Tender Notice No. 03/SE/2020-21, Lot No. 02

Amount

Construction of granular sub-base by providing well graded material as per specification of Marihan quarry,spreading in uniform layers with motor grader on prepared surface ready mix material at OMC and compacting with smooth wheel roller to achieve the desire density, complete as per MORT&H Specification No. 401

Providind, laying, spreading and compacting stone aggregate of 63mm to 45mm size to WBM II specification including spreading in uniform thickness, hand packing, rolling with three wheeled steel/vibratory roller 80-100 kn in stage to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density. As per technical specification clause 405

Providind, laying, spreading and compacting stone aggregate of 53 mm to 22.40 mm size to WBM III including spreading in uniform thickness, hand packing, rolling with three wheeled roller 80-100 kn in stage to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density.Grading 3 as per technical specification claus 405 (W.B.M.)

Providing and applying prime coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying emulsion at the rate of 0.70 kg/sqm using manual Mechaincal Means. As per technical specification clause 502.

Providing and applying tack coat with bitumen VG-10 using bitumin pressure distributer at the rate of 0.35kg per sqm in the norms bituminious/ granular surface cleaned with hydraulic broom. As per technical specification No 503.

Providing Laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm & 11.2 mm dala aggregate either using 80/100 penetration grade bitumen VG-10 @ 1.46 kg per Sqm.To required line, grade and level to serve as wearing course on a previously prepared base. Including mixing by mixol laying and rolling with a three wheels 80-100 KN static roller capacity, as per technical specification clause (including cost of bitumin)

Providing and laying of seal coat sealing the voids in a bituminious surface laid to specification to the specified levels, grade & cross fall using type c as per techinical Specification Clause 510.

Earth work in filling for widening of sone pump canal including cost of all labour, material and T&P, required for proper completion of work. With proper dressing etc.

Maa Mundheshwari Construction

M/s Chakra Sudarshan