GE 861 EWS-77(T)/2025-26

Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided for and including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) complete all as specified and as directed by Engineer-in-charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.

Dismantling wall and ceiling boards (fibre, Pulp, insulation etc) or insulation board/slabs/blankets, any thickness, including cover fillets & snap grid frame etc, complete all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting , any gauge and thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work / stone masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters of PVC door wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar, complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster from brick wall or concrete surfaces etc including racking out joints, hacking for key & scrubbing down with water etc including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) complete all as specified and as directed by Engineer-in-charge.

Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering 15mm thick in Cement Mortar 1:6 , on fair faces of brick work or concrete surfaces of walls , finish even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 5mm thick in Cement Mortar 1:3 , on concrete surfaces of ceiling , finish even & smooth complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Rendering 15mm thick in Cement Mortar 1:4 using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces of wall finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:- Liquid Water proofing compound shall be measured and paid separately under appropriate item of Schedule'A' BoQ..

Material & Labour for Rendering 15mm thick in Cement Mortar 1:6 using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces of wall finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:- Liquid Water proofing compound shall be measured and paid separately under appropriate item of Schedule'A' BoQ.

Supplied only Liqud water Proofing Compound

Material & Labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over with and including one coat of alkali resistance primar complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over with and including one coat of alkali-resistant priming coat complete all as specified and directed by Engineer -in-charge.

Material & Labour for Preparation of new plastered surfaces applying three coat of white wash on ceiling surface complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Glazed ceramic coloured tiles size 400mm x 400mm , 10mm thick, laid as in floors set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Glazed ceramic coloured tiles size 450mm x 300mm x 7mm thick , as in verticle surface , set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Material & Labour for joint free Non skid coloured ceramic tiles 600mm x 600mm x 7 to 8 mm thick laid as in floors set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Material & Labour for joint free Non skid coloured ceramic tiles 600mm x 600mm ,6 to 7 mm thick as in vertical surfaces as in verticle surface , set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Chequerd Cement Concrete tiles glossy finished of size 30cm x 30cm x 25mm thick with grey cement and pigment , set , jointed and pointed in neat cement slurry @ 3.00Kg /Sqm as in floors , laid over with and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 50mm thick Plain Cement Concrete 1:3:6, type C-2, using 40mm graded stone aggregate, , as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels not .exceeding . 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays, with and including form work all as specified and directed by Engineer-in-Charge. Note:- The rate of form work is included in this item and nothing shall be paid extra on this account ..

Material and labour for 75 mm thick PCC (1:3:6) Type C-2 using 40mm graded stone aggregate as in flooring, hard standing, plinth protection / path etc. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Material & Labour for 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone aggregate) as in sub-floor, sub-base, floor and pavings, etc., complete all as specified and directed by Engineer-in-Charge.

Material & Labour for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in sides of rounded or chamfered on edges of interlocking tiles / chequered tiles including necessary formwork, complete all as specified and directed.

Material & Labour for Precast cement concrete type 1: 2: 4, type-B1 (using 20 mm graded crushed stone aggregate) as in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set and jointed in CM 1:4, complete all as specified and directed by Engineer-in-charge..

Material & Labour for PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in lintel upto 1.5m clear span, cills, steps; seismic and other similar bends, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and thelikeincluding weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.

Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area exceeding 03 Sqcm but not exceeding 6 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.

Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area not exceeding 03 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.

Material & Labour 6mm thick plywood, grade BWR, Type BB, fixed in ceiling with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.

Material & Labour in replacement weather boarding in 2nd class hardwood ,clean swan , plain , 20 mm thick or feather edges , 15 mm to 20 mm thick and fixed with 30 mm laps joints complete all as specified and directed by Engineer-in-Charge.

Material & Labour for plywood, 9mm thick veneered decorative plywood, grade 1 (with BWR resin) with one side decorative face fixed in ceiling, flat or sloping, fixed with screwscomplete all as specified and directed.

Supply & Fixing second class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Factory made 35mm thick framed, panelled shutter (two panel) with lock rail made of 2nd class Hard wood and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge. Note: Butt Hinges, Tower bolts, Handles , sliding door bolts and painting shall be measured and paid seperately under appropriate items of schedule 'A' BoQ.

Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (as approved by Engineer-in-charge) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- (i)Wire gauze / glass shall be measured and paid separately under appropriate items of Schedule 'A' BoQ. (ii) Butt Hinges, Tower bolts, Handles , sliding door bolts , ordinary rat tail pattern springs and painting shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. (iii) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. (iv)Primer shall be measured paid separately under appropriate item of BOQ.

Supply and Fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Factory made 30mm thick PVC door shutter with and including 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back face complete all as specified and directed by Engineer-in-Charge. Note: Butt Hinges, Tower bolts, Handles , sliding door bolts and painting shall be measured and paid seperately under appropriate items of schedule 'A' BoQ.

