REPAIR MAINTENANCE OF LT DISTRIBUTION SYSTEM STREET LIGHTS AND CONNECTED ITEMS IN MAP AREA UNDER GE BRICHGUNJ

Amount

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised strip of 25x4 mm by means of nuts, bolts, checknuts, washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I of 2009 connected to earthing test point or disconnecting / testing link including excavation/ earth work in any strata, removal of surplus earth, GI pipe for watering and funnel, GI Pipe medium grade 40mm dia for earth lead protection, PCC 1:3:6 type C1 chamber with chamber cover in RCC 1:2:4 type B1.

Excavation in trenches not exceeding 1.50m wide and n.exc 1.5m depth for foundation, laying of UG cables etc or for shafts, wells, cesspits, manholes, pier holes etc not excluding 10 Sqm on plan in hard/dense soil and getting out complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm in any type of soil complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as directed.

Disconnecting and taking out old defective LT UG cable with aluminium conductor of any size/type from trenches/ walls/ poles/ pipes all as directed and as specified.

Supply,laying,jointing,connecting,testing underground XLPE insulated,PVC seathed, armoured heavy duty electric LT cable,1100volts grade with aluminium stranded conductor,10sqmm 2core,laid in trenches/fixed to poles/drawn through pipes with suitable size cable glands,crimping type cable lugs,sockets etc complete all as specified and directed.

All as item No 6 but cable of size 10 Sqmm 4 Core all as specified and as directed.

All as item No 6 but cable of size 16 Sqmm 4 Core all as specified and as directed.

All as item No 6 but cable of size 25 Sqmm 3.5 Core all as specified and as directed.

All as item No 6 but cable of size 35 Sqmm 3.5 Core all as specified and as directed.

All as item No 6 but cable of size 50 Sqmm 3.5 Core all as specified and as directed.

All as item No 6 but cable of size 70 Sqmm 3.5 Core all as specified and as directed.

All as item No 6 but cable of size 95 Sqmm 3.5 Core all as specified and as directed.

Supply, laying and fixing 50mm bore GI pipe light grade for necessary road crossing, culverts etc for cable protection complete all as specified and directed.

Supply, laying and fixing 40mm bore GI light grade for necessary road crossing, culverts etc for cable protection complete all as specified and directed.

Supply and lay HDPE double wall corrugated pipes confirming to IS-14930 Part II for cable protection of size 50mm OD and 38mm ID including all acessories such as bend, end caps and couplers etc,, complete incl taking down old DWC pipes complete all as specified and directed. Make : Gemini/ Tele-rex.

Supply and lay HDPE double wall corrugated pipes confirming to IS-14930 Part II for cable protection of size 50mm OD and 38mm ID including all acessories such as bend, end caps and couplers etc,, complete incl taking down old DWC pipes complete all as specified and directed. Make : Gemini/ Tele-rex.

Supply and lay HDPE double wall corrugated pipes confirming to IS-14930 Part II for cable protection of size 63mm OD and 50mm ID including all acessories such as bend, end caps and couplers etc,, complete incl taking down old DWC pipes complete all as specified and directed. Make : Gemini/ Tele-rex.

Supply and lay HDPE double wall corrugated pipes confirming to IS-14930 Part II for cable protection of size 77mm OD and 63mm ID including all acessories such as bend, end caps and couplers etc,, complete incl taking down old DWC pipes complete all as specified and directed. Make : Gemini/ Tele-rex.

Supply, replacing and fixing LED street light 70W dc driver 230V, outdoor type heavy duty of suitable size street light fitting after taking down fitting and refixng back on pole all as specified and directed. Make: Philips/ Crompton/L&T.

Supply, replacing and fixing LED street light 40W dc driver 230V, outdoor type heavy duty of suitable size in street light fitting after taking down fitting and refixng back on pole all as specified and directed. Make: Philips/ Crompton/L&T.

Supply and fix in replacement outdoor type SMC junction box of inner size 140x140x95mm, light weight suitable for mounting on pole/ wall/ coping using necessary fasteners including necessary connector for loop in loop out cable connection complete all as specified and as directed.

Supply and fix in replacement outdoor type SMC junction box of inner size 300x200x105mm, light weight suitable for for mounting on pole/ wall/ coping including necessary connector for loop in loop out cable connection complete all as specified and as directed.

