REPAIR TO EXISTING AREA DRAINAGE AND CULVERTS ETC UNDER GE NASIRABAD

Amount

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, manholes etc and n.exc 10 sqm on plan and n.exc 10sqm on plain area and getting out in any type of soil complete all as specified and directed.

Returning, fillings in including spreading, levelling, watering and well ramming in layers, n.exc 25cm thick in soil complete all as specified and directed.

Removing of excavated soils, not exc 50mtr and depositing where directed at a level n. exc 1.50mtr above the starting point complete all as specified and directed.

M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9 mm dia complete, all as specified & directed.

M&L for PCC 1:3:6, type C1 using 20 mm graded crushed stone aggregate as in foundations, bed concrete of drain, surface channel etc, complete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M & L for providing precast cement concrete 1:2:4 type B1, using 20mm graded stone aggregates as in landing cover, drain cover, water troughs and similar work complete all as specified and directed by the Engineer-in-Charge.

Demolition of stone/brick masonry built in cement or cement lime mortar complete all as specified and directed.

M&L for stone walling, random rubble, uncoursed, well bonded, bedded and solidly hearted and built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work of fly ash bricks of old size built in CM (1:6) straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius, in half brick thick wall built in CM 1:4 complete all as specified and directed.

All as per sl item no 9.00 here in before but except Stone. NOTE: Old serviceable stones/brick retrieved vide Sl Item no 8.00 shall be reused.

M&L for PCC (1:3:6) type C-1 using 20mm graded aggregate as in coping finished even and smooth without using extra cement etc complete all as specified & directed.

Demolition of cement concrete (unreinforced) in any position & any description complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on stone masonry wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

Demolition and breaking up drain pipe of any description of any shape and size including all fitting and removing from site complete all as specified and directed.

M & L for PCC 1:3:6 Type D-2 using 40mm graded stone aggregate as in bed of drain pipe of 300mm dia (nominal) including packing under and haunching against the size of after they are laid and tested complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat surfaces of concrete , surface is required to be fair finished complete all as specified and as directed by the Engineer-in-Charge.

Extra over random rubble stone walling for hammer dressing to face stones and dressing to face beds & joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc 20mm on (Sand stone) complete all as specified and directed

S & F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/laid in floor, ISI mark, complete all as specified and directed.

S & F 75mm bore PVC (SWR) bend / shoe/Tee with oval access door of any radius complete all as specified and directed.

SHREE BALAJI TRADING CORPORATION

M/S Nexus Projects

M/S SHIVA TRADERS

M/S JAGDISH PRASAD AIRUN

GOMA CONTRUCTION COMPANY

PD GUPTA AND COMPANY

MAHARANI CONSTRUCTION

BSB CONSTRUCTION COMPANY

L P Singh and Co.