8246 REPAIR TO FLOORING, WALL PLASTERING, CEILLING ETC IN CERTAIN BLDGS IN AREAS OF ASI, 13 FD SUB, HQ 3 SIG, 25 ADU, AFSMC, TA BN HQ UNDER GE (C) PUNE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish outside of MOD Land complete all as direted.

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing u/s tiles and rubbish off the premises complete all as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises complete all as directed.

Dismantling AC sheet corrugated or semi corrugated in roof covering and removing from site of work complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any guage, thickness in roof covering and removing from site of work complete all as directed.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area n exc 1.5 sqm each and removing from site of work complete including making good disturbed portion of jambs with PCC (1:3:6) type C1 using 20 mm graded aggregate as directed.

All as per item No 6 here-in-before but area exc 1.5 sqm and n exc 4.00 sqm each.

Taking down shutters area exc 1 Sqm but n exc 2.0 sqm each and removing from stie of work complete all as directed.

Taking down Shutters of any description n exc 1 sq. m each and refixing in the same opening after carrying out necessary adjusting / minor repairs etc all as directed

All as per item No 9 here-in-before but area exc 1.0 sqm and n exc 2.0 sqm each

Taking down chowkat or frame n exc 1.5 Sqm each and removing from site of work including making good disturbed portion of jambs with PCC (1:3:6) type C1, using 20 mm graded aggregate all as directed.

All as per item No 11 here-in-before but area exc 1.5 but not exc 4.00 sqm each.

Taking up or down 15 mm bore steel water tubing and connection including removal from site complete all as directed.

All as per item No 13 here-in-before but 20 mm bore tubing.

Supply and fix factory made plain framed panelled shutters (two panel ) 35mm thick 2nd class hardwood with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS: 103 ( Part -I) kiln seasoned and chemically pressure treated. complete fixed to chowkats all as specified and directed.

Supply and fix 30mm thick flush shutters, solid core construction, with particle board and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

Supply and fix factory Made 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass guage etc complete all as specified and directed.

Supply and fix factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

S&F factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as specified and directed.

S&F stainless steel butt hinges 100mm, medium weight complete all as specified and directed.

S & F Aluminium anodised powder coated barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F 150 mm long extruded aluminium alloy powder coated handles ,fabricated type complete all as specified and directed.

Supply and fixed in repairs for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed.

Supply and fixed in repair 300 mm long ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

S & F in repair aluminium anodised powder coated curtain rails 25mm dia with SS brakcet, knobs, rings @ 10cm c/c etc complete all as specified and directed.

Supply & fix in repair aluminium alloy anodised sliding door bolts with hasp and stapple (bolt type and fxing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long all as specified and directed

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed.

All as per item no 27 here-in-before but including taking down old u/s steel wire cloth.

S&F anodised powder coated window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/Mtr etc complete with necessary hardware i.e. locking mechanism, handle and 4.8mm thick selcted quality glass for glazing and stainless steel wire cloth 0.36 mm dia with width of aperture 1.40 mm including necessary gasket / neoprene / rubber packing / beading etc all as specified and directed

S&F aluminium anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works of Gde Fe-290 Gde E-165 including welding etc all as specified and directed.

S&F 125x60 mm size pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one shop coat of red oxie primer including filling the inner core of frames with PCC (1:3:6) type C1 using 20 mm graded aggregate complete all as specified and directed.

All as per item No 32 here-in-before but of size 105x60 mm.

M&L for 7 mm thick one side laminated PVC ceiling board for false ceiling on and including aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete including taking down old u/s ceiling board all as directed and specified

M & L Seamless calcium silicate 12mm thk ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish over and including GI framework for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flangs of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylong sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flangs of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (n exc 1.2 metre length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c including 6 mm dia GI (upto 1200 mm) hanger adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5 mm dia 40 mm long and finilsing the ceiling with two coats of oil bound distemper over a coat of primer complete including taking down old u/s ceiling board all specified and directed.

Supply and fix vertical venetion blinds 100 louver width quality of approved make fabric made of 100 % polyster woven fabric thickness 0.4 mm width of acralic coating resistance to cracking and fraying and treaed for dust repellency , vertually maintance free having plastic bottom chain thickness of 0.5 mm and dia 3 mm plastic with metal bottom weight 116.2 mm x48.30 mm and suitable coating on exteriaor including all fixures and fitting complete in all respect as design/colour/shade including requisite istallation bracket etc as required for installation at site with anchoring arrengement including taking down old unserviceble blind complete all as specifed as directed

M&L for 50 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregate as in plinth protection and paving and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick levelling course in cement concrete type D-2 1:4:8 using 40mm graded aggregate complete all as specified and directed.

M&L for 50mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete all as specified and directed.

M&L for 25mm thick levelling course in cement concrete type B-0 1:2:4 using 12.5 mm graded aggregate complete all as specified and directed.