Supply and fix in replacement 25 x 4 mm GI strip as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified and as directed.

Supply and fix in replacement LED flood light of min wattage 150 W made of Pressure die cast housing, IP protection IP 66 complete all as specified and as directed.

Taking down high mast light fittings mechanically / manually for repair / maintenance and refixing in same position after repair / maintenance such as greasing winch,filling gear oil, motor servicing/ repair & rewinding, starter repair etc & testing after service complete all as specified and as directed.

M&L for painting on old surfaces LT panel by spray paint after cleaning strains and grease/oil spots with sand paper & thinner and painting the cleaned surface with synthetic enamel paint of existing colour to achieve good finish by applying two coats of paints by spray painting machine crefully after disconnection of power supply and covering the meters, indicators and switches to prevent from fall of paint drop on them complete all as specified and as directed.

Supply and jointing as in replacement straight through joint, outdoor type 1100 volts grade, heat shrinkable type suitable for 3.5 core, 70 Sqmm to 120 sqmm LT, XLPE cable and testing after jointing complete all as specified and as directed.

Supply and jointing as in replacement straight through joint, outdoor type 1100 volts grade, heat shrinkable type suitable for 3.5 core, 25 Sqmm to 50 sqmm LT, XLPE cable and testing after jointing complete all as specified and as directed.

Supply and jointing as in replacement straight through joint, outdoor type 1100 volts grade heat shrinkable type suitable for 2/4 core, 10 to 16 Sqmm LT XLPE cable and testing after jointing complete all as specified and as directed.

Supply and fix in replacement aluminium crimping type lugs of size 10 sqmm complete all as specified and as directed.

Supply and fix in replacement aluminium crimping type lugs of size 16 sqmm complete all as specified and as directed.

Supply and fix in replacement aluminium crimping type lugs of size 25 sqmm complete all as specified and as directed.

Supply and fix in replacement aluminium crimping type lugs of size 35 sqmm complete all as specified and as directed.

Supply and fix in replacement aluminium crimping type lugs of size 95 sqmm complete all as specified and as directed.

Supply and fix in replacement aluminium crimping type lugs of size 120 sqmm complete all as specified and as directed.

Supply and fix in replacement copper crimping type lugs of size 16 sqmm complete all as specified and as directed.

Supply and fix in replacement copper crimping type lugs of size 25 sqmm complete all as specified and as directed.

M & L for PCC (1:3:6), Type C-1, (using 20 mm graded stone aggregate) as in Coping and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and directed.

M&L for repairing the existing LT Panel/ feeder Pillar Box any type or size by taking proper shutdown, disconnecting and reconnecting cables, welding/drilling for smooth funtioning of panel door, locking arrangement using aldrop complete all as specified and as directed.

Supply and fix in replacement 3 phase LED Voltmeter, Input voltage measurement range 50-520 VAC, having accuracy class 1, PT site programmable, Aux supply 80-300 VAC complete all as specified and as directed.

Supply and fix in replacement 3 phase multifunction meter type having accuracy class 1, Input voltage measurement range 50-520 VAC, having accuracy class 1, PT site programmable, Aux supply 80-300 VAC complete all as specified and as directed.

Supply and fix in replacement indicating lamps LED type set (R,Y,B) all as specified and directed

S &F in replacement CT Coil suitable 60/5A for different load complete all as specified and as directed.

S &F in replacement CT Coil suitable 250/5A for different load complete all as specified and as directed.

S &F in replacement CT Coil suitable 400/5A for different load complete all as specified and as directed.

S &F in replacement CT Coil suitable 500/5A 10 VA for different load complete all as specified and as directed.

Supply and fix in replacement solid aluminium bus bar for 3 phase and 01 neutral of size as per the load or as per the specification by engineer in charge, including space provided for internal wiring of the panel and holes to be provided for proper fasteners along with for as required including taking out of unserviceable aluminium bus bar complete all as specified and as directed.

Supply and fix in replacement energy saving LED light not less than 25W security light matching the existing pattern of aluminium casting with polycarbonate diffuser for soft illumination effect and powder coated complete on existing GI pipe complete all as specified and as directed.

Supply and fix in replacement energy saving LED street light not less than 36W matching the existing pattern of aluminium casting with polycarbonate diffuser for soft illumination effect and powder coated complete on existing GI Octogonal / RCC Pole pole of 9 mtr height complete all as specified and as directed.

