SE/GC/TIN/C33/2019-20

Amount

Dismantling the existing damaged wooden doors, windows and ventilators including frames, hinges and fastening including cost of lead, lift etc., complete.

Dismantling the existing damaged cement mortar flooring including cost of lead, lift etc., complete.

Brickwork in CM 1:3 mix using II class chamber burnt brick of size 9"x4 3/8"x2 3/4" including cost of all materials, labour, lead, lift, curing etc., complete.

Supplying and fixing in position single leaf half weld mesh 25x25mmx10Gauge and half MS sheet door of required size with 35x35x5mm ISA for outer frame and 25x25x5mm ISA angle for shutter frame and braced with 20x5mm flat as per specification including concreting, plastering for re-fixing in place, cost of all materials, necessary fittings, aldrop, tower bolt, handle, lead, lift etc., complete. (0.95x1.95m)

Supplying and fixing in position of Double leaf door of required size with 35x35x5mm ISA for door frame and 25x25x5mm ISA angle for shutter frame, 25x4mm thick flat bracing as per specification including cost of all materials, necessary fittings, aldrop, tower bolt, handle, lead, lift etc., complete. (0.95x1.95m)

Supplying and fixing in position of single leaf MS sheet door of required size with 35x35x5mm ISA for outer frame and 25x25x5mm ISA angle for shutter frame and braced with 20x5mm flat as per specification including concreting, plastering for re-fixing in place, cost of all materials, necessary fittings, aldrop, tower bolt, handle, lead, lift, etc., complete. (0.75x1.80m)

Supplying and fixing in position of single leaf 18mm thick plain cement sheet door with required size of aluminium channel with 35x35x5mm ISA for outer frame including cost of 2ft door flat, necessary fittings, 8" aldrop, bolt & nut, screw, handle, as per specification, including necessary lead, lift, etc., complete. (0.75x1.83m)

Supplying and fixing in position of four/two part weld-mesh 25mmx25mmx10Gauge and MS sheet covered grill window of required size with 35x35x5mm ISA for outer frame and 25x25x5mm ISA for shutter frame and braced with 20x5mm flat as per specification including concreting, plastering for re-fixing in place, cost of all materials, fabrication charges, transporting charges, lead, lift etc., complete.

Floor finishing with cement mortar 1:3, 20mm thick including cost of all materials, labour, lead, lift, tools and plants etc., complete.

Removing the existing door shutter before laying of tiles and re-fixing the door shutter in position after the tile is laid, making necessary alteration for reducing the height in the shutter including cost of labour, lead, lift, T & P, etc., complete.

Paving the approved quality of vitrified tiles of size 600x600x8mm over a base layer of cement mortar 1:3, 20mm thick and pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift, etc., complete.

Paving the approved quality anti skid ceramic tiles of size 305x305x6mm, over a base layer of cement mortar 1:3, 20mm thick and pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift etc., complete.

Dadooing the wall with best approved quality glazed tiles of silze 300x200x6mm, over a base layer of cement mortar 1:3, 12mm thick and pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift, etc., complete.

Plastering with CM 1:5 mix 12mm thick for wall including cost of labour, materials, lead, lift, curing, etc., complete.

Plastering with CM 1:3 mix 12mm thick for ceiling/water tank wall including cost of labour, materials, lead, lift, labour, curing etc., complete.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD-70).

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD.65).

Supply and fixing of TNEB meter Board suitable for 32A single phase service connection with 1 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1"x1/8" copper flat) and phase bulb on TW plank of size 600mmx450mmx19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.

Supply and fixing of 32 Amps DP switch of 500V with metal clad with fuse and neutral (side handle) on suitable TW Board, with earth connection only. (S.D-144)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed Sc Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch, covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point (For electronic regulator)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box. (SD-133)

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box with 3mm thick Hylem sheet cover for 15A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Supplying and fixing box type 4'x40W flouresent fittings complete with copper choke and condenser, (one number 4'x40W tube) with T.W round block on wall or ceiling with PVC unsheathed leads from terminals to the fittings.

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton/K.Lite) suitable for incandescent lamp with 60W bulb. (SD-80)

Supplying and fixing of 230mm SL Bracket with ISI fancy shade approved by Engineer at site with 1 No. 18W CFL bulb. (SD-82)

Earthing as per P.W.D standard with an earth electrode of 2m class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. (SD-228)

Supplying and fixing in position of 15mm dia brass screw down bib cock of best quality including cost of materials lead, lift, labour etc., complete.

Cuddapah slab sink of size 600mmx450mmx200mm with 32m dia 'B' class GI waste water pipe & 32mm dia C.P. waste coupling including cost of materials, lead, lift, labour etc complete.

Supplying and fixing of Anodised Aluminium Towel rail 60cm long and 20mm dia with Brackets including cost of materials, lead, lift, labour etc., complete.

Supplying and fixing of 75mm dia PVC pipe including PVC bend, Elbow wherever necessary, cost of all materials, lead, lift etc., complete.

Providing and fixing in position Indian water closet ORISSA PAN of size 580x440mm white glazed of approved make with ) or S trap conforming to IS 2556 part XII (parryware or equivalen with snad cushion and forming flooring around the closet using 40mm broken brick jelly concreted 1:2:5, 100mm thick and finishing the top to required slope including cost of all materials, lead, lift etc., complete. ( 1 Set)

Supplying and fixing in position PVC Nahini Floor Trap of approved make and quality and size 100x75mm fixed over a bed of brick jelly lime concrete and finished with CM 1:3, and fixed stainless steel grating including cost of all materials, labour, lead, lift, T & P etc., complete

Supplying and fixing of 110mm dia PVC pipe including PVC bend, Elbow wherever necessary, cost of all materials, labour, lead, lift, labour, etc., complete.

White washing one coat with shell lime including cost of all materials, labour, lead, lift, T &P, etc., complete.

Colour washing two coats using oil bound distemper over one coat of white cement primer for inside the room wall including cost of all materials, labour, lead, lift etc., complete.

Painting 2 coats of approved quality of enamel paint over a primary coat for all exposed faces of new/old steel doors & windows and grill etc including cost of all materials, scrapping, labour, lead, lift etc., complete.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost all materials, lead, lift, cost of binding wire etc., complete.

Supplying and fixing precast RCC 1:1.5:3 slab for man hole cover including all cost of materials, lead, lift, labour, etc., complete. (excluding steel reinforcement).

GST 12% as per Govt. Norms

Sp Constructions

N KANTHASAMY