WBPWD/EE/KNHED/NIQ-49/23-24

Amount

Supply, Installation, Testing & Commissioning of 3.0 TR capacity concealed type split Air conditioner of rated cooling capacity of 36000 BTU/hr with 2 Nos rotary compressor, 02Nos 1.5Tr IDU of rated power supply 230V-01Ph-50Hz, 01 No ODU of rated power supply 230V-1Ph-50Hz. (Make: Hitachi/ Voltas/ Blue Star/Daikin)

SITC including vaccumiazation and Nitrogen of testing of following nominal size of soft/hard drawn copper refrigerent piping forpackage/VRV/VRF/RAC system, complete with fittings, with adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XLPE class -O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specification etc. as required. 5/8" (15.88 mm.) dia (Soft drawn) Cu. Pipes (As per standard BS864 or ANSIB 16.22) mm incl. 19mm thick insulation.

1/4" (6.4 mm) dia (Soft drawn) Cu. Pipes(As per standard BS864 or ANSIB 16.22) incl. 19mm thick insulation.

Supply and fixing of 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper Cable of the following size (Brand approved by EIC) incl. necy. fittings as required 3 core x 2.5 mm² Round PVC insulated copper cable(Make- Polycab/Haavells/ Gloster/ Finplex /RR Kable/KEI).

Supply & laying PVC Drain Pipe 25mm dia with 6mm thick Nitrile Rubber Insulation (Make: Suprime/Oriplast)

Supplying & fixing of MS Bracket for ODU unit to the Wall with fastener, nut bolts etc. as per direction of EIC.

Supplying and Fixing of PVC Loop box for outdoor power cable termination with supplying and fixing 240 V DPMCB Isolator on din rail of existing DBs and necessary connection (Make: Supreme or Appreoved make by EIC)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells/ Polycab/ KEI/ Gloster/ RR Kable) in 20/25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x (10 sqmm) + 1 x (6 sqmm) ECC

2 x (6 sqmm) + 1 x (4 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F5/9] i) 1.5/2.5 sqmm

ii) 4 sqmm

iii) 6 sqmm

iv) 10 sqmm

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E19/17]

Supply and fixing of 1Ph Timer for controlling 2 Nos. 1-Ph AC machine (HAT) of size 5.0Tr costing of the following materials: a) 24inch x 18inch x 6 inch single door MS box 2mm thick powder coated- 1 Nos b) Astronomical Timer (make: Seimens/L&T) - 1 No c) Single Pole MCB (210-220V/ 32A) (make: L&T/Seimens)- 2 Nos d) Double pole Pole Isolator (make: L&T/Seimens/ Legrand/ ABB) - 1 No. e) Double Pole Power Contractor required rating (make: L&T/ SEIMENS/ ABB)- 2 No f) ON (Green and RED) (2 Nos) Indicating Lamp LED- 2 Nos g) Toggle Switch for Bypass Time Switch for each machines- 2 No.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (North West/ Crabtree) & necy. Connections. [E17/5b]

Supply and installation of 12V 42AH Battery after dismantlling the old Battery incl. made connection as before and loading unloding charges. (Make: EXIDE POWER SAFE VRLA/SMF BATT or Equivalent Make)

TERMS & CONDITIONS :- The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

(Rate should be quotated including all taxes and duties) (Defect Labilities Period 01(one) year from the date of completion of work..)

M/s Singh Electrical Works

Lyric International