Supply and fix in replacement energy saving LED street light not less than 65W matching the existing pattern of aluminium casting with polycarbonate diffuser for soft illumination effect and powder coated complete on existing GI Octogonal / RCC Pole pole of 9 mtr height complete all as specified and as directed.

Supply and fix in replacement Flood Light fitting 10W, 100-240V, energy efficient and IP65 with anti glare diffuser complete all as specified and as directed.

Supply and fix in replacement decorative Post top lantern 40 Watts with 360º indirect light, system wattage 40 W, Resistance to impact and corrosion, Glare free and better uniformity and making good disturbed surfaces complete all as specified and as directed.

M&L for stringing, drawing wiring complete with two run 1.5 sqmm FRLS single core PVC insulated unsheathed single core cable 1100 vots grade, multistranded with copper conductor (ISI Marked) drawn througn PVC conduit with one run of 1.5 sqmm FRLS single core multistranded copper conductor as earth continuity conductor including dismantling unserviceable wiring including accessories complete all as specified and as directed. Note: (1) Two runs of cable & one run of earth continuity conductor shall be measured as one running metre.

M &L for Rigid non-metallic PVC conduit of size 20mm dia inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc on poles, pillars of gate incl taking down old conduits of any size etc complete all as specified and as directed.

Supply and fix in replacement analog timer switch with 40A current carrying capacity suitable for mounting on DIN rail complete all as specified and as directed.

Supply and fix in replacement 3 pole contactor 40A with coil voiltage 230V AC complete all as specified and as directed.

Disconnecting the existing unserviceable MCCB from panel board after disconnecting cable & supply & fix new MCCB 63A, 4 Pole, 16KA, with thermal and magnetic release, fixed in existing panel including modification of existing frame and panel board door for proper installation of MCCB if deemed necessary and connecting with existing cable complete.

All as per item No 53 above but adj thermal and magnetic setting of 100A,4 Pole, 16KA all as directed and as specified.

All as per item No 53 above but of adj thermal and magnetic setting ,160A, 4 Pole 25KA all as directed and as specified.

All as per item No 53 above but adj thermal and magnetic setting of 200A, 4 Pole, 25 KA all as directed and as specified.

All as per item No 53 above but of adj thermal and magnetic setting ,250A, 4 Pole 25 KA all as directed and as specified.

All as per item No 53 above but of adj thermal and magnetic setting ,400A, 4 Pole36 KA all as directed and as specified.

All as per item No 53 above but adj thermal and magnetic setting ,500A, 4Pole 50 KA all as directed and as specified.

Supply and fix in repair MCB triple pole and neutral 63 amps C series complete all as specified and as directed.

Supply and fix in repair MCB triple pole 40 amps, C series complete all as specified and as directed.

Supply and fix in repair MCB Single pole 6 - 32 amps C series complete all as specified and as directed.

Supply and fix in repair MCB Single pole and neutral 32 amps C series complete all as specified and as directed.

M&L for detecting cable fault of size upto 300 Sqmm LT, XLPE cable by means of fault finding machine / manual including excavation or earth work if required at site and as directed.

S & F in replacement on Load changeover switch in and including Sheet steel Enclosure of 125 A rated current, 415V, 4P all as directed and as specified. Make: L&T/Havells/C&S

S & F in replacement 50 KVAR capacity duty contactor suitable for 440 V, 3 Ph with built in auxiliary contacts all as specified and as directed

S & F in replacement 25 KVAR capacity duty contactor suitable for 440 V, 3 Ph with built in auxiliary contacts all as specified and as directed

S & F in replacement 10 KVAR capacity duty contactor suitable for 440 V, 3 Ph with built in auxiliary contacts all as specified and as directed

S & F in replacement 5 KVAR capacity duty contactor suitable for 440 V, 3 Ph with built in auxiliary contacts all as specified and as directed

S & F in replacement gas filled capacitor of rating 8.33 KVAR suitable for 525 V, 50Hz all as specified and as directed

S & F in replacement gas filled capacitor of rating 12.5 KVAR suitable for 525 V, 50Hz all as specified and as directed

S & F in replacement gas filled capacitor of rating 25 KVAR suitable for 525 V, 50Hz all as specified and as directed

S & F in replacement 7% detuned copper wound reactors 50 KVAR suitable for 440 V, 50Hz incl necessary connections all as specified and as directed

S & F in replacement 7% detuned copper wound reactors 25 KVAR suitable for 440 V, 50Hz incl necessary connections all as specified and as directed

S & F in replacement 7% detuned copper wound reactors 10 KVAR suitable for 440 V, 50Hz incl necessary connections all as specified and as directed

S & F in replacement 7% detuned copper wound reactors 5 KVAR suitable for 440 V, 50Hz incl necessary connections all as specified and as directed

Supply and lay in replacement of 16 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) 1100 Volt with necessary copper cable lugs all as specified and as directed.

