Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.0 LAccepted-AOC | L1 | Accepted-AOC Accepted as L1 | |
| 2 | L2₹38.7 L+₹2.2 L (6.10%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹39.2 L+₹2.7 L (7.50%)Rejected-Finance 27 ABUSETH ROAD DEHU ROAD PUNE 412 101 | NA | NA | 412101 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹39.7 L+₹3.2 L (8.73%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹39.9 L+₹3.4 L (9.36%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
9 Jul 2020, 6:00 pmClosed
GE DEHU ROAD, PUNE
GE DEHU ROAD, PUNE
REPAIR TO PLASTER ROOF TREATMENT TILING FLOORING AND PLINTH PROTECTION ETC AT SARVATRA NAGAR 105 AD REGT AND 953 WKSP UNDER AGE B AND R WEST AT GE DEHU ROAD
2020_MES_344213_2
8434
Open Tender
Civil Works
Item Rate
270 days
GE DEHU ROAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE DEHU ROAD, PUNE
₹90,000
Yes
12 Aug 2020
30 Jun 2020
11 Jul 2020
30 Jun 2020
9 Jul 2020
2 Jul 2020
Amount
Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.
Dismantling of boarding, any description and fixed in any position with nails complete all as specified and directed.
Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.
Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.
M&L rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality complete all as specified and as directed.
S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.
All as per item No. 8 above but plain sheet fix in valley gutter / ridge complete all as specified and as directed.
S & F 12mm thick Gypsum board for ceiling, insulation and accoustic purpose 60x60cm in size fixed with screws with staples incl aluminium snap grid frame work 605x605 mm in flat/slopting ceiling with aluminium anodised grid work 35.60x23.60x1.60mm main Tee 23.60x23.60x1.60mm cross section and 26x26x1.60mm angle including 3mm dia GI wire suspender of suitable length aluminium cleats etc complete all as specified and directed.
Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed.
M & L for providing 25 mm thick PCC 1:2:4 type B1 ( using 20mm graded stone aggregates ) as in filling in levelling course one roof slab complete all as specified and directed.
Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed.
M/L for cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :-(a) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (b) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (d) Finally applying a coat of solar reflective bituminium paint @0.15 Kg/Sqm over the membrane. (e) The make / treatment shall be from the one of the following manufacturer:- (i) 'Moply FP' of M/s Texsa (I) Pvt Ltd (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product. (iv) 'Hydroflame' of M/s Hydrotech Ltd.
Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.
Fixing only water tanks of capacity 500 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes complete all as specified and as directed.
S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.
Refixing old 15 mm bore steel tubing medium grade and connection in new or old position and fixed to wall, ceiling, floor complete all as specified and as directed.
Refixing old 20 mm bore steel tubing medium grade and connection in new or old position and fixed to wall, ceiling, floor complete all as specified and as directed.
M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms ) complete all as specified and as directed.
S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.
M & L for Rendering 05 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3 shall be even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement including 3% of WPC complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls over a coat of primer on plastered surfaces complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and as directed.
S&F in repairs 15 mm dia bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.
S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.
S & F in repairs 15 mm dia Brass cromium plated shower rose of 125 mm long leg complete all as specified and as directed.
S&F in repairsGrating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed.
S&F in repairs Toilet paper Roll Holder with Stainless Steel. Make Jagur/Prayag complete all as specified and as directed.
S& F in repairs stainless steel Sinks for kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and as directed.
S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.
S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.
S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed.
S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm all as specified and directed.Make Nirali/Silver shine/Jindal
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), all as speicfied and directed.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 all as direced.
M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.36 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified and as directed.
Ditto as per item No 48 above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed.
M & L Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.
M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.
M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete all as specified and as directed.
All as per item No 53 above but on skirtings incl 10 mm th rendering in CM (1:4) complete all as specified and as directed.
Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.
M & L for 100 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.
M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment over 25 mm thick sand cushion complete all as specified and as directed.
M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed.
S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce complete all as specified and as directed.
S&F in repair vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs complete all as specified and as directed. .
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white with 'P' or 'S' trap including connection to drains (or outgoing pipes) and to the flushing pipes, complete all as specified and directed.
Preparation of old plastered surfaces of walls including washing, rubbing down and stopping of distempered surfaces, filling the uneven surfaces with wall putty of approved make and applying two coat of distemper oil emulsion washable on old decorated surface of walls all as specified
M&L for preparation of New steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
DR J S CHADHA AND SONS
Star Construction
H S TAKHI
D J Construction
Dinesh Constructions
S Y Itkar Construction and Company
M/S RENUKA CONSTRUCTIONS
M/S BHASKAR MANIKRAO PAWAR
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .