REPAIR AND MAINT OF GICIDI PIPE LINE INTERNAL WIRING EM FITTINGS FIXTURES STREET LIGHT FITTINGS AND ASSOCIATED WORKS OF ASCON NODES DANWAR SANGARH MOHANGARH AND DABLA UNDER THE JURISDICTION OF GE A JAISALMER

Amount

Taking up or down carefully steel water tubing and connection from any place including cleaning for refixing or to be issued as Sch of Credit of following sizes:-

(a) 20 mm bore.

(b) 25 mm bore.

(c) 50 mm bore.

(d) 80 mm bore.

Refixing of old steel water tubing and connections in new or old position (wall/floor/ceilling/trecheh etc) of following sizes:-

(a) 20 mm bore.

(b) 25 mm bore.

(c) 50 mm bore.

(d) 80 mm bore.

Supply and fix complete to walls / ceilings or laid in floors/trenches steel water tubing galvanised medium grade with all fittings of following sizes:-

(a) 20 mm bore.

(b) 25 mm bore.

(c) 50 mm bore.

(d) 80 mm bore.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of following sizes complete all as specified & directed by Engr-in-Charge.

(a) 20 mm bore.

(b) 25 mm bore.

(c) 50 mm bore.

(d) 80 mm bore.

S&F in repairs gun metel,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the follwing sizes with ISI marked and as per IS 14846 all as specified and directed by the Engineer-in-Charge.

(a) 20 mm bore.

(b) 25 mm bore.

(c) 50 mm bore.

(d) 80 mm bore.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc not exceeding 10 sqm on plan and getting out in Soft/dis integrated rock complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers of rock not exceeding 25cm complete all as specified & directed by Engineer-in-Charge.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of soil complete all as specified & directed by Engineer-in-Charge.

Removing excavated any type of soil/Rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

M & L for Burning of lead joint in position (old lead will be contractors property for which credit will be given separately) for the pipes of following sizes:-

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

(e) 250 mm bore.

(f) 300 mm bore.

(g) 400 mm bore.

M &L for run lead joint to spigot and socketed end pipes specials of following sizes:-

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

(e) 250 mm bore.

(f) 300 mm bore.

(g) 400 mm bore.

S&F in replacement mechanical/ Detachable/ Victaulic joints(class 10) with nut bolts washers rubber gaskets etc suitable for CI/DI pipes of following sizes:-

(a) 80/100 mm bore.

(b) 150/200 mm bore.

(c) 250/300 mm bore.

(d) 400 mm bore.

Taking down old u/s Sluice valve of any size complete all as specified & directed.

Supply and fix Sluice valve PN-1.6 with gun metal spindle and wedge nut ISI maked (IS-14846:2000) complete with iron wheel of following sizes:- Note:- Rate includes neccesary arrangements and cutting the pipe of required dimension with attachments for fitting the sluice valve.

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

M & L for taking out sluice valves refacing, regrinding and refixing alongwith rubber gasket complete of following sizes :-

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

(e) 250 mm bore.

(f) 300 mm bore.

M & L for taking out stainless steel spindle out of sluice valve and refixing it with new one with neccessay attachments to fit the existing valve complete for the following sizes :-

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

(e) 250 mm bore.

(f) 300 mm bore.

Taking up carefully from trenches/walls/ pillar CI/DI water mains incl all fittings with spigot and socket ends and lead joints incl burning out lead joint/rubber gaskets/lead wool/tyton joint for the following sizes:-

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

(e) 250 mm bore.

(f) 300 mm bore.

(g) 400 mm bore.

Relaying, realigning the DI/CI pipe line with spigot and socket ends (in any length) on wall/pillars with necessary fitments (tyton joint/rubber gasket,etc) for complete assembly of following sizes complete in all respect all as specified & directed by Engineer-in-charge.

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

(e) 250 mm bore.

(f) 300 mm bore.

(g) 400 mm bore.

M&L for PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in foundation concrete, mass concrete etc. complete all as specified & directed by Engineer-in-Charge.

Construction of valve chamber of size 120 x 120 x 120 cm (internal dimensions) with the following specifications :-

(i) 15cm thick PCC 1:4:8 type D-2 (using stone aggregate) as in foundation concrete. (ii) PCC solid block masonry 200mm thick using grade C-5 block in CM 1:6 (iii) Rendering 15mm thick in CM 1:4 finished even and fair. (iv) PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping. (v) 3mm thick MS sheet cover alongwith MS angle iron frame 40 x 40x6 mm duly embedded in coping concrete with necessary locking arrangement. (vi) Painting MS sheet cover and frame with two coats of synthetic enamel paint over a coat of red oxide primer. (NOTE : Excavation and earthwork shall be measured and paid seperately under respective items of Sch 'A')

S & F in repairs foot valve cast iron assembly of following sizes:-

(a) 50 mm bore.

