REPAIRS TO FLOORING,JOINERY,SANITARY FITTINGS, ROOF, PLASTER, FALSE CEILING,PERIODICAL SERVICES ,ATT AND WELCOME MAINTENANCE TO CERTAIN MARRIED AND OTM BLDGS IN KALINA AND SANTACRUZ AREA AT AF STN MUMBAI UNDER GE(AF)THANE

Amount

M&L for preparation of plastered or unplastered old surfaces of walls and apply two coats of white wash complete all as specified and directed.

M&L for preparation of plastered or unplastered old surfaces of ceilings and apply one coat of white wash complete all as specified.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth not otherwise described and apply one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed

M&L 3mm thick wall care putty on old wall surfaces

M&L for preparing old plaster surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of oil bound distemper over a coat of primer complete all as specified.

M&L 3mm thick wall care putty on old ceiling surfaces

M&L for preparing old plaster surfaces including washing, rubbing down and stopping of distempered and painted surfaces apply two coats of oil bound distemper over a coat of primer on ceiling complete all as specified.

M&L for preparing new plaster surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of oil bound distemper over a coat of primer complete all as specified.

M&L for preparing old painted surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of plastic emulsion paint over a coat of primer complete all as specified.

M&L for Rendering 10 mm thick ( first coat ) on fair faces of brick work or concrete surfaces in cement mortar 1:6 and 5 mm thick ( second coat ) in CM ( 1:4 ) mixed with water proofing compound including finished even and smooth without using extra cement complete all as specified. Note: Water proofing compound shall be measured and paid separately.

M&L for preparing new plaster surfaces of walls applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including scaffolding complete all as specified by GE/Engineer-in-Charge

Supply only integral water proofing compound

M&L for Opening out cracks, removing the loose material. Filling with polymer modified mortar and applying two coats of cross link polymer Ru-flex WG. Ru-flux WG to be mixed with cement and water in 1:0.9::0.10 ratio where 1 part Ru-flex, 0.9 part cement & 0.10 part water thoroughly mixed to form a brushable slurry and applied with a regular paint brush all as specified.

M&L for complete removal of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc filling up all cracks and defects with CM 1:3 and applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including scaffolding complete all as specified by GE/Engineer-in-Charge

M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying one coat of weather proof acrylic emultion paint all as per manufacturers instructions and directed including scaffolding complete all as specified by GE/Engineer-in-Charge

M&L for application of leakage/ seepage proof coating consisting of preparation of surface of exterior walls, parapet, chajjas etc with wire brush to remove all loose dirt, oil, grease etc and filling cracks more than 5mm wide with Dr Fixit Pedelite URP or with plaster seal of STP Ltd and crack less than 5mm wide Dr Fixit crack X powder or with plaster seal of STP Ltd and applying Dr Fixit primeseal primer or STP Ltd (and allow to dry/set for 08 Hours) and subsequently apply two coats of water proof decorative elastomeric coating system of approved shade/colour of Dr. Fixit Raincoat wih DFT 100 microns shade/colour or shalicry 2115 of STP ( The surface after painting one coat shall be allowed to dry at least 08 hours before next coat) through approved applicator all as per manufacturer instructions including double scaffolding etc complete all as specified and directed.

M&L for taking down plants of upto five storied height building of bushes of 10 plants per location of the building including taking down plants with roots and making good the surfaces by apllying a coat of appropriate acid treatment,etc and finishing the surfaces with CM 1:3, 100mm thick and acrylic painting to match with the adjacent surfaces.

M&L for Writting the name of buildings on extenal surface of wall of the buildingusing thick paint and shoulld standout solidly and boldly with out showing signs of brush in the format all as specified and directed by Engineer in Charge.

M&L for Writing stops, commas, short lines, dashes, hyphons, brackets etc all as specified and directed by Engineer-in-charge.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work complete all as specified.

M&L for 3mm thick one coat of wall care putty on new ceiling surfaces

Material and labour for preparation of new plastered surfaces on ceiling and applying two coats of oil bound distemper over a coat of alkali resistant priming paint all as specified but on ceiling

Taking up down steel tubing and connection including cleaning for re-fixingor removal to store complete all as specified

S&F steel water tubing 15mm bore of tubing in mm medium grade galvanised with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete.

Refixing old steel tubing & connections in new or old position (walls, ceilings, floors etc) of 15 mm bore of pipe.

M&L in repair 110 mm dia PVC pipe fixed in postion complete all as specified.

M&L in repair PVC bend/door bend 110 mm fixed in position complete all as specified.

S&F in repair PVC connection 15mm bore 600mm long with brass connections & washers.

S&F brass chromium plated shower rose 125mm size fixed in repair

M&L in repair PVC nahani trap 100mm dia with grating fixed in position complete all as specified.

S&F,in repair, vitreous china squatting pan orissa patern size 580 x 440 mm white with integrated foot rests (excluding flushing cistern & flush pipe as in repair)

S&F,in repair, vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets.

S&F high level flushing cistern plastic valve less syphonic action type white with inlet ball valve float chain and ball bracket & capacity 10 ltr ISI marked make commerder including 32mm PVC flush pipe.

S&F in repair 32mm high density polyethylene pipe (HDPE) of pressure rating 6 kg/cu cm fixed complete to walls ceiling or in floor.

S&F in repair pillar taps 15mm bore of pipes fancy type CP

S&F in repairs stop cock valves 15mm cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in fixed

S&F bib tap 15mm bore chromium plated cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe fixed in repairs.

Supply & Fix in repair Two way Bib taps(ISI Marked), fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm bore complete all as specified and as directed

Supply & Fix in repair Health Faucet with hose & hook(ISI Marked), fancy type chromium plated cast copper alloy fixed of size 15mm bore complete all as specified and as directed

Supply & Fix in repair angle cock for 15 mm bore, Fancy type Chromium plated(ISI marked) screwed down high pressure with crutch or butterfly handle, screwed both ends (externally theaded) for iron pipe or for unions and fixed complete all as specified and as directed for following dia of pipe.

S&F in repair PVC (SWR) bend 75mm bore any radius with access door

S&F in repair PVC (SWR) 110mm bore branch piece, single (Single 'Y') equal or with acess door.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stone and rubbish of the premises.

Dismantling of concrete in any position

M& L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base.

M&L for rendering 10mm thick in CM 1:3 as backing coat to receive dado finished.

M&L machine cut cudappa stone slab 15-20mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab , complete all as specified and directed by Engr-in-charge.

M&L Virtified Ceramic tiles Double charged dark shade/ double charged/ultra charged 10mm thick (Square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 for receiving floor finished ,complete all as specified and directed by Engr-in-charge.

M&L Virtified Ceramic tile Double charged dark shade/ double charged/ultra charged 10mm thick (Square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match over 15mm thick screed bed or bedding layer in CM 1:6 for receiving floor finished ,complete all as specified and directed by Engr-in-charge.

M&L for 450x300x7mm thick or n.exc 0.18 sq.m glazed coloured ceramic tiles as in vertical surface and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:3 as backing coat to receive skirting / dado, complete all as specified and directed by Engr-in-charge.

M&L black granite (of any type) 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:6 as backing coat to receive floors ,complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters form frame) not exceeding 1.5 sqm each

Taking down chowkats or frames with shutters (without taking off shutters form frame) . exc 1.5 sqm & n.exc 4 sqm each(wooden)

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each (wooden shutters).

S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening complete all as specified and directed.

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction all as specified.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified.

M & L 2nd class hardwood exc 13 & n exc 25 sqcm plain fillets.'square,rectangular or triangular insection, clean sawn, secured with nails orbrads complete all as specified and directed

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated.

S&F 30 mm thick flush shutters, solid core construction, with Block board core and plywoood face panels, commercial type on both sides complete all as directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed by Engr-in-charge.

M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required with and including removing debris outside MOD land.

S&F butt hinges stainless steel 100 mm long.

S&F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.

S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long

S&F extruded aluminium alloy handles 100mm fabricated type, anodised complete all as specifed

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc complete all as spcd.

S&F in repair plain fillets, square, rectangular or trianglular in section, clean sawn, secured with nails or brads sectional area exc 3 sqcm & n exc 6 sqcm

S&F in repairs door sliding bolt aldrop 250 mm long aluminum anodised Make-classic/Shalimar.

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in repairs

S&F extruded aluminum alloy handles, fabricated type anodized 150mm long fixed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm

S&F sheet glass ordinary quality 4.50 mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane

Taking down shutters of any description not exc 01 sqm each and removing from site complete.

S&F 18 mm thick MDF board, interior grade, prelaminated both side with decorative choice lamination, approved shade with and including lipping of first class hardwood fixed with screws to timber frame work etc all as spd and directed

S&F magnetic catches brass body and striking plate with aproved quality

S&F in repair continuous (Piano) hinges, mild steel bright finish or electro galvanised width of flaps (when open) in 40mm

Repairs to shutters of any description n. exc 1 sqm each easing & adjusting without taking down

Repairs to shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2 sqm

S&F in repair powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as spd

M&L in repair powder coated aluminum anodized grill of 4.5 x 7.5 mm bar size and 100 mm mesh with aluminium channel fixing of aluminium frame with necessary bolt/screw, or RG 103 or equivalent all as spd

M&L in repair for 5 mm thick frosted sheet glass fixing with aluminum frame with necessary screw/bolt complete

M&L machine cut cudappa stone slab 40 mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing including dismantling of cudappa stone over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab , complete all as specified and directed by Engr-in-charge.

Dismantling of floor or wall tiles, stone slab of any description or thickness laid ,bedded and pointed in anymorter all as specified and removing the debris outside MOD Land..

Taking down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store.

M&L for 20mm bore medium grade GI tubing with all fittings fixed to walls and ceiling or laid in floors

S&F Vitreous China wash down water closet pan(pedestal pattern) white (squatting pan & trap including 'P' or 'S' trap connection to drain (or out going pipe and to flushing pipe anti shyfonic pipe etc completely fixed in repairs complete.

S&F plastic water closet seat , black, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device in repair complete.

S&F low level flushing system plastic valveless syphonic action type white with inlet ball valve float chain and ball (of capacity 10 ltrs ISI marked inck 32mm PVC flush pipe as in repairs. Make Commander or equivalent ISI marked in repair complete.

S&F CP Towel rail 20 mm dia, D type 60 cm long.

S&F half turn CP Pillar taps of 15 mm bore with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shan ks and fly nuts screwed for iron pipe and fixed all as spd

S&F PVC SWR pipes 75 mm dia ,single socketed ,in any length with rubber ring joints laid in trenches or in floors.

S&F 75 mm bore PVC (SWR) bends .

S&F in repairs Aluminium Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repairs brass mortice lock 4 levers, vertical type size 100 mm complete all as specified

Dismantling AC/Galvalume sheets as in roof covering is any position all as specified and removing them outside MOD Land .

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and using necessary scaffolding as specified

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering, fixed with self tapping screws using necessary scaffolding as specified and directed.

S&F rolled sections with ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade Yst 240 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.

Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including cover fillets.

S&F MS joist, chanel, angle, or tee section fixed independently without conecting plates for holding ceiling make frame and similar work confirming to Fe-410-W Gde E 250

S&F 605 x 605 mm anodised aluminium snap grid frame work for false ceiling all as spd

M&L 06 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium/Steel frame work with screws or like in ceiling all as spd

S&F PVC false ceiling consisting of 600x600mm, 5mm(± 0.25) thick plain embossed PVC sheet of density 600 Kg/Cbm Manufactured by an ISO certified company, used as panel insert in a framework made using anodized aluminium T-section f sizes of 1''x1''(25x25mm,19 gauge or 1 mm thick) in square pattern of grid sizes 2'x2' (600x600mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and GI wire/6mm M.S rods of required sizes to maintain proper level etc. The aluminium framework is suported on side wall with the use of aluminium L-section of size 1''x1''(25x25mm) angles complete all as spd and directed by EIC

S& F and fixing 5mm prelam PVC sheet used instad of plain colour PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent cement ad fixing at site complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including old tarfelt etc and removing them outside MOD Land .