M & L for Vitrified ceramic tiles Light shade 10mm thick (square /rectangular ) polished , area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed.

All as per item No 41 here-in-before but in skirting / vertical surfaces over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 43 here-in-before but area of each tile exc 0.18 Sqm but n exc 0.38 Sqm.

M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat in CM 1:3 complete all as specified.

M&L for glossy finish rubber moulded machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade fixed with grey cement and no pigment complete over and including 25 mm thick sand cushioning complete all as specified and directed.

M&L for rubber moulded glossy chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L 20mm thick granite (of any type) work table rubbed and pre polished in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick sreed bed in cm (1:6) complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete as specified and directed

S&F asbestos cement two piece adjustable plain wing ridge 6mm thick complete as specified and directed

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, profile bent to shape as reqired / directed fixed with L-type or J-type or cranked hook bolts with grade of zinc coating 275 complete as specified and directed

M&L for rendering 10mm thick in cement mortar 1:6 on brick/ concrete surfaces finished even & smooth with a thin layer of sagol finish in patches n exc 3.0 sqm in each complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) surface finished with sponge finish in patches n exc 3.0 sqm in each complete all as specified and directed

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer of same make over 2 mm thick wall care putty, complete all as specified and directed

M&L for preparation of new plastered surface and applying three coats of white washing on walls complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint on wall complete all as directed and specified.

Supply and fix in repair 3mm thick fibre glass ordinary quality and glazing with oil putty and atleast 06 Nos MS glazing clips per window pane fixed with steel window frames all as specified and directed.

Supply and fix 4.80 mm thick sheet glass ordinary quality and glazing fixed to aluminium window / ventilator shutters / steel windows etc all as specified and directed

M&L for preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L for GI tubing 15mm bore medium grade fixed to walls, ceilings or laid in floors complete all as specified and directed.

All as per item No 62 here-in-before but 20mm bore.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete bedding and making good to floor, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern, white with including cast iron 'P' or 'S' trap and connection to trap and seat cover with mild steel chromium plated hinging device and jet spray etc. including making good to floor, complete all as specified and directed.

S&F in repair vitreous china flat back type wash basin, white of size 550 x 400 mm including brackets, waste pipe and 32 mm bore waste cupling brass chromium plated complete all as specified and directed.

Supply and fixed in repair vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Stainless steel plate rack of size not less than 900 x 900 mm complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib cock fancy type complete all as specified and directed.

S&F in repairs two way bibcock as per Cat part No T3534A1 of make parryware or equivalent model of specified make given in PS all as directed.

S&F in repairs two way angle valve as per Cat part No T3543A1 of make parryware or equivalent model of specified make given in PS all as directed.

S&F in repair 15mm bore chromium plated angle cock fancy type complete all as specified and directed.

S&F in repair 15mm bore chromium plated concealed stop cock fancy type all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S&F in repair 15mm bore chromium plated pillar cock fancy type complete all as specified and directed.

S&F in repairs health faucet coral with hose and hook complete all as per Cat Part No T9803A1 of make parryware or equivalent model of sepcified make given in PS all as directed.

S&F in repairs seat cover white with hinging device for EWC neutral, warm and bright all as per Cat Part No E8309 of Make Parryware or equivalent model of specificed make given in PS all as directed.

S&F in repairs wall mixer non telephonic type complete all as per Cat part No G4741A1 of Make Parryware or equivalent model of specified make given in PS all as directed.

S&F in repair PVC connection pipe 15 mm dia 450 mm long complete all as specified and directed.

M&L for replacement / repair of sensor kit of wash basin and urinal of any description / make including make it functional complete all as directed.

Day to Day maintenance and petty repairs of buildings (complaints pertaining to joinery works) by attending daily complaints lodged by the users through IVRS/ mobile/ SMS or email and manual registration of complaints at B&R II sub division/ complaint cell on all working days (except sunday national holidays and closed holidays) by deploying one carpenter all as directed by Engr-In-Charge

Day to Day maintenance and petty repairs of buildings (complaints pertaining to water supply works only) by attending daily complaints lodged by the users through IVRS/ mobile/ SMS or email and manual registration of complaints at B&R-II sub division/ complaint cell on all working days (except sunday national holidays and closed holidays) by deploying one plumber all as directed by Engr-In-Charge. Note for item No 84 & 85 (i) Each job shall shall be completed within 24 hours. (ii) If the tradesman not attended complaint within time frame as directed by the Engr-In-Charge 50% of the quoted rate shall be deducted as penalty for first 24 hours delay and @10% for subsequent 24 hours delay. (iii) The contractor shall be responsible to maintain records for daily job completed by the traedsman deputed by him in the work and obtain the signature JE or Engr-in-Charge.

L.T Associate

Sai Construction

M/s Akshay Contruction

M/s Asrani and sons

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD