REPAIRS TO JOINERY, PLUMBING, SEWAGE LINE, DRAIN, PATH AND BOUNDARY WALL AT 3U DET UNDER GE (I) CAMPBELL BAY

Amount

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as directed.

Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail ; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing

Material and Labour for Solid PVC door frame of size 50mm 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying and fixing in opening as per specification and drawing.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as directed.

Supply and Fixing of 35 mm thick 2nd class hard wood factory made plain framed, paneled shutter (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.

Supply and Fixing of 2nd class HW, 35mm thick glazed and skeleton shutters, open rebated and rebated and prepared to receive glass or gauge etc., without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for screwing glass / gauge etc., sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) all as specified and directed.

Supply and Fixing Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed.

Taking down shutters of any description not exceeding 1 sq. m each all as specified and as directed

Supply and Fixing of flush shutters, 25 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S & F Hasp and staple, 75 mm long safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

Taking down shutters of any description exceeding 1 sq. m and not exceeding 2 sq. m each all as specified and as directed

Supply and Fixing of Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Supply and Fixing of MS Butt hinges 100mm long medium weight cold rolled and fixed to chowkats/shutters all as specified and as directed.

Supply and Fixing of Stainless Steel Butt hinges 75mm long fixed to chowkats / shutters, complete all as specified and directed.

Supply and Fixing of 250 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy all as specified and as directed.

Supply and Fixing of 150 mm long Extruded Aluminium alloy handles, fabricated type, anodized all as specified and as directed.

Supply and Fixing of 150 mm long Aluminium, anodized, barrel tower bolts of extruded section all as specified and as directed.

Supply and Fixing of 100 mm long Aluminium, anodized, barrel tower bolts of extruded section all as specified and as directed.

Supply and Fixing in repairs aluminium alloy wire cloth or XPM, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.

S & F at site wood grain printed PVC sheet, 5 mm thick fixed or laid on to aluminium doors by using rubber based adhesive, as per specification used instead of Plain colour PVC sheet all as specified and as directed by Engr-in-charge.

Material & Labour for Anodised aluminium frame for doors, windows ventilators with one or more rebates including (minimum thickness of anodised coating 50 micron), joining cleat for fixing etc. complete all as specified and directed.

Supply and Fixing of Anodized aluminium window and ventilator shutters glazed and gauged, side hung type without sash bars for aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays, hinges, suitable handles etc., complete all as specified and as directed.

Supply and Fixing in repairs 12mm dia stainless steel curtain rail 12 mm dia fixing with all types of bracket to required length complete all as specified and as directed. Note : rate included for side bracket for fixing complete

Hacking out old broken unserviceable glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

Supply and Fixing of 4mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and Fixing of 3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and Fixing in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, chain and plug and porcelain stopper but including brackets, waste couplings 32mm dia, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

Supply and Fixing in repairs Vitreous China Squatting pan 'Orissa pattern size 580x440 white with integral foot rests with `P' or `S' trap, front or back inlet including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor all as specified and as directed.

Supply and Fixing in repair European type WC (Pedestal Pattern) complete including pedestal pan and trap including connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as specified and directed.

Supply and Fixing in repair PVC valve less, syphonic action type, flushing cistern, 10 litres, low level, white, with inlet, ball valve, float and handle including brackets with all fittings all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe 15 mm complete all as specified and as directed.

Supply and Fixing of GI water tubing of 15 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified and directed by engineer in charge

Refixing of old steel tubing obtaining from taking down and connections new or old position (wall, ceiling, floors etc.,) of 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe 20 mm complete all as specified and as directed.

Supply and Fixing of GI water tubing of 20 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified and directed by engineer in charge

Refixing of old steel tubing obtaining from taking down and connections new or old position (wall, ceiling, floors etc.,) of 20mm bore complete all as specified and directed.

Supply and Fixing in repairs for 32mm bore of pipe Low density poly-ethylene pipes (LDPE) of pressure rating 6 kgf/cm2 , wall, ceiling ,floors or in trenchesall as specified and as directed.

Supply and Fixing of in repairs angle stop cock 15mm bore, fancy type, chromium plated (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and directed.

Supply and Fixing in repairs CP Bib taps, 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

Supply and Fixing in repairs Pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

Supply and Fixing of in repairs 32mm size waste couplings of PTMT (half or full threaded) minimum weight 32mm 45gms complete all as specified and directed.

Supply and Fixing of in repairs towel rail 450mm long of Stainless Steel fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 170gms) complete all as specified and directed.

Supply and Fixing in repairs swivel shower of PTMT any coloured for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and directed.