Supply and Fixing 75mm long, mild steel cold rolled butt hinges, medium weight,ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 100mm long, mild steel cold rolled butt hinges, medium weight,ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 100 mm long mild steel barrel tower bolts, ISI Marked,stove enamelled black, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 150 mm long mild steel barrel tower bolts, ISI marked stove enamelled black, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 200 mm long mild steel barrel tower bolts, ISI marked stove enamelled black, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 75mm long, mild steel pressed handles, oval type, (ISI Marked ) stove enameled black, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 150mm long, mild steel pressed handles,ISI Marked, oval type, stove enamelled black, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 150mm long(D type) aluminium anodised haldles or extruded section (ISI marked) complete all as specified and directed.

Supply and Fixing 250mm long mild steel sliding door bolts, ISI Marked plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 300mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections (ISI marked) and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

Supply & Fixing in replacement Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white (minimum), with grating and union for discharge pipe with and including 32mm bore PVC waste pipe complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement Stainless steel Grating doom 100m dia complete all as specified and as directed by Engineer-in-charge.

Supply & Fixing in replacement vitreous china squatting pan water closet, orissa pattern, size 580mm x 440mm , white with integral foot rests , with and including PVC (SWR) 'P' trap, jointing to flush pipe complete and making good to floor in cement concrete M-5 (1:5;10), type E-2 using 40mm graded stone aggregate, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement vitreous china wash hand basins size 450mm x 300 mm ovel type with Mild steel brackets, with and including cutting for and pinning in ends of brackets or erecting stand, with and including waste fittings of brass chromium plated ,with and including 32mm dia PVC waste pipe of required length complete all as specified and directed. as directed by Engineer-in-Charge.

Supply and Fixing in replacement 15mm bore Pillar tap fancy type Chromium Plated , (ISI marked) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 15mm bore and connection complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 20mm bore and connection complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 15mm bore GI tubing medium grade with all new fittings to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 20mm bore GI tubing medium grade with all new fittings to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Fixing only 15mm bore GI tubing medium grade after throughly cleaning of pipe retrived from serial item no.65.00 here-in- before with all new fittings fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. Note: The rate of cleaning of old servicable pipe is included in this item and nothing shall be paid extra on this account.

Fixing only 20mm bore GI tubing medium grade after throughly cleaning of pipe retrived from serial item no.66.00 here-in- before with all new fittings fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. Note: The rate of cleaning of old servicable pipe is included in this item and nothing shall be paid extra on this account.

Supply & Fixing in replacement 15mm bore bib tap, chromium plated, fancy type, (ISI marked) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement 15 mm bore stop valve / angle valve, Chromium Plated, (ISI marked) cast copper alloy (ISI marked) screwed down , high pressure with crutch or butterfly handle fancy type complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Preparation of new wooden surfaces of any description not otherwise described, exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over with and including one coat of pink primer, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint over complete all as specified.

Supply & Fixing in replacement 75mm PVC(SWR) vent cowl (ISI Marked) complete all as specified and directed by Engineer -in-charge..

Supply & Fixing in replacement 110mm PVC(SWR) vent cowl (ISI Marked) complete all as specified and directed by Engineer -in-charge..

Supply & fixing in replacement Rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position with and including Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in-charge. Note: The rate of 20mm bore ball valves, high pressure of PTMT is included in this iterm and nothing shall be paid extra on this account.

Supply & fixing in replacement brass hat and coat hook ,solid body 175 mm to 250mm complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement 125mm size brass chromium plated shower rose with swivel joints, any size including fixing to steel pipe of 15mm dia or union, fixedr complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing in replacement Brass Chromium Plated tubular towel rail, 20mm dia, D type, 60cm long between flanges and bracket complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement chromium plated stainless steel soap tray of approx size 150 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement Corner glass shelf 300mm Cat No-BEA-44 complete all as manufacturers instructions

Supply and Fixing in replacement Bathroom Cabinet made out of PVC / ABS type plastic of size 45cm x 60cm , compete all as specified and as directed by Engineer-in-charge.

Material & Labour for 3 mm thick figured glass pin headed type and glazing with oil putty or fixed with bead/glazing pins in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Material & Labour for disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position.(cleaning repairing etc. measured separately including cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc, complete all as specified and directed by the Engineer-in-Charge

Supply & Fixing Mild steel work as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully aluminum / copper point wiring on Teak Wood Batten / in conduit / with conduit / in casing and capping(light /Fan / socket or power) complete with and including taking down fittings such as switches, ceiling roses, pendants, Regulators, sockets, light fittings etc complete all as specified and directed by Engineer-in-Charge. Notes: (i) The weight of aluminium scrap, copper scrap and scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. (ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item nos.89.00 to 92.00 of BoQ.

Material and labour for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with 1.5 Sqmm two single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade ISI Marked , with and including PVC casing and capping of medium grade of suitable size and run on wall / surface with all fittings (ISI Marked) with and including one single core 1.5 Sqmm FRLSH PVC insulated multi strand copper conductor cable 1100 volt grade (ISI marked ) (as in green colour) as continues earth wire connected to earth dolly etc. controlled by one switch for one light point/ fan point with and including CI/MS/ wooden sunk box of required size with and including 3mm thick plastic laminated sheet cover & as directed by Engineer- in- Charge including cutting, chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engineer-in-Charge. Notes for serial item nos.89.00 to 92.00 : (i) switches one way 5 /6 Amp , switches one way 15 /16 Amp, socket out lets 5 /6 Amp & socket out lets 15 1/6 Amp , switch socket combination 5Amp/ 15Amp Fan regulator shall be measured and paid seperately under respective items of Schedule'A' BoQ. (ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account.

