Repair to fencing drains path culvert Gate etc at Basoli under GE Basoli

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing ,dressed stone work and precast concrete article.

M & L walling of random rubble stone maronary uncoursed well bonded, bedded and solidly hearted built in CM (1 : 6) complete all as specified

-Ditto- all as per item No -2 above but except stone.

M & L brick work with subclass 'B' bricks straight or curved on plan exc 6.0 mean radius built in CM (1:6) complete all as specified

all as serl item No 4 above but except brick

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against dressed surface not exceeding 40mm (on granite or trap stone) to face stones and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought up to courses complete all as specified.

M & L flush pointing to random rubble stone masonary uncoursed in CM (1:4) complete all as specified.

M & L rendering 15mm thick on stones masonry surfaces or Brick/ Concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified.

M&L for two coats of white wash on newly plasteredd surfaces of walls including preparation of surfaces.

M & L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified.

M & L cement concrete (1:2:4) type B2 using 40mm graded stone agg as in drains beds and surface channels etc complete all as specified.

PCC (1:2:4) type B-0 using12.5mm graded stone aggregate as in coping incl necessary from work complete all as specified

M & L rendering 15mm thick on stones masonry surfaces on Brick/ Concrete surfaces in CM (1:4) finished even and smooth without using extra cement including taking down cement plaster complete all as specified.

M & L rendering 15mm thick on stones masonry surfaces on Brick/ Concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete as in Chajjas /Projection including taking down cement plaster all as specified.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Applying Two coats of Apex emulsion paint as in walls/roof projection/chajjas complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate in foundations, filling and mass concrete all as specified & directed.

S&F MS works as in fencing posts and struts including cutting tops to bottom shape as directed, drilling holes notching for wire etc flat iron fillets for securing razor wire etc incl all drilling bolting riveting etc and similar works conforming to FE 290 gde E-165 including excavation for post holes and removing of soil and retuning filling etc

-Ditto- all as per item above But in Refixing.

S&F Mild steel 10mm dia bars as in posts and struts in fencing including cutting top to shape as direct, drilling holes, notiching for wire etc incl welding, (for securing wire mash etc) incl all necessary drilling bolting or reveting,etc and similar work conforming to Fe290

Supply only chain link fencing of oblong wire mesh size 100x100mm with weight not exc 4 Kg/Sqm all as directed (Note- dia of main bar 4mm and cross bar 4mm ) complete all as specifed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire and fixing with MS angle iron fencing posts complete all as directed

Applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

S & F galvanised 2 strand steel barbed wire 2-24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galcanized mild steel wire staple or steel pins (Each line of wire to be measured) including taking down old barbed wire.

Restraining and resecuring of steel barbed wire fencing including making good staples etc complete all as specified & directed (each line of wire to be measured separately) complete all as specified

S & F Punched tape concentrina coil of dia of coil 600 mm ,56 loops, 2.5 mm core wire,heavy galvanised ( wire 275 GSM),tensile strength of wire 1400-1500 N/sqmm ,Streatchable length 12 mtr including securying or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc comlete including taking down old concentrina coil all as specified and directed

Dismantling structural steel work including doors, gates and any type of angles all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails ,braces .etc complete drilled for fixing of steel sheeting or other covering .Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive sttel sheeting) complete all as specified Gde Fe 410-W

S & F 0.80 mm mild steel plain black sheet in wall claddiing steel gates and similar works , cut to size holes punched including round headed screws fixed sttel framing with plain 40 mm lap joints with riveted or welded seams including bending complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

100 mm thick PCC 1:2:4 type B-2, using 40 mm graded stone aggregate,as in subbase all as specified.

M&L for 50 mm thick Sand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and directed by Engr -in- Charge.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed by Engr -in- Charge.

50mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregates as in sub bases of floors and pavings.

M & L Chequrred cement tiles with grey cement and pigment 30cmx30cmx25mm thick set, jointed in neat cement slurry including CM1:6 all as specified and directed by Engr in Charge

M & L for Furastone / Endura heavy duty virtified tiles of size 322mmX322mmX9.5mm mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cementmortar finished ceemnt concrete surface fair & Smooth without using extra cementcomplete all as specified and directed.

Preparing old plastered or unplastered surfaces of walls and applying one coat of white wash.

Preparing old plastered or unplastered surfaces of walls and applying one coat of cement based paint.

Applying One coat of Apex emulsion paint as in walls/roof projection/chajjas on Old surface complete all as specified and directed.

Mild steel TMT bars 10mm dia cut to length, bent to shape required incl crancking bending and hooping ends with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spd and directed.

RCC M-20(20mm graded stone aggregate) in Drain/manhole cover slabs supported on walls including form work to cover slabs soffit complete all as specified and directed.

M/S RAJINDER SINGH

Ms International Engineers

Om Sai Ram Builders

G N TRADER AND BUILDERS

Amrik Construction co

KHOSLA ENGINEERS BUILDERS

M/s. Jaswant Singh Govt Contractor