Supply and Fixing in repairs shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed.

Supply and Fixing of PVC connections 15mm size 600mm long with PTMT nuts complete all as specified and directed.

Taking down of cement plaster any description including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance not exceeding 250 m.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using Water proofing compound@ 2% by weight of cement,finished even and smooth etc complete all as specified and as directed (WPC will be measured under separate item)

Supply only of Integral waterproofing compound of approved make all as specified and directed.

Material and Labour for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of walls, finished even and smooth ( without using extra cement) complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

M & L mild steel angle iron framed Work as in Door or Gates of Angle Iron or Other Sections with Gusset Plates Rails, Braces, etc. Cut to size, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated or directed including, Drilled for fixing of Steel Sheeting or other Coverings, Doors, etc. (exclusive of Steel Sheeting) and hanging, fixing also fastening, confirming to grade Fe-410-0 or Fe-310-0, complete all as specified and as directed.

S & F Rolled sections as in main and cross beams,hip and jack rajters,purlin where connected to common rafters and running rails and guides for sliding doors,fixed with angle cleats or other connecting plates conforming Fe-410W (Gde-E-250) quality -A complete all as specified and as directed

Supply and Fixing of framed work chajjas grills, grading’s etc with end of bard shouldered and, or riveted framed guarded bars iron doors/ window confirming to Fe 290 Gde E-165 all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Material and Labour for providing cement concrete type C2 1:3:6 (40mm graded aggregate) in foundation filling plinth protection and mass concrete all as specified and as directed.

Material and Labour for providing cement concrete type C2 1:3:6 (40mm graded aggregate) as in walls of drains & toe walls etc any thickness,size or shape all as specified and as directed.

Material & Labour for Use and waste of formwork to rough faces of walls, retaining walls,abutments and similar work including attached pillasters,buttresses,etc complete all as specified and directed.

Material & Labour for Use and waste of formwork to fair faces of walls, retaining walls,abutments and similar work including attached pillasters,buttresses,etc complete all as specified and directed.

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement including forms, moulds, stopped ends etc all as specified and as directed.

Ditto- Add or deduct for each 25mm girth or part thereof over or under 30cm girth .

Boulder filling as in weep holes with gauge 40 to 80mm,hand packed tightly all as specified and as directed.

Material and Labour for cleaning the chocked soakage of manholes of any size and depth and removing scum/sludges to a distance exceeding 250m and n.exc 500m and cleaning with fresh water by taking out carefully cover slab placing in position including setting the cover slab in cm 1:6 complete all as specified and as directed

Material and Labour for cleaning of blocked CI pipe line 100 mm bore, carefully in between manholes using splited bamboo, cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete

Material and Labour for cleaning of blocked CI pipe line 150mm bore, carefully in between manholes using splited bamboo cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete.

Cleaning of blockage manually by rodding, pumping, etc. and removing the deposited sludge/solid/liquid material, outside MD land, complete all as directed from the following: - (a) Water closet any description including trap and CI pipe line upto first manhole

(b) Floor trap/Nahani trap upto & including gully trap

(c) Pipe from gully trap upto first manhole (excluding gully trap)

Material and Labour for two coats of synthetic enamel painting over a coat of pink primer incl preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth all as specified and as directed.

Material and Labour for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Material and Labour for preparing new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer all as specified and as directed.

Material & Labour for preparing new plastered surfaces and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

Material and Labour for hardcore of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick watered and rolled/rammed to a true surface all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour for coloured glazed ceramic tiles 250 x 375 x 7 to 8mm / 300 x 450 x 7 to 8mm thick in vertical surface, set and jointed in neat cement slurry & pointed with white or coloured cement to match the shade of the tiles complete all as specified and directed.

Material & Labour for Vitrified ceramic tiles 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement match to the shade of tile complete all as specified and directed. Note : The tiles shall be matt finish, shade of the tile shall be as approved by the GE and as per the latest catalogue of the Manufacturer.

Material and Labour for screed bed or bedding layer of mortar 15mm thick in cement plaster 1:6 for laying floor finishes as directed and as specified.

Material and Labour for Rendering 10mm thick in CM 1:4 on brick work or concrete ruogh finished surfaces as backing coat complete all as specified.

M&L PCC 1:2:4 (12.5mm graded Stone Aggregate) 40mm thick as in Flooring, etc., finished Concrete Surfaces Even and rough, complete all as specified and as directed.

NOTE : An Amount of Rs 19,845/- towards Schedule of Credit shall be deducted to arrive the Contract Sum

MAHESWARI CONSTRUCTIONS

M/S Sudhir Kumar Gupta