All as per srl item No.89.00 here- in- before but for One 3 pin socket outlet, 5 Amps, on same board complete all as specified and directed by Engineer-in-Charge.

All as per srl item No.89.00 here- in- before but for One 3 pin socket outlet, 5 Amps, independent board complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 89.00 of BoQ here-in-before but 2.5 Sqmm two single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade ISI Marked with and including one single core 2.5 Sqmm FRLSH PVC insulated multi strand copper conductor cable 1100 volt grade (ISI marked ) as continues earth wire connected to earth dolly etc for 3 pin socket outlet 15 Amps with complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Switch piano flush type 5 Amp single pole one way ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt (ISI Marked ) complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal 240 volt (ISI Marked )complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Fan step regulator, 120W - 2 module type electronic fan regulator, duly(ISI Marked ) with and including connector complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface bakelite 65mm x 50mm three terminals ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Lamp holder (Angular/Straight )ISI marked , insulated body , with back plate for batten fittings complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing LED Lamp 9Watt ,230 Volt, AC Supply,, Energy efficien, long life complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in replacement Decorative ultra slim linear LED 20 Watt 4 Feet Long lighting fixture with extruded aluminium heat sink,environment friendly, Energy efficient , ready to use pack with and including LED Tube complete , with inbuilt electronic driver, PCB, Connector block complete all as per manufactureres instructions with and including connecting up with theree copper flexible cable from ceiling rose to fitting including connectiong up and fixed on with and including two nos.square box of required size complete all as specified and directed by Engineer-in-charge. Notes: (a) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :- (i) Manufacturing defects. (ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13. (c) Scope of work shall include LED fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account.

Supply and fixing in replacement sheet metal enclosure made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 4 way 240 V AC with 200 Amp rated copper bus bar, Double Door,08 modules, dust and vermin proof suitable for incorporation of MCBs / MCCBs/ Isolators etc.conforming to IS/IEC-61439-2:2011, BS-5484 complete all as specified and directed by Engineer-in-charge. Notes: (i)MCBs / MCCBs/ Isolators shall be measured and paid seperately under appropriate items. (ii) The rate of 200 Amps copper bus bar is included in this item and nothing shall be paid extra on this account.

Supply and fixing in replacement sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 8 way 230 V AC with 200 Amp rated copper bus bar, Double Door,08 modules, dust and vermin proof suitable for incorporation of MCBs / MCCBs/ Isolators etc.conforming to IS/IEC-61439-2:2011, BS-5484 complete all as specified and directed by Engineer-in-charge. Notes: (i)MCBs / MCCBs/ Isolators shall be measured and paid seperately under appropriate items. (ii) The rate of 200 Amps copper bus bar is included in this item and nothing shall be paid extra on this account.

Supply and fixing MCB SP 6 to 32 Amps, 230 volts , AC supply , rupturing capacity not less than 10KA,' C' Curve ,ISI Marked, with and including necessary attachment , thimbles etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing MCB SPN 32 Amp , rupturing capacity not less than 10 KA 'C' curve 230 V AC, 50 Hz ,ISI Marked, with and including necessary attachment , thimbles etc. complete all as specified and directed by Engineer-in-charge.

Material and Labour for in replacement earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia medium grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Supply & Fixing Exhaust fan 300 mm sweep , made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in replacement service cable 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an nner sheathing of PVC tape and overall PVC sheathed of nominal cross sectional area 10 Sqmm x 2.00 core complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing service cable 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an nner sheathing of PVC tape and overall PVC sheathed of nominal cross sectional area 16 Sqmm x 2.00 core complete all as specified and as directed by Engineer-in-charge.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable , Pipes , etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil such as soft /loose /Hard /dense soil complete all as specified and as directed by Engineer-in- charge.

Returning filling in, approved soft/loose soil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in any type of soil complete all as specified and as directed by Engineer-in- charge.

Removing excavated material of any type of soil not exceeding 50m and depositing where directedc at a level n exc 1.5 mtr above the starting point complete all as specified and directed by Engr- in- charge.

Supply & Fixing in replacement 20mm bore GI tubing medium grade with all new fittings laid in trenches complete all as specified and directed by Engineer-in-Charge. Note: Excavation and earth work shall be measured and paid seperately under appropriate items of schedule 'A' BoQ.

Supply and fixing in replacement 20mm bore Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for iron pipes complete all as specified and as directed by Engineer-in-charge.

Material and Labour for Cutting of existing CI / GI pipe line of 20mm to 50mm bore and inserting with and including NEW TEE of appropriate size and taping new connection with all accessories complete all as specified and as directed by Engineer-in-charge. Note: The rate of supply and fixing of NEW TEE of appropriate size is included in this item.Hence bidder shall be quoted his rates accordingly and nothing shall be paid extra on this account.

Please Enable Macros to View BoQ information