REPAIR/MAINT OF CERTAIN JOINERY, OTHER WORKS OF OTM AND MD ACCN INCLUDING MISC REPAIR WORKS OF WATER PROOFING TREATMENT, ROOF SHEETS RELATED TO PREMONSOON MAINT WORKS IN AGE B/R-I AREA UNDER GE SAUGOR

Amount

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (with out taking off shutters from the frames) exc 1.50 Sqm but not exc 4 Sqm each including removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

M&L for second class hardwood plain, solid, straight chowkhat and frames wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints complete all as specified and directed

M&L for 35 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed

M&L for 30 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 35 mm thick second class hard wood plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F aluminium windows sliding type three track powder coated consisting of frame 91.80 mm x 45 mm, shutters 39 mm x 18 mm with rollers and locking arrangements with 4 mm thick tinted glass with rubber gasket and aluminium beading , aluminium handle, aluminium grill type 'A' with fixing arrangement (wt. of grill not less than 2.05 kg/sqm), stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40 mm including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed ( Note:- Aluminium section thickness 1.50 mm }

S&F aluminium powder coated door frame and shutter with frame section 100mm x 44.45mm x 2 mm, vertical, top and lock rail 50mm x 44.50mm x 1.50mm and bottom rail 100mm x 44.50mm x 1.85 mm including 12mm thick Laminated PVC board or 5.5 mm thick tinted glass as approved by Engr-in-charge on top and bottom portion with necessary rubber gasket and alumium beading and cleats etc, aluminium handles - 02 Nos (ISI Mark) with locking arrangements with 4 Nos 125 mm long SS butt hinges, complete all as specified and directed.

S&F powder coated aluminium ventilators partially fixed and partially openable either top hung or side hung and bottom portion fixed having 4mm thick frosted glass and top portion having two shutters external shutter with 4mm thick frosted glass and interal shutter having stainless steel wiremesh 0.36mm dia for Bath / WC including rubber gasket and alumium beading with necessary cleats / locking arrangement complete all as per standard engineering practice including necessary cutting holes on wall and floor complete all as specified and directed (Note:-Aluminium section weighing not less than 0.55kg/m)

Repairing of aluminium door of size exc 1.5 Sqm but not exc 4.0 Sqm and make serviceable by replacing of un serviceable Butt hinges , Tower bolts, Handles ,double action floor spring, locking arrangement, aluminium beading etc complete all as directed and up to the satisfaction of Engr-in-Charge. Note: double action floor spring shall be measured and paid in respective items.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

S&F 3mm thick Sheet glass ordinary quality /frosted on side fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane , complete all as specified and directed

S&F 3mm thick Sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane including hacking out old broken glasses (any thickness size qualityor description) from wdn frames or fixed with beads complete all as specified and directed

S&F 4mm thick Figured glass pin head type fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane including hacking out old broken glasses (any thickness size qualityor description) from wdn frames or fixed with beads complete all as specified and directed

S&F glazed 12mm thick toughened glass with frosted film as in door, including Stainless Steel handles not less than 200mm long-02 Nos, Floor door spring capable to bear the load/movement of toughened glass door and suitable locking arrangement locks and all necessary fittings ccomplete all as specified and directed

S&F factory made PVC door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm Prelam PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back incl 3 Nos 100 mm stainless steel butt hinges in each shutter complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed

M&L for PCC 1:3:6 type C-1( using 20mm graded stone aggregates) as in bed blocks for hold fast etc including cutting holes exc half brick but not exc one brick in brick walls built in cement mortar in brick or stone walls built in lime mortor. complete all as specified and directed.

S&F MS butt hinges 100 mm size medium weight, coled rolled and fixed with screws complete all as specified and directed

S&F 200mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 150 mm fixed with steel screws complete all as specified and directed

S&F 250mm long Aluminium alloy anodised Sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified and directed

S&F mild steel 150 mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

S&F double action floor spring hydraulically regulated,made up of min 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified.

S&F in repairs door closer hydraulically regulated, aluminium body, designation No. 3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed.

