Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Documents found in Order |
Tender Value
₹4.1 L
EMD Value
₹8,287
Closing Date
13 Aug 2026, 11:00 amClosed
AC(Electrical) FTR HQ BSF RAJASTHAN
AC(Electrical) FTR HQ BSF RAJASTHAN, Mandore Road, Jodhpur
S/I/T/C of Independent Power supply to Cobra Wire and Surveillance equipments system installed at BOP Sabari of 38 BN BSF (as a Pilot Project) of SHQ BSF JSMR(N) Ftr HQ BSF Rajasthan
2026_BSF_920713_1
20/AC(E)/FTR-RAJ/2026-27
Open Tender
Electrical Works
Item Rate
60 days
BOP Sabri, 38 BN BSF
Please refer Tender documents.
13 documents required · 13 mandatory
₹0
₹8,287
Yes
19 Aug 2026
5 Aug 2026
14 Aug 2026
5 Aug 2026
13 Aug 2026
5 Aug 2026
5 Aug 2026 - 13 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Desigining,Fabrication Supply/ installation/ testing and commissioning of outdoor type Automatic Light Panel ,double door (front & back openable door) of size 600 mm (H) x 600 mm (W) x 350 mm (Deep), made out of 2 mm thick CRCA powdered coated sheet alongwith Al busbar having interconnection with 10 sqmm FRLS/HFFR Copper wire including insulators, lugsDin Rail, connector etc. The feeder should have mounting stand made up off 35 x 35 x 5 mm angle iron duly primer and painted with 900 mm long legs (450 mm above the ground) including fixing the panel in suitable cement concrete foundation alongwith arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. (CPRI Approved builder), including Providing and fixing of following accessories and switchgear as per technical specifications etc. complete as required :-
(i) 4 Pole, 40 Amp, 10 KA (breaking capacity) MCB make Schneider/Havells/L&T or equivalent make- 1 No
(ii) 3 Pole, 40 Amp Contactor with 220 V AC Coil of Schneider make (Model-LC1D40AM7) or equivalent make - 1 No
(iii) Add ON Block of Schneider make (Model-LADN11) or equivalent make - 1 No
(iv) 230 V AC Phase indicating lamps of make Schneider/Havells/L&T or equivalent make
(Red,Yellow and Blue )- 1 Set
(v) 6 Amp, 10 KA C Curve MCB for control of make Schneider/Havells/L&T or equivalent make - 3 Nos
(vi) Selector Switch of Make Surdhi/Salzar or equivalent make - 1 No
(vii) 230 V AC Timer Switch with LCD display, Contact Rating- 16 A @ 250 V AC of Make Selec (Model- ATSM1) or equivalent make - 1 No
(viii) 600 VA UPS having input Voltage range - 140-300 VAC, battery of capacity 12 V 7.2 AH of Make Luminous (Model-LB600UNO) of equivalent make.
(ix) ON-OFF Indication Light (RED-GREEN) of Make Schenider or Equivalent - 1 set | 1 | Job | - | - |
| 2 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. | 2 | Each | - | - |
| 3 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. | 5 | Mtr | - | - |
| 4 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required | 5 | Mtr | - | - |
| 5 | Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.. (ISI marked Make Havells /Polycab/ Finolex /KEI /RR Kabel) (i) 2 x 10 sqmm | 60 | Mtr | - | - |
| 6 | Desigining,Fabrication Supply/installation/testing and commissioning of outdoor type Automatic Light Panel , double door (front & back openable door) of size 400 mm (H) x 400 mm (W) x 250 mm (Deep), made out of 2 mm thick CRCA powdered coated sheet alongwith Al busbar having interconnection with 10 sqmm FRLS/HFFR Copper wire including insulators, lugsDin Rail, connector etc. The feeder should have mounting stand made up off 35 x 35 x 5 mm angle iron duly primer and painted with 900 mm long legs (450 mm above the ground) including fixing the panel in suitable cement concrete foundation alongwith arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. (CPRI Approved builder), including Providing and fixing of following accessories and switchgear as per technical specifications etc. complete as required :-
(i) Single Phase Hooter of Quick Sense/reputed or equivalent make - 1 No
(ii) Auxiliary Contactor 220 V AC of Schneider Make(Model-CAD32M7) or equivalent make -04 Nos
(iii) 6 Amp SMPS 12/24 Volt DC of Omron Make (Model-S8FS-C07512) or equivalent - 1 No
(iv) 6 Amp, 10 KA C Curve MCB for control of make Schneider/Havells/L&T or equivalent make - 3 Nos | 1 | Job | - | - |
| 7 | Desigining,Fabrication Supply/installation/testing and commissioning of compartmentalised type outdoor feeder pillar, double door (front & back openable door) of size 800 mm (H) x 700 mm (W) x 450 mm (Deep), made out of 2 mm thick CRCA powdered coated sheet having 250 amps, 04 nos insulated aluminium main bus bars and 60 A Sub bus bar with colour coated heat shrinkable sleeves for interconnection including bus bar insulators, Wires, lugs Din Rail, connector etc. The feeder should have mounting stand made up off 50 x 50 x 5 mm angle iron duly primer and painted with 900 mm long legs (450 mm above the ground) including fixing the panel in suitable cement concrete foundation alongwith arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. (CPRI Approved builder), including Providing and fixing of following accessories and switchgear as per technical specifications etc. complete as required :-
(i) 4 Pole, 63 Amp, 25 KA (breaking capacity) thermal magnetic MCCB with spreader and extended roary handle of make Schneider/Havells/L&T or equivalent make- 1 Set
(ii) Auxiliary Switch Changeover of make Schneider/Havells/L&T or equivalent make - 1 No
(iii) 220 V Shunt Coil of make Schneider/Havells/L&T or equivalent make - 1 No
(iv) Manually operated 4 Pole, 415 V , 50 Hz, 250 Amp changeover switch with rotary handle in open execution of make Hager/Socomec/Havells/L&T or equivalent make - 1 No
(v) 6 Amp, 10 KA C Curve SP MCB for control of make Schneider/Havells/L&T or equivalent make - 8 Nos
(vi) 230 V AC Phase indicating lamps of make Schneider/Havells/L&T or equivalent make(Red,Yellow and Blue )- 2 Sets
(vii) Network analyzer meter with LCD Screen, 16 MB internal memory for wide range of I/O solution, current and voltage unbalanced measurement with detailed measurement of 51 Harmonics, 256 event log with IP 54 protection of Entes Make (Model-MPR-45) or equivalent make - 1 No
(vii) Control relay for Network analyzer meter of Entes Make (Model-MM002) or equivalent make - 1 No
(viii) CT of Ratio 60/5 of Make-Procom/Siemens/ABB or equivalent make - 3 Nos | 1 | Job | - | - |
| 8 | Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.. (ISI marked Make Havells /Polycab/ Finolex /KEI /RR Kabel) (i) 3.5 x 25 sqmm | 25 | Mtr | - | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.69 MB
BOQ_967547.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .