Construction of Pucca Ghat in front of Mauni Baba Aashram at left bank of river ganga and development of destination tourism in Village - Gaura, Tahsil - Sadar, Distt. - Varanasi

Amount

Supplying & placing old E.C. bag filled with R.B.M. in nylon crate 1.00x1.00x 1.00m for constructing coffer dam including all cost of material, labour and T&P.etc complete if any.

Filling earth for water proof coffer dam in between E.C.bag filled with R.B.M. in N.C. complete in all respect.

Dewatering with 5 HP deisal pump including hire charges and P.O.L. complete.

Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe, casing and the length of pile to be embedded in the pile cap etc. 400 mm dia piles all complete as per direction of E.I.

Providing, cutting, bending & binding reinforcement steel for R.C.C. work.

Providing centering and shuttering for R.C.C. work

R.C.C. 1:1½:3 with Dalla grit 12-20 mm size and coarse sand including cost of all materials, labour T&p etc.

Supply and fixing 75 mm dia P.V.C. pipe for weep hole

Earth work in excavation of foundation in ordinary soil including lift up to 1.5m and lead up to 30m and including filling watering ramming of excavated earth in trench and removal and disposal of surplus earth as directed by E.I.

Supplying and dumping stone boulder in 8 BWG G.I.wire crate of size 2.00X1.50X1.00 m, and mesh size 20x20 cm including cost of G.I. Wire crate, all cost of material, labour and T&P.

P/L C.C. 1:3:6 with hard stone ballast 20-40 mm size and coarse sand including all cost of material, labour , T&P etc complete if any.

S/L Dry stone ballast 45-63 mm size in filter above sand including all cost of material,labour and T&P

P/L random rubble masonary work in R.M. 1:3 with coarse sand including cost of all material, labour and T&P.etc complete if any.

Providing struck raised pointing on stone masonary with C.M. 1:3 in coarse sand including cost of all materials, labour T&p etc.

Supply & laying stone step 1500x400x200 mm size on stair including all cost of material, labour and T&P.etc complete if any.

Supply and Laying fine dressed Stone patia in landing with C.M. 1:3 in coarse sand including all cost of material, labour and T&P.etc complete if any.

Supplying & placing Geo textile bag filled with R.B.M. for launching apron with all lead and lift.including all cost of material, labour, T&P etc. complete if any.

Dry stone boulder pitching including all cost of material, labour and T&P etc. complete if any.

Providing and making changing room with rectangular hut shaped all side pack. It is being top red stone size 15'0" L X 8'0" W X 10'0" H includind loading unloading, all cost of material, labour and T&P etc but excluding cost of stone cladding, flooring and roofing of plateform etc complete as per approved drawing/photographs and details & instruction as per directed by Engineer in charge.

1st class brick masonary work in C.M. 1:4 with coarse sand including cost of all material, labour and T&P.

12mm thick cement plastering on brick masonary with 1:4 C.M. including cost of all materials, labour T&p etc.

Providing and fixing Ist quality ceramic glazed wall tiles of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of average thickness 01 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting (two coat) with plastic emulsion paint of first quality approved brand and manufacture over applying one coat of white cement on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar dropings and other forein matter and sand prepared smooth.

Providing and placing on terrace polyethylene water storage tank,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes and fittings.

Providing and fixing 15 mm nominal bore. C.P. brass long nose bib cock / tap of approved quality complete as directed by EIC.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps .This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc (15 mm nominal outer dia).

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors One urinal basin with 5 litre white P.V.C. automatic flushing cistern complete as directed by EIC.

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440closet with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete as directed by EIC.

Providing and fixing White Vitreous China Wash basin size 630x450 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, pair of 15 mm C.P. brass angle taps complete as directed by EIC.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore complete in all respect.

Providing and fixing brass stop cock of approved quality 15 mm nominal bore complete in all respect.

ANITA SINGH