M&L PCC 1:3:6 type C1 (20 mm graded agg) in roof padding

M&L wire brushing and cleaning top surface of tiles lime terracing or cement concrete, including flashings and junction of parapets etc and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.7 Kg per sqm all as spd and directed

M&L APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application with and including primer complete all as specified and as directed.

M&L preparing surfaces of roof new or previosuly untreated surface applying 2 coats of bitumenous base aluminium paint over a coat of priming paints plastered coat.

M&L preparing surfaces of roof old painted surface or previosuly untreated surface applying 1 coats of bitumenous base aluminium paint over all as spd

M&L 10 mm thick plaster in cm 1:4 incl WPC on top of roof including raking out old surface (WPC will be measured separately)

M&L rendering 15mm thick plaster in CM 1:6 on stone or brick work including finished even and smooth without using extra cement an on internal walls.

M&L 3mm thick wall care putty on wall

Taking down cement plaster of any description on brick walls etc including raking out joints, hacking for key, scrubbing down with water complete.

M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on external walls.

Disconnecting existing tanks, exc 1000 & n exc 2000, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc completed all as spd and directed.

Disconnecting existing tanks,exc 250 & n exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc completed all as spd and directed.

S & F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, Bore dia of pipe in 20 mm, etc complete all as specifed and directed.

S & F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, Bore dia of pipe in 25 mm, etc complete all as specifed and directed.

S&F in repair Rotational moulded polyethylene water storage tanks ,triple layered (cylindrical vertical with closed top ) of 500 ltr capecity hoisted and fixed in position all as specified including dismantling old tank

S&F in repair Rotational moulded polyethylene water storage tanks ,triple layered (cylindrical vertical with closed top )of 2000ltr capecity hoisted and fixed in position all as specified including dismantling old tank

S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), Bore dia of pipe in 20 mm, etc complete all as specifed and directed.

S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms), Bore dia of pipe in 25 mm, etc complete all as specifed and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 1000 & n exc 2000, etc completed all as spd and directed.

Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required and removing them outside MOD Land .

S & F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or in floors, bore of pipe in 110 mm, etc complete all as specifed and directed.(At any height of building, till 4 floors also).

Removing of vegetation / plantation on the wall of multiple storey building including necessary scaffolding and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

S&F in repair SMC water tank cover of any make approved by BMC including locking device suitable for water tank of any capacity and having weight not less than 2.4 Kg all as specified and directed.

M& L for Post construction Anti termite treatment of soil under existing floors using emulsion chloropyrphos treatment of soil under hole, 300mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 (1 cement : 2 coarse sand) to match existing floors complete all as specified and directed by Engr-in- charge.

M& L for providing and injecting chemical chloropyrphos emulsion (with 20% EC) for post construction antitermite treatment along external wall below concrete or masnory apron @ 2.25 Ltr per running meter including drilling and plugging complete all as specified and directed by Engr-in- Charge.

M& L for Post construction Anti termite treatment at point of contact of wood work by chemical emulsion Chloropyrphos (20EC) (in oil or kerosene based solution) @ 0.5 Ltr/ hole by drilling 6 mm dia hole at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr- in -Charge.

M&L of voids in masonry using chemical emulsion as approved by IS 6313(Part 3) 2013 ( chlorpyrifos 20 EC )one Ltr per hole at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 Coarse Sand) to match the existing Surface.

Genius Construction Co.

Xcel Industries

Parmatma Enterprises

Maaz Construction

Vinod Enterprises

Vishal Builders

askonstruct and supplier