04-EFU(A)/ 2024-25

Amount

Work Dismantling of old small zinc kettle and installation of new small zinc kettle of size 3.7x0.60x0.60 meter,and other related work.

Dismantling of frame all around the Punctured zinc kettle after cutting the M.S. angle frame, C.R. sheet and earthing rod. Removal of clay stucked on bricks and stacking at place near the kettle for future use. Dismantling old base & making of new base of the new small zinc kettle in the galvanizing plant. Removal of the garbage including cleaning kettle tank.

Pulling/Dragging of old & deformed / Punctured small Zinc kettle size 3.70x0.60x0.60 meter having weight about 4.0 M.T. from Galvanizing plant to the suitable place with the help of chain tackle & rollers manually including shifting of galvanized tower parts on the way keeping aside.

Cutting the punchered kettle in to below 1-meter pieces with the help of gas cutter, weighing them and placing them in the steel yard, storing the zinc removed from the kettles.

Pulling/dragging of newly fabricated small Zinc kettle size 3.70x0.60x0.60 meter having weight about 4.0 M.T. from workshop shed No.3 to the galvanizing plant with the help of chain tackle & rollers manually including shifting of galvanized tower parts on the way keeping aside.

Construction of fire wall all around the small zinc kettle and new fire bricks and fire clay keeping 6” gap for coke filling and construction of pocket for taking out the ash.

Covering of fire wall all around the small zinc kettle after cutting of C.R. sheet of required size. Framing of fire wall with M.S. angle and earthing rod / cleat to keep the fire wall intact.

Dismantling of small zinc kettle dryer, placing old and normal bricks near the dryer. Cleaning and removal of garbage. Reconstruction of dryer, laying fire brick inside and normal bricks outside including fixing of angle frame ,the outside edge to complete the dryer.

Repairing of small Quenching tank including Cleaning the waste by draining water from the tank. Repairing the broken parts of the quenching tank by adding sand to the mortar, stone balast1/2" and cement. Framing the top of the wall with M.S. angle to keep the wall intact.

Repair of small acid tank(02No.) flux tank, water tankworking with AR bricks, sodium liquanite and hard coke pitch. Removal of AR bricks, placing old bricks near tank. Cleaning of tank. Reconstruction of wall with new and old bricks and coating them with AR cement. Joining of tank with bricks. Powdering of liquid hard coke pitch between wall and bricks to ensure leak proof operation. On top of plate form of each tank and RCC work. Framing of wall with M.S. angle to keep wall intact and coating of sand, fine mortar and cement on top of plate form.

Note- Electricity ,welding machine, Fire clay, Fire Brick, Hard Coke Pitch, Sodium Liquinite, A. R. cement, A.R. Brick, MS Welding Electrode, CR Sheet, MS Angle provided by the department free of cost.

Divya Traders

M/S YASHVARDHAN ENGINEERING WORKS