Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹42.7 L+₹1.2 L (2.85%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹43.7 L+₹2.2 L (5.39%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹45.7 L+₹4.3 L (10.3%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
1 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
Special repair to bldg No T-32, T-33 and P-3 (OR Md Accn) and provn of certain sanction works under AGE B/R Dett-B and AGE E/M of GE 862 EWS
2023_MES_578807_1
GER-76/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
Class D a(i)
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹95,000
Yes
10 Mar 2023
3 Feb 2023
3 Mar 2023
3 Feb 2023
1 Mar 2023
16 Feb 2023
Amount
Sch 'A' Part-I (B/R works) Excavating in over area n.exc 1.5m wide and n.exc 1.5m in depth in hard soil and getting out, complete, all as specified and directed.
Description all as per Serial item No 02 above, but depth exceeding 1.5m and not exceding 3.00 m, complete, all as specified and directed.
Excavating in over area n.exc 1.5m wide and n.exc 1.5m in depth in hard rock and getting out, complete, all as specified and directed.
Description all as per Serial item No 03 above, but depth exceeding 1.5m and not exceding 3.00 m, complete, all as specified and directed.
Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth in hard and dense for foundation, etc, or for shafts, wells, drain pipes n.exc 10 Sqm on plan and getting out, complete, all as specified and directed.
M&L for reinforced cement concrete M-30, (design mix) (20mm graded crushed stone aggregate) as in foundation, raft footing, base of column etc including mass concrete, complete all as specified and directed
M&L for reinforced cement concrete M-30, (design mix) (20mm graded crushed stone aggregate) as in basement slab, bases of column etc of static water tank, complete all as specified and directed
M&L for reinforced cement concrete M-30 (design mix) (20mm graded crushed stone aggregate) as in circular vertical wall, base slab and etc of static water tank, complete all as specified and directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for mild steel TMT bars 5 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
S&F for PVC water bars (D-19) of 3-4 mm thick and 190mm wide fixed in reinforced cement concrete wall joints continously of approved make complete as per specified and directed by Engr-in-Charge.
Formwork to faces of circular walls, retaining walls, abutments, and similar work, complete all as specified and directed
M&L for providing water proofing treatment to static water tank complete all as per the following specification:- (i) Providing 15mm thick cement plaster in cement mortar 1:3 in mixed with pidiproof LW of Dr. Fixit @ 200 ml per 50 Kg of cement and finished even and smooth surface without using extra cement over two coats of cement slurry mixed with super latex of pidilite in proportion 1:4:7 (Super Latex : Water : Cement). (ii) Application of one coat of polymer modified bituminous elastomeric waterproof coating i.e. proof coat black of pidilite @ approx 0.50 Kg per Sqm for two coats of 300 micron each. (a) The rate includes of preparation surface treatment and sealing of all joints, cracks, corners and junctions of pipes etc and ponding test complete all as specified and directed by Enge-in-Charge. Note: Water proofing compound shall be measured and paid separtly under respected item.
Supply only water proofing liquid compound from Dr. fixit, completed all as specified and directed
M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 100mm bore CI pipes with flanged ends centrifugally cast Class 'A' in any length laid in trenches, complete all as specified and directed.
M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in sub base of flooring, finished the surface even and fair with using extra cement, complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block of any shape and size approved by Engineer-in-Charge , ISI marked (IS:15658-2006) 80mm thick, M-35 grade (Heavy Traffic), in paths and hardstanding,with grey cement, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, complete all as specified and directed. (Note: 20% coloured interlocking paver block with colour pigmant and 80% grey cement interlocking paver block with no pigment are used as directed by Engr-in-Charge).
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick ,complete all as specified and as directed.
Removing excavated material ,not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting poin, complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregates as in sub base, foundation, filling and mass concrete complete all as specified and directed.
M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-1 (20mm graded crushed aggregate ) as in bond stone in stone walling set in Cement mortar 1:6, complete all as specified and directed.
M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds with maximum depression on face from straight edge held against the dressed surface n exc 40 mm for lime or sand stone and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in apex stone, coping, benching, hold fasts, water troughs, bed block, surface channel and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work ,complete all as specified and directed.
M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar (1:4) complete all as specified and directed.
M&L for broken or boulders hand packing (any thickness) at back of well over arches etc and raising (for lowering) to the reqd level, complete all as specified and directed
M&L for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber joint laid in trenches or floor or as in weep hole, complete all as specified and directed.
M&L for use and waste of formwork to sides of concrete foundation, footing, bases of colums, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar work, in rough finished flat surface of concrete, complete all as specified and directed.
