"Construction of Approach Road and provision of street light arrangement at Factory Gate to MRS/MEW."

Supply and fixing of hot dip galvanised octagonal pole of overall length 6.0 mtr, 70 mm top dia, 135 mm bottom dia, pole sheet thickness 3 mm with accessories base plate dimensions: 1 200 mmx 200 mm x 12 mm. J type foundation bolts 4 no. Size M16x600, pitch circle dia 200 mm. bolt length 600 mm, single arm bracket 0.5 mtr length suitable for one no. luminarie with smart pack junction box with bakelite sheet, 6A MCB & amp; internal wiring for terminal to fitting with 2x2.5 sq.mm cable of reputed make. Make - Bajaj, Transrail, Valmont

Making of foundation suitable for 3 to 8 mtrs octagonal pole as per site in charge / 4'X4'X4' manufacture dimension & amp; as per site requirement

Fixing and supply of LED street light 60 W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high power LED as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 on pole/wall with suitable size G.I. 3 Pipe of medium gauge smooth bend with 120 degree (2 feet + 1 feet) long, MS clamp. Nut bolt etc. as required, Kit-kat fuse 16 amp in suitable size MS box should be provided with G.l. pipe. Wiring/connection of fitting and kit-kat fuse will be done with not less than 2.5 sq.mm aluminum wire through G.I. pipes and PVC flexible pipes complete in all respect. Similar to Havells cat. no. ENDURAPEARLNEOSL60WLED75 7PASYTOPCAST. Make of Luminaire, Philips, Havels, Bajaj and Crompton. LED Luminaire warranty period will be 05 years.

Laying of the cable partly through trench at a depth of one meter and filling with 4 sand, 16 Nos bricks per meter run or under the road by laying through G.I. pipe at a depth of one meter or at platform/road/wall where excavation of one meter is not possible only cutting of the surface to the size of cable with at lest two inch covering by concrete is required and refilling with earth and partly of the rail/lamp post/PF color/wall with supply of clamp made of MS flat 35x6 mm with nut-bolts adequate number with maximum space of one meter/wherever feasible etc including connection as per site condition of different sizes of cables. For laying each cable separate trench is required. In case due to space constraints more than one cable is required to lay in one trench, payment will be released in form of length of trench and not in length of underground cable. (Cable will be supplied by Railway from separate item).

Provision of earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories with charcoal andsalt as required and providing masonary foundation work, watering arrangement etc. Pipe make - Tata, Jindal, Bansal.

Supply, laying and fixing of GI pipe of 50 mm dia for laying the cable across the road/drain/post 'B' class make- TATA/JINDAL/BANSAL

Supply of PVC/XLPE LT AL Cable, size- 4x25 Sqmm, , PVC Inner sheathed, Armoured with galvanised steel strip, Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments, make- Havells /Polycab/KEI. Above/

Item Breakup - D2-DSR vol 1 and DSR vol 2

Item Breakup - D3-DSR vol 1 and DSR vol 2

0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm. 16.40S SEAL COAT 16.40 Providing and laying seal coat of premixed fine Sqm 1890 88.55 167359.5 aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen 3 of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. 16.49S MISCELLANEOUS Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, 16.78 spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 16.78.2 With material conforming to Grade-II (size range 53 cum 600 2924.85 1754910 4 mm to 0.075 mm ) having CBR Value-25 Total 3377205.00