and as directed.

Supply, fixing, connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall mounted hensel enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-66, The circuit should be suitable enough to take 8 KW single phase load with contactor 63 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 63 Amps conforming to IEC-60898/IS-8828 and circuit wiring of minimum 16sqmm coper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts complete incl taking down of existing arrangement complete all as specified and as directed.

Dismantling/ taking down of existing street light switching system and Supply, fixing, connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall mounted hensel enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-66, The circuit should be suitable enough to take 15 KW Three phase load with contactor 32 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 32 Amps per phase conforming to IEC-60898/IS-8828 and circuit wiring of minimum 10sqmm copper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts complete all as specified and as directed.

Supply, laying or fixing or passing through pipe commissioning and testing of XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 10 SQMM 2 CORE including suitable size lugs including taking out /dismantling of existing cable complete all as specified and as directed.. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items.

Supply, laying or fixing or passing through pipe commissioning and testing of XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 10 SQMM 4 CORE including suitable size lugs including taking out /dismantling of existing cable complete all as specified and as directed.. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items.

Supply, laying or fixing or passing through pipe commissioning and testing of XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 16 SQMM 4 CORE including suitable size lugs including taking out /dismantling of existing cable complete all as specified and as directed.. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items.

Supply, laying or fixing or passing through pipe commissioning and testing of XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 25 SQMM 4 CORE including suitable size lugs including taking out /dismantling of existing cable complete all as specified and as directed.. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant item.

Trimming of tree branches Clearing of LT/HT line 4 mtr all around by cutting tree branches at ground level of any numbers and any girth on any numbers of conductors/earth wire complete all as specified and as directed.

Supply and fix junction box made out of polycarbonate with IP 55/IP 65 protection of size 200 x 160 x 98 mm, 5 way having terminals for termination of cable with necessary nuts and bolts ,Make - Hansal including -02 Nos polycarbonate cable gland Make :Hansal, 01 Nos DIN rail for mounting of MCB and 01 No, MCB SP, 10 KA, 6 Amps Make - Legrand in and including fixing clamp of FI 50 x 6mm with necessary nuts and bolts complete in and including taking down of existing u/s junction box of any type complete all as specified and as directed.

S&F in replacement 3 Layer PPR Pipes, UV stabilised having thermal stability upto 93 degree centrigrade complete and fixed with the pole by providing FI clamps, nuts and bolts of size 25x25x3mm with nuts & bolts for protection of connecting wires, connection from junction box to light fittings, complete for outer dia 20 mm (PN-16) complete all as specified and as directed.

Material and labour for painting to steel tubular pole/Rail Pole of HT/ LT over head line and all MS clamps, cross arm work on poles with one coat of superior aluminium paint including necessary preparation of surfaces and painting of alternate strip with black and yellow/red synthetic enamelled paint strip 05 Nos each of 30 cm height up to 1.5mtr above PCC benching/coping complete all as specified and as directed.

Material and labour for painting to PCC pole of HT/ LT over head line and all MS clamps, cross arm work on poles and applying Two Coats of Exterior Emulsion paint (weather coat) including necessary preparation of surfaces and painting of alternate strip with black and yellow synthetic enamelled paint strip 05 Nos each of 30 cm height up to 1.5mtr above PCC benching/coping complete all as specified and as directed.

Supply, laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps etc.of size 50 mm outer dia and 38 mm inner dia complete all as specified and as directed..

S&F, in replacement, GI pipe bracket, made out of GI pipe 40mm dia light grade 1.5mtr long bent to the shape 120 degrees angle all as per site requirement including MS clamps made of FI 50x6mm complete with nuts, bolts & washer as per requirement for mounting fittings complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq.mm 2 core nominal cross section in service connections complete all as specified and as directed.

M&L for GI Tubes in repair of following size, medium grade ,galvanised , with clamp of 25x3 flat iron welded to pipe fixed to wall/pole/ceiling or laid in floors or under road etc complete all as specified and as directed.

(a) 40 mm bore

(b) 50 mm bore

M&L in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Supply & Fixing driver suitable for 25-45 Watt existing LED Street light fitting complete all as specified & directed.

Supply & Fixing LED Driver suitable for 60-90 Watt existing LED Street light fitting complete all as specified & directed.

Supply & Fixing LED driver suitable for 90-120 Watt existing LED Street light fitting complete all as specified & directed.

Supply & Fixing LED driver suitable for 150-400 Watt existing LED Street light fitting complete all as specified & directed.

S&F contactor three phase 32 A, Thermal Overload relay suitable for street light operation complete all as specified & directed.

S&F contactor single phase 32 A, Thermal Overload relay suitable for street light operation complete all as specified & directed.

titiksha india (BID ID -3452002)

Haryana EngineerService (BID ID -3451940)

MAA SHARDA CONSTRUCTION (BID ID -3458467)

RAVINDRA ELECTRICAL (BID ID -3457661)

Suchit constructions (BID ID -3457640)

M/s Ajayshwar Singh Rana (BID ID -3458288)