Supply and lay in replacement of 10 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) 1100 Volt with necessary copper cable lugs all as specified and as directed.

Supply and lay in replacement of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) 1100 Volt with necessary copper cable lugs all as specified and as directed.

Supply and lay in replacement of 4 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) 1100 Volt with necessary copper cable lugs all as specified and as directed.

Taking out ACB breaker for repair and servicing by disconnecting and dismantling the ACB breaker rating 1250/1000/800 Amps make L&T by carrying out repair/ servicing , checking and renewing the defective shunt trip coil & UV trip 230 V AC , checking and rectifying the defective CTs and rectifying the mechanism operation including spring charge system, reinstalling the same in the panel and providing necessary line and connections all as directed.

Supply only shunt release coil 240 V AC all as per sample and as specified

Supply only Closing coil 240 V AC all as per sample and as specified

Supply only undervoltage coil 240 V AC all as per sample and as specified

M & L for cutting the existing hard standing/PCC/WBM road at adepth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing cement concrete type B-1 (1:2:4) with 20 mm grade aggregate upto 20 cm, finishing to a uniform smooth surface complete all as specified and directed.

Supply and fix in repair energy saving LED Garden light of 10 W LEDs made up of aluminium casting with acrylic diffuser for soft illumination effect and the bollard trunk is of black powder coated with silver white finish for tripod stand complete all as specified and as directed Make: Crompton LED Garden light CAT NO: LBLSN-10-CDL or equivalent in C&S/ Havells / Philips

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised wire of 4 mm dia by means of nuts, bolts, checknuts, washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I of 2009 connected to earthing test point or disconnecting / testing link including excavation/ earth work in any strata, removal of surplus earth, 20mm GI pipe for watering and funnel, GI Pipe medium grade 15mm dia for earth lead protection, PCC 1:3:6 type C1 chamber with chamber cover in RCC 1:2:4 type B1.

Supply and fix in replacement right angled cold applied cable boot suitable to cover the end connections of HT cable of size 95 Sqmm 3 core connected to 11 KV, 630 A Siemens Make 8DJ HST Model RMU all as directed and as specified.

Supply and fix in replacement TPN bakelite connector/terminal plate 63A 4 way to be mounted on panel along with connecting cables to the connector all as specified and as directed.

Supply and fix in replacement TPN bakelite connector/terminal plate 100A 4 way to be mounted on panel along with connecting cables to the connector all as specified and as directed.

Supply and fix in replacement TPN bakelite connector/terminal plate 200A 4 way to be mounted on panel along with connecting cables to the connector all as specified and as directed.

Supply and fix in replacement epoxy HV bushing suitable for 200KVA Step Down transformer of Make: Eastren with copper bus bar after taking proper shutdown of transformer, disconnecting the cables, draining out theTransformer Oil in barrels, opening the top cover all as specified and as directed. Note: (a) The quoted rate is inclusive of connecting back the top cover, Filling the drained transformer Oil, connecting back the cables and checking for any leakages. (b) Gaskets required (if any) shall be deemed to be included in the quoted rate.

Supply, install and connection LT outdoor loop-in loop-out terminal box with sloping canopy of size 600x450x300mm made out of 3.15mm thick CRCA sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, front and rear hinged doors mounted on 25x25x4mm MS angle iron frame 60cms height, erected in ground with PCC foundation (1:4:8) type D-2 (using 40mm graded stone aggregate) including Supply and fix in repair insulated aluminium bus bar of size 40x5 mm for 3 phase and neutral respectively mounted on insulators and terminating with suitable cable with glands including taking down old terminal boxes complete all as specified and as directed.

M/s USHA ENTERPRISES

SHUSHANT ASSOCIATES

C KUMAR

Ms International Engineers

T.THIYAGARAJAN

NAVJEEVAN ENTERPRISES

M/s.Tarun Construction