REPAIR TO FENCING, GATE, COMPOUND BOUNDARY WALL, HARDSTANDING, PATH AND CERTAIN MISC WORKS IN AICTS NGM OGM FAFA PCDAO AND NADFM AREA UNDER AGE BR-I OF GE SOUTH PUNE

Amount

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

Dismantling posts & struts (Steel or RCC), embeded in concrete, any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks including dismentling of old unservieable PCC block / stone / brick masonary, complete all as specified and as directed

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), including taking down of old unserviceable barbed wire of any type complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on brick surfaces finished even smooth with spong finish duly mixed with integral water proofing compound as per manufacturer’s instructions, complete all as specified and directed Note:- WPC shall be measured and paid separately under respective items of BOQ

Supply only liquid water proofing chemical complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

M&L for applying two coats cement base paint (snowcem) over a coat of alkalai resistant primer on new walls surfaces, including preparation of surface of walls, complete all as specified and directed.

Supply only chain link MS galvanized fencing of any size & shape complete all as specified and directed

S&F Hand rail, half round or other stock section, fencing post including cutting notching for wire etc flat iron fillets including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 Ged E-165 complete all as specified and directed

S&F framed work such as in hunge gate including pintal hinges, stops handmade sliding bolt grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; including ornamental and intricate design, walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails straining bolts including provision of binding wire including dismantling of old existing unserviceable fencing wire mesh of any type, complete all as specified and directed

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregates as in hard standing / approaches of 75mm thick, finish even and smooth without using extra cement including marking with brooming on top surface, complete all as specified and directed.

M&L for coloured Machine pressed precast concrete interlocking paver block tiles M-35 of 60 mm thick of any shape and size confirming to IS 15658-2006, glossy finish with moulded as in floor / pavement laid over and including 20 mm thick stone dust cushioning complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed.

M&L for cement concrete type B2, 1:2:4 (Using 40 mm size graded stone aggregate) as in ground / walls / retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts including demolition of existing cement concrete (including caps and bases) or chamfered angles and throating etc complete all as specified and directed

M&L for glazed coloured digital printed ceramic tiles of size 600 mm x 300mm x 7mm thick as in vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles with and including 15 mm thick backing coat in CM 1:4 and triangular filleting at top in cement mortar 1:4 including taking dismantling of existing tiles of any description including backing coat complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) including demolition of old existing brick work, solid block or stone masonry built in cement mortar or cement lime mortar complete all as specified & directed.

Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and directed

Excavation in any type of soil for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 25 cm, watering, and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed.

M&L for 20 mm thick Granite slab (of any type/colour) work (table rubbed and polished) in steps, pillars; window cills / jamb, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite. as counters of any radious etc laid over and including 20 mm thick screed bed in CM 1:4 including dismantling of existing stone slab of any description including removal of debries & demolished materials complete all as specified and directed.

M&L for precast coloured chequrred cement concrete tiles, glossy finish of size 305 x 305 x 25 mm thick machine pressed set jointed and pointed with grey cement and pigment as in floor and cut and polished laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Dismantling structural steel work including doors, gates etc, complete all as specified and directed.

Removing of building / demolished materials & debries etc. to a distance of 4 to 5 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate, set in CM 1:4 as in jallies, 50mm thick (Measured solid) including dismantling of old unserviceable jallies complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, built in cement mortar 1:6, brought up to course including dismantling of old unserviceable stone / PCC block / brick walls, complete all as specified and directed

M&L for raking out joints / pointing to stone masonry in walls surface, cement mortar, include for raking or cutting out joints and decayed mortar etc, not less than 12mm deep, washing the joints, removing rubbish off the premises, and keeping the surface to be pointed wet for 2 days prior to re-pointing complete all as specified and directed

M&L for flush pointing to brick wall in cement mortar 1:4, complete all as specified and directed.

M&L for RCC 1:2:4 type B-1(Nominal mix) using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, including dismantling of old unserviceable RCC of any description & type complete all as specified and directed

M&L for RCC 1:2:4 type B-1 (Nominal mix) using 20 mm graded crushed stone aggregate as in column, pillars, piers, posts and struts etc, including dismantling of old unserviceable existing RCC of any description & type complete all as specified and directed

M&L for RCC 1:2:4 type B-1 (Nominal mix) using 20 mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc, including dismantling of old unserviceable existing RCC of any description & type complete all as specified and directed

M&L for form work to flat foundation, footings, bases of column, raft & raft beams, side & soffits of foundation and plinth beams and similar work, fair finished surface of concrete, complete all as specified and directed.

M&L for form work to soffit and sides of floor / roof beams, shelves & lintel, finished the surfaces fair, complete all as specified and directed.

M&L for form work to side of pillars, post, struts & columns etc., finished the surfaces fair, complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping and the like including weathering, slightly rounded or chamfered angles and throating including fixing glass on coping as directed by Engr-in-Charge including use of necessary form work etc complete all as specified and directed.

S & F TMT bars 8mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending , binding, hooking ends abd binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. complete all as specified and directed

TULSAYA CONSTRUCTION (BID ID -3156668)

REKHA ELECTRICALS (BID ID -3166621)

SARATH ENTERPRISES (BID ID -3159444)

Gauri Associates (BID ID -3161509)

M/s.BAJRANG CONSTRUCTION (BID ID -3158508)

ANIL CONSTRUCTION CO. (BID ID -3161429)

Sayili Enterprises (BID ID -3161652)