Repairing of colony road including CISF colony at Manikpur OCP, Korba Area

Amount

(Excavation in Soil by Manual Means) Excavation for road way in soil using including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto1000 metres as per relevent clauses of section-300.

Footpaths and Separators Construction of footpath/ separator by providing a 150 mm compacted granular sub base as per clause 401 and 25 mm thick cement concrete grade M15, over laid with precast concrete tiles in cement mortar 1:3 including provision of all drainage arrangements but excluding kerb channel.

Tack Coat Providing and applying tack coat with bitumen emulsion using emulsion distibutor at the rate of 0.20 kg per sqm on the prepared bituminous / granular surface cleaned with mechanical broom.

Bituminous Macadam Providing and laying bituminous macadam with minimum 46-60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.

Seal Coat (Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats) Type B (Providing and laying of premix sand seal coat with minimum 40-60 TPH HMP of appropreate capacity not less than 35 tonnes / hours using crushed stone chipping 6.7 mm size and bitumen.)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes .

Direction and Place Identification signs upto 0.9 sqm size board. Providing and erecting direction and place identification retro-reflectrorised sign as per IRC : 67 made of high intensity grade sheeting vide clause 801.3. fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

Total impact of GST for the purpose of CTC

Shrikishan And Company Pvt. Ltd.