S&F in repair 25 mm bore stainless steel pipe curtain rod including stainless steel brackets & decorative dome, suitable for door/widows curtain with fancy type powder coated ms dooms with ss brackets fitted to each end and fixed to wall complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of brick masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

Taking down cement plaster from brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and removing of rubbish off the premises complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 brick work / Concrete / Stone surfaces finishing the surfaces fair and even complete all as specified and directed

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxideZinc chromate primer of surfaces over 10cm width or girth complete all as specified and directed

M&L for prepration of newly plastered wall surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of distemper oil emulsion over a coat of wall primer incl. preparation of surfaces of walls etc complete all as specified & directed.

Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed/unframed complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Taking down and re-fixing asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts with GI & bitumenous washer including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.

S&F pre- coated coloured galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws.ncluding dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed.

S&F 0.5 mm thick galvalume sheet pre-coated coloured for ridge or fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws complete all as specified & directed.including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets as ridge complete all as specified and directed.

S&F structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F structural steel Fe 410-W, (Gde-E250 quality-A) work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc., complete all as specified and directed.

S&F MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.

M&L for suspended false ceilling comprising of 4mm thick non asbestos fibre cement bulding boards of size 595mmx595mm, fixed or laid/inserted to powder coated GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 4mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long incl dismantling of any type or ceiling boards in thickness with cover fillets complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in cement mortar 1:6 including demolition of stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work / concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed

M&L for prepration of new wall surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making 'V' shaped crakes and filling of all crackes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls complete all as specified and directed

Disconnecting existing tanks exc 250 but not exc 500 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning removing all scale and dirt etc from tanks and mouth of circulating pipes, etc. and hositing, reconnecting and re-fixing in position complete all as specified and directed.

Disconnecting existing tanks exc 500ltrs but not exc 1000 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning removing all scale and dirt etc from tanks and mouth of circulating pipes, etc. and hositing, reconnecting and re-fixing in position complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks capacity 500 litres (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in replacement GI tubing 15mm bore, medium grade with all GI fittings and fixed complete to wall & ceiling or laid in floor complete all as specified and directed.

S&F in replacement GI tubing 20mm bore, medium grade with all GI fittings and fixed complete to wall & ceiling or laid in floor complete all as specified and directed.

Taking down and re-fixing old GI steel tubing of 15mm bore and connections in new or old position (walls, ceiling, floor etc) including necessary cleaning or rerunning the old screw threads complete all as specified and directed.

Taking down and re-fixing old GI steel tubing of 20mm bore and connections in new or old position (walls, ceiling, floor etc) including necessary cleaning or rerunning the old screw threads complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed rain water pipe in any length with rubber ring joints fixed to walls with and including suitable mild steel clamps complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m m height complete all as specified and directed. .

M&L for PCC ( 1: 2:4), type B-1 (using 20 mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope,and roof kerbs,or mud stops, rounded or chambered on edges etc finished the surface even and fair without using extra cement, complete all as specified and directed .

M&L for 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm . The height of the roof may upto 9 m comprising with following items complete all as specified and directed:-

(i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. (ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (iv) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3 Kg / sqm composed of 100 micron (±10% ) high density polyethylene sheet (HMHDPE) as center core, which is sandwitched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps100 mm as per manufacture instruction etc. (v) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (vi) M&L for applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed

M&L for cement concrete tiles of size 25cm x 25cmx 22 mm thick, machine pressed, set jointed and pointed with neat cement slurry on roof and cut laid over and including 15 mm thick screed bedding in cement mortar (1:4) complete all as specified and directed

M&L for rendering 15 mmthick in cement mortar 1:4 on fair faces of brickwork or concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls all as specified and direcrted.

Supply only integral water proofing compound completeall as specified and directed.

M&L for applying two coats of elastomeric-acrylic waterproof protective cum decorative coating on external surface of RCC, concrete panels, plastered surface of wall etc. over a coat of primer including preparation of surfaces all as per manufactures instructions complete all as specified and directed.. Make: Dr Fixit (Raincoat) or equivalent make as specified in Appx 'C' of Particular Specifications

M&L for applying evenly a coat of blown type bitumen 85/25 at the rate of 1.50 kg per square metre over a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm over roof surfaces including preparation of old surface complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope,and roof kerbs,or mud stops, rounded or chambered on edges etc finished the surface even and fair without using extra cement,including demolation of cement concrete in any description and in any position complete all as specified and directed .

M&L for 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified (Note : WPC shall be measured and paid separately)

Pandey Construction and Engrs

dipangashu barick and associates

SAGAR MOTOR AND TRACTOR CO

maharaja construction and suppliers