(b) 150 mm bore.

Supply and fix in replacement cast iron non return (reflux) valve both flanged ends in swing type design as per IS 5312 Part-1, PN-1.0, of following sizes:-

(a) 80 mm bore.

(b) 150 mm bore.

M & L for cutting of branches of tree of various length to keep a clear pump houses and depositioning the cut branches upto 50 mtr from pump house complete all as specified & directed.

M&L for rectifying leakage of CI/DI pipe line including excavation in any type of strata as per site requirement and making arrangement for dewatering by using electric/diesel pump/manual additional labour by caulking with pig lead/ lead wool/ tyton joint complete all as directed for following sizes:-

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

(e) 250 mm bore.

(f) 300 mm bore.

(g) 400 mm bore.

Supply, fixing and testing, cast iron air release valve with two air outlet and fixing in existing CI/ DI water supply mains complete including necessary cutting/ drilling inserting tee, nuts, bolts etc including taking out old air release valve complete of follwing sizes all as specified & directed by Engineer-in-charge.

M&L in repairs for fixing MS leakage clamps 150 mm in width made out of 6 mm thick MS Sheet in shape and size duly drilled 2 holes in each side with necessary rubber insertion sheet of required size and MS bolt, nuts & washers incl. excavation/ earth work in any type of strata and dewatering of line water for prevention of water leakage from pipeline all as specified and directed suitable for following sizes of CI/DI pipelines:-

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

(e) 250 mm bore.

(f) 300 mm bore.

(g) 350 mm bore.

(h) 400 mm bore.

Laying, jointing and testing of cast iron pipes with spigot and socket ends centrifugally cast, class 'LA' suitable for tyton/rubber joint in any length laid in trenches/pillar etc of following sizes complete all as specified & directed by Engineer-in-charge. Note:- Items will be provided under Sch'B' by the department. The cost of transportation of pipe to the required site is included in the rate itself.

(a) 400 mm bore

(b) 350 mm bore

(c ) 250 mm bore

(d) 100 mm bore.

Taking down carefully old copper/ Aluminium point wiring, fitting and fixtures complete such as switches, ceiling rose, pendenent, regulators, sockets etc, removing unserviceable materials from site and making good disturbed surface etc complete all as specified & directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes complete all as specified.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC Cassing Capping and accessories etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally, with modular white cover plate with frame for mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FR LS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engr-in-charge for the following :-

(a) One light/fan point controlled by one switch 5 Amp one way

(b) -Ditto- all as per item no.2 but socket outlet 3 pin 5 amps same board

(c) -Ditto- all as per item no.2 but socket outlet 3 pin 5 amps Independent board

-Ditto- All as per Sl item No. 33.00 above but for one socket outlet of 15 Amps fixed on independent board with 2.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 1.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified & directed by Engineer-in-Charge.

S&F for Switch piano flush type single pole one way, and 6 amp complete ISI mark complete all as specified.

S&F for Socket outlet multipurpose having provision for 2 in 1, 3 pin 5 amp piano flush type complete all as specified

S & F for Switch piano flush type single pole one way, and 15 amp complete ISI marked complete all as specified.

S&F for socket outlet 2 in 1, 2/3 pin 5 Amps and 15 Amps flush type complete all as specified.

S & F in repair of modular type 1 way 6 Amp complete all as specified.

S & F in repair of socket ,6 A - 2/3 pin combined 2 modue complete all as specified.

S & F in repair of modular switch 1 Way 16 A,1 module complete all as specified.

S & F in repair of socket 6A/16A - 2/3 pin combined 2 module complete all as specified.

S & F ceiling rose 65 x50 mm three terminal 230 volt complete all as specified. Make : ANCHOR

S& F lamp holder , PVC /Polycarbonated type with back plate suitable for batten fitting all as specified and directed.

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA complete all as specified and directed. Make - Schindier/Legrand/L&T/ ABB

S&F in repair MCB DBs sheet metal enclosure single pole and neutral 240 Volt with 200 Amps rated bus bar 12 way double door type complete all as specified.

S&F in repair MCB DBs sheet metal enclosure single pole and neutral 240 Volt with 200 Amps rated bus bar 8 way double door type complete all as specified.

Supply and fixing MCB's SPN 40 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified. Make : Legrand ,C&S,Indo Asian

Supply and fixing MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified. Make : Legrand ,C&S,Indo Asian

M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC Cassing Capping including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete with two coat of black bituminus painting of old steel conduit with enamel paint of superior quality after scratching of old paint with sand paper complete all as specified and directed by Engr-In-Charge.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable and one run of PVC Cassing Capping shall be paid as one unit length)

S & F for LED tube light fitting 20 Watt 4 Feet or 1183 MM in lenth, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver , IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 2000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified. Make Orient, Philips, Crompton, Havells etc

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F Energy saving new generation 10/12 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make Orient, Philips, Crompton, Havells etc

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge. Make Orient, Philips, Crompton, Havells etc

S & F in repair bracket of GI pipe medium grade of 40 mm dia,clamps made of FI 40 mm x 6 mm Incl nuts,bolts & washers, painting complete all as specified.