M&L for reinforced cement concrete M-30 (design mix) (20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns and the like, complete all as specified and directed
M&L for reinforced cement concrete M-30 (design mix) (20mm graded crushed stone aggregates) as in columns, pillars, piers, post, struts and the like, complete all as specified and directed
M&L formwork to soffits of suspended slabs such as roof slabs, landings and similar work; n exc 200mm thick (Horizontal and sloping) for rough finished surface of concrete, complete all as specified and directed.
M&L for reinforced cement concrete M-30 (design mix) (20mm graded crushed stone aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed
M&L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,for rough finished surfaces of concrete, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening, complete all as specified and directed.
M&L for Machine cut kota stone slab(polished) flooring 20-25mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:4) of any size complete all as specified and directed.
S&F for anodised aluminium, power coated (minimum thickness of power coating 50 micron) as in frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
S&F for anodised aluminium (minimum thickness of power coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hinges type B-21 100mm long (2 no.) suitable handle (1No), complete all as specified and directed.
S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares exc 0.50 sqm in each pane, complete all as specified and directed.
Hacking out old broken glass any thickness size, quality or description from wooden or steel frames glazed with putty/beads, complete all as specified and directed.
Surface dressing n exc 15cm deep and getting out in soft / loose soil, complete all as specified and directed.
M&L for 100mm thick plain cement concrete 1:2:4,, type B-2 using 40mm graded stone aggregates as in sub base, complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-1 using 20mm grade crushed stone aggregate as in quoilin blocks, strings, courses, copings, kneelers, apex stone pier cape, bed plates, ancho-rage blocks, bounders, cerbels, brackets etc and the like including weathering slightly rounded or chamfered aganles and throating in cement mortar 1:4 ,complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each, complete all as specified and directed.
S&F for anodised aluminium (minimum thickness of power coating 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc. complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for complete removal of existing treatment surface of wall and applying two coat of distumper oil emulsion over two coat of 3mm thick wall care putty, complete all as speicied and directed.
M&L for 3mm thick wall care putty on wall surface, complete all sepcified and directed
M&L for preparation of new wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc ) or insulation oards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed.
S&F for 12mm thick gypsum board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour. All joints shall be sealed and complete ceiling will be finished with wall care putty and two coats of smooth surface oil bound distemper of approved and shade all as per insturctions including dismantling of existing board etc, complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided including existing water proofing treatment, complete all as specified and directed.
M&L formwork to side and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc to obtain fair finished surface, complete all as complete all as specified and directed.
M&L for providing reinforced cement concrete M-30 (design mix) (20mm graded crushed stone aggregate) as in beams, cantilevers, brassummers, lintels over 1.5m span, complete all as specified and directed
M&L for laminated wooden flooring with planks having technical specifications such as water proof, termite proof, resilient and durable, impact absorbtion of samples of design to be approved by Engr-in-Charge, complete all as specified and directed
S&F for stainless steel curtain rod of 20mm dia, complete all as specified and directed.
S&F for bracket and finials of stainless steel of 'T' and 'L' type (colour and design approved by GE) curtain rod stainless steel 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) complete as in repair all as specified and directed .
S&F in repair for decorative curtain rod of 20mm dia, complete all as specified and directed.
S&F in repair for bracket and finials of fancy type (colour and design approved by GE) curtain rod powder coated 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) complete as in repair all as specified and directed .
M&L for wooden door / partition for scrapping of existing surface, filling with putty and levelling the existing surface and two coat of mattle finished polish of colour as directed by Engr-in-Charge, complete all as specified and directed by Engr-in-Charge.
S&F for decorative POP cornice (Cast in Site) moulding, fluting etc from size 4"x4" to 6"x5" as per approved design and drg with all tools, plants, labour and materials, complete all as specified and directed.
S&F for double door shutter 10mm thick tuffened glass with 2 Nos Ace of spade one on each shutter and including fancy type long handle 4 Nos, heavy duty floor spring , complete all as specified and directed by Engr-in-Charge.
Mild steel for framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with end including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and duides) and fixing, complete all as specified and directed.
S&F for rolled mild steel in joist, channel, agnle, or tee sections, fixed independently, without connecting plates, etc., (Cut to ordinary lengths i.e. within 20mm of the length as indicate) in Fe-290 Gde E-165 quality 'B', complete all as specified and directed.
M&L for preparation of new steel surface exc 10 cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Chagre.
