SITC of AC Machine

Supply and delivery of 4.6 Ton capacity, 3 Phase, 380V-415V, 50 Hz, R410A based floor standing energy efficient Air Conditioning system complete with all accessories having rated cooling capacity 55000 Btu/Hr, Air flow level maximum 1170 CFM sound pressure level 54 bBA (High) and outdoor capailary Tube Refrigerant system. (Make- Daikin, Model- FVRN140AXV16 or equivalent model of Bluestar / Hitachi).

Supply, Fabrication & Fixing of MS angle stricture for holding the indoor Unit of 4.6 Ton capacity Floor standing split Air Conditioning Unit by 35 mm x 35mm . 5 mm thick MS angle having 4 number 300 mm length vertical support (each vertical support must have 6 mm thick base plate) and 750 mm x 400 mm bases portion with numbers horizontal support which are welded with each other. Entire stricture must be paint followed by two layer of prymer coat.

Supply, Fabrication & Fixing of MS angle stricture for holding the indoor Unit of 4.6 Ton capacity Floor standing split Air Conditioning Unit by 50 mm x 50 mm . 6 mm thick MS angle having 4 number 200 mm length vertical support (each vertical support must 8 mm thick base plate ) and 1200 mm x 450 mm base portion with 4 numbers (50 mm x 50mm) horizontal support which are welded with each other.Entire stricture must be paint followed by two layer of prymer Coat.

Installation of 4.6 Ton capacity Floor standing IDU and ODU on existing angle iron stricture with necessary anti-vibration pads, drilling, nutbolt arrangments etc.

Supply and filling of refrigarent R410A

Supply & Fixing of following refrigerant piping with hard drawn copper (19 SWG) Pipe including providing necessary fittings, accessories, jointing/brazing etc duly insulated with class-O nitrile rubular sections to prevent condensation with suitable adjustable type hanger supports etc. complete as required for 4.6 Ton floor mounted type machines.

i) Copper Pipe of 19.05 mm size for Suction line

ii) Copper Pipe of 9.25 mm size for Liquid line

Supply & fixing of 1.1 KV grade following sizes Unarmoured Copper Cable through 19 mm bore PVC rigid conduit pipe for main MCB and ODU & ODU to IDU connection. Termination points must be socket with Copper ring/pin type socket as per requirement. (Make- KEI/Polycab)

i) 6 Core 4 Sq. mm

ii) 3 Core 2.5 Sq. Mm

Supply & Installation of 25mm dia conceal water pipe line made by PVC hard pipe including socket, bends etc. PVC hard pipe line (as required) and making necessary connection including necessary bent, joints etc.

Less (-) cost of dismantling of 8 nos Old existing A.C. Machines @ ₹ 10000.00 Per machine (Rate should strictly be quoted @ ₹ 10000.00 Per machine or above for the Old existing A.C. Machines).

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST. (ii) The Agency must procure the materials for the Manufacturer / OEM or from their authorized sales channel, so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. iii) Documents that authenticate such procurement from the manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work / submission of bill. iv) If any refurbished material is supplied and installed, penal action will be taken as per existing rules.