Taking down ceiling fan / Exhaust fan of any sweep sealing cable end dismanting blade and removing fan and blade to store complete all as specified and as directed.

M & L for Painting of ceiling fan/ Exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc complete all as specified and as directed.

Fixing only ceiling / exhaust fan after serviceing greasing change of bearing if reqd, including making serviceable and noise free in all respect and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and as directed.

Taking down storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/50 ltrs of any type and make, in MES store Yard complete all as specified.

Refixing storage type water heater, checking the serviceablity of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly completet (considered as one unit) and installing and testing the same as per the direction of Engineer-In-Charge.(Supply only for parts against unserviceable parts shall be measured and paid for separately under relavent items given below)

Supply & fix in repair Sheet metal earth plug, socket with top, single pole and neutral with single pole MCB 20 Amps 240 volts fixed in repairs complete. Make :- HAVELL's / Legrand/ IndoAsian .

S & F for LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. Make Bajaj Cat part No BGCL 40 W LED WH or its equavalent in Philips, Wipro.

Taking down the desert cooler of any capacity from stand/slab for painting, clean the inner and outer surface of desert cooler with wire brush and made free from dust and sludge with wire brush in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

Taking out fan motor single phase 230 Volts, 1400 RPM 3 speed 1/8 HP from desert cooler and rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with 'E' class varnish, including replacement of gun metal bushes and reassembling and fixing in position complete all all as specified & directed by the Engineer-in-charge.

S&F in repair, top of desert cooler , of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet including gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, front side grill of desert cooler of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet including gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, side/back shutter fabric item made out of 1 mm thick galvanised iron sheet of size suitable for desert cooler of air delivery capacity 4000/5000 Cum/hour in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, corner of the desert cooler made out of 1 mm thick galvanised iron sheet of size suitable for desert cooler height as per the existing (up to 1.2 M) including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, bottom tank of desert cooler , of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet with gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, PVC flexible pipe of 16 mm outer dia complete all as specified & directed by Engineer-in-charge.

S &F in repair, wood wool pad (Set of three) fixed in three sides panel of desert cooler complete all as specified & directed by Engineer-in-charge.

S&F in repair, plug top 3 pin 5 amps, 230 volts (ISI marked) complete all as specified & directed by Engineer-in-charge. Make C&S/ Anchore/Legrand or equivalent

S&F in repair,switch piano type 240 volts, single pole one way 5 amps complete all as specified & directed by Engineer-in-charge. Make- Anchore/Wipro/Havells or equivalent

S&F in repair PVC insulated and PVC sheathed round flexible three core copper conducter cable of size 40/0.0076 sqmm complete all as specified & directed by Engineer-in-charge. Make-Anchore/ Havells/ Staranded or equvalent

S&F in repair, capacitor 4 MFD for fan motor of desert coolers complete all as specified & directed by Engineer-in-charge. Make-Epcos/Bajaj/ Havells/CG

S&F in repair, submersible pump PVC body 230 volts, 1/60 HP for desert cooler complete all as specified & directed by Engineer-in-charge. Make- Konark/Ajanta/Glun or ISI Marked

S&F in repair, aluminium fan blade powder coated for fan motor of desert cooler of 20 inch sweep complete all as specified & directed by Engineer-in-charge.

S&F in repair, cast iron ring of cooler fan motor with clamps incluiding nuts& bolts suitable for desert coolers complete all as specified & directed by Engineer-in-charge.

S&F in repair, PVC 3 way distributor suitable for 15 mm flexble pipe with nuts and screws for desert coolers complete all as specified & directed by Engineer-in-charge.

S&F in repairs float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm bore iron pipe, weight not less than 140 grams/each, suitable for water/desert coolers complete all as specified & directed by Engineer-in-charge. Make- Prayag or equivalent

Note :- The location for execution of work will be Escon Nodes at Danwar, Sangarh, Mohangarh and Dabla area, Rates to be quoted by the contractors considering the distance locations.

Taking up/down of old unserviceable cable of size 16 Sqmm 4 Core complete all as specified & directed by Engineer-in-charge.

Dismantling & taking down Street light fittings including brackets etc. complete all as specified & directed by Engineer-in-charge.

Dismantling the existing LT Panel size/type complete all as specified & directed by Engineer-in-charge.

Taking up/down of old unserviceable copper wire of size 2.5 Sqmm Two Single core complete all as specified & directed by Engineer-in-charge.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-charge. (Note :- For the purpose of payment only punned thickness will be measured).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engineer-in-charge.

Labour only for checking the serviceability of different spares / components / parts of security light fittings (LED/HPSV, HPMV, Metal Halide fittings etc, any wattage/capacity) of any description and in any position, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in position, cleaning acrylic/glass cover connecting to electric supply and its testing on installation etc complete all as specified and directed by Engineer-in-Charge.

Supply only bipin holder suitable for security light fitting 4x14, 4x24 Watt complete all as specified & directed by Engineer-in-charge.

Supply only tube rod T5, 14 watt, single rod suitable for security light fitting 4x14 watt complete all as specified & directed by Engineer-in-charge. (Make :- Crompton Greaves Cat Part No. T514W 6500K/4000K/2700K.

Supply only tube rod T5, 24 watt, single rod suitable for security light fitting 4x24 watt complete all as specified & directed by Engineer-in-charge. Make :- Crompton Greaves Cat Part No. T524W 6500K.

Supply only electronic ballast, T-5, 2x14 watt, 240 volts suitable for security light 4x14 watts complete all as specified and directed by Engineer-in-Charge. (Make :-Crompton Greaves Cat Part No EBN 214T5-A or.

Supply only electronic ballast, T-5, 2x24 watt, 240 voltssuitable for security light 4x24 watts complete all as specified and directed by Engineer-in-Charge. (Make :-Crompton Greaves Cat Part No EB224T5-B/I).

Disconnecting and taking out existing MS boxes of any description and in any position on poles or fixed in the plinth of poles and supplying and fixing in position new PVC (Sinthetic ) boxes of size 270 mm X 225mm X 135mm depth, made out with Sinthetic. The box shall be provided with and including 10 cm long aluminium bus bar of size 20x3 mm size 2 Nos mounted on porcelain insulators including one No. MCB SP of ‘C’ series, 5/6 Amps of Make Legrand/L&T/ Siemens and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5 mm FI clamps, nuts, bolts & washers etc complete all as specified and directed by Engineer-in-Charge.Make :- Sintex Note :- The contractors quoted rates for the above items are deemed to include for fixing the Sinthetic box in position with suitable MS clamps and/or necessary PCC as per site requirement.

S&F in repair, cable 2.5 sqmm two single core, aluminium multistrand, PVC insulated, unsheathed, 1100 volts grade complete all as specified and directed by Engineer-in-charge.

S&F in repair, MCB single pole 6 to 40 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.Make :-Havells Cat No. DHMGCSPF006-040 or equivalent makes mentioned in Appx 'C'.

supply and laying ,testing XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade for the 16 Sqmm 4 Core cross sectional area all as specified and directed by Engineer-in-Charge.

M&L for bore earthing not less than 250mm dia 16 feet deep filled with black soil upto 7 feet from bottom complete with galvanised iron pipe 40mm bore medium grade 3m long tapers at bottom & provided 12mm holes (staggered) at 75mm centre to centre upto 2.5m of length from bottom, burried directly in ground filled with 45cm alternate layer of magnisium sulphate, charcol & salt up to ground level & connected to galvanised iron strip 32x6mm above ground level as earthing lead by means of bolt and nut, check nuts and washers of galvanised iron or steel including brazing work upto equipment and 40mm dia light grade GI pipe for earth lead protection and testing on completion complete including taking out old earthing all as specified & directed by Engineer-in-charge.

S&F integral LED street light luminaire comprising of epoxy powder coated housing, enclosed with glass cover in frame of capacity 45 watt mounted on MCPCB including taking down existing street light fittings & make electrical connection with 3 single core of 2.5 Sqmm aluminium cable from overhead line/junction box to street light fitting complete all as specified and directed by Engineer-in-charge. (Make:- Crompton Greaves Cat Part No.LSTP-45-CDL.

S&F GI pipe light grade of dia 40 mm laying in road and along with poles for cable protection complete including taking down old pipe all as directed by Engineer-in-charge.

S&F in repair, galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings all as directed by Engineer-in-charge.

Supply only the parts of LED fittings:- (a) Driver 45/48W, Make- CG/Havells/Bajaj.

Supply, installation testing and commisioning LT Panel 415 volt for wire AC 50 Hz factory made, CPRI Approved floor mounted,Outdoor type panel made out of MS sheet of size 3.15 mm thick of size suitable size for fixing of MCCB, Aluminum bus bar with having separetely locking arrangements duly with powder coated and mounted on an angle iron frame, 40 cm hright above ground level duly fixed with PCC etc, including contol wiring complete to accomodate including the following accesories-:

Siddharth Constructions

M/s Shri Inder Construction Company

S R ENTERPRISES

M/S RAKESH CHOUDHARY