S& F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvinsed wire staples , complete all as specified and directed.
M&L for mild steel plain black sheet in wall cladding, steel gates and similar work cut of size holes punched including round headed screw clout nailsa or rivet and fixed to steel framing with plain 40mm lap joints with riveted or welded seams inlcluding bending or turning up mitred angles etc as required 1.25mm thick sheet, complete all as specified and directed.
M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for pre cast chhanal cover, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality comfarming to Fe-410-W, grade E-250, complete all as specified and directed.
M&L for providing pre-cast cement concrete landing cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1 using 20mm grading stone aggregate and setting in cement morter 1:6, complete all as specified and directed
S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches and including camps or in floor, or as in weep hole complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.
S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor, or as in weep hole complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.
S&F for 1mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed
Complete removal of existing treatment of old plastered surface of walls, preparing surface including washing rubbing down and stopping of distemper surface and applying two coats of distemper oil emulsion over one coat of chalk whitening, complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 350x250x7mm / 450x350x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:3, complete all as specified and as directed.
M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:4) complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level complete all as specified and directed.
M&L for 75mm thick plain cement concrete, type C-1, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.
M&L for prepartion of old decorated plastered surface in ceiling etc by brooming down with steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy oil and greasy spots and applying one coat of white wash, complete all as specified and directed.
Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each and removing complete all as specified and directed.
S&F for pressed steel door frame of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-0 using 12.5mm graded stone agregate complete all as specified and directed.
S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete but without glazing bars, dovetailed or welded complete all as specified and directed.
S&F for factory made 30 mm thick 2nd class soft wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed.
S& F in reapir for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvinsed wire staples , complete all as specified and directed.
S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2010 complete all as specified and directed.
M&L for preparation of old wooden surface exc 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old steel surface exc 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
S&F for 100mm long butt hinges medium weight cold rolled mild steel , complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.
S&F for extruded aluminium alloy handles size 125 mm fabricated type anodised (ISI marked), complete all as specified and directed.
M&L for 300mm long (lenth of bolt) aluminium alloy, anodised, sliding door bolt with hasp, stapl (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruced sections or cast aluminium alloy anodised (ISI marked) complete all as specified and directed.
S&F 140mm long floor door stopper of aluminium alloy anodised body and tongue with hard drawn steel spring, complete all as specified.
S&F for 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down old unserviceable GI pipe of 15mm dia with all fittings etc complete all as specified and directed.
S&F for 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down old unserviceable GI pipe of 20 mm dia with all fittings etc complete all as specified and directed.
M&L in repair for bib tap cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe, suitable for 15 mm bore ,complete all as specified and directed.
M&L in repair for 15mm bore stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type,screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
M&L in repair for 15mm bore gun metal, gate/globe valve with iron wheel head screwed on both sides for iron pipes, complete all as specified and directed.
M&L in repair for 20mm bore gun metal, gate/globe valve with iron wheel head screwed on both sides for iron pipes, complete all as specified and directed.
S&F in repair for sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as in repair all as specified and directed.
S&F in repair 32mm dia waste coupling PTMT (half or full threaded), minium weight 60 gms) fixed to stainless steel sinks, complete all as specified and directed.
S&F in repair for chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised including one pair of brass chromium plated brackets, complete all as specifed and directed.
S&F in repair for chromium plated brass shower rose of size 125 mm with swivel joints fixing to steel pipes etc. Complete as in repair all as specified and directed.
S&F in repair for 125 mm dia PTMT grating doom with waste hole for waste pipe (minium weight 40 grm), complete all as specified and directed.
S&F in repair for PVC connection 15 mm x 600 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.
S&F in repair 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repair vitreous China wash basin, white, flat back, size 550x 400mm including waste coupling waste pipe and brackests, complete all as specified and directed.
S&F in repair for 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for soap dish holder complete as in repair as specified and directed by Engr-in-Charge.
S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete all as specified and directed.
S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe of polytheane PVC 32mm dia, complete all as specified and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed, complete all as specifed and directed.
M&L for 75mm bore outlet cast nahani floor trap, with grating including jointing to waste pipe fixed in, complete all as specified and directed.
M&L for steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.
M&L for chequered cement concrete tiles of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured cement to match the shade of tiles laid over and including 20 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.
M&L for complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cement mortar 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm. APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed.
Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications, complete all as specified and directed.
M&L for point wiring for one light point/fan point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable in and including non metalic rigid PVC casing caping medium grade of 25mm width complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the disturbed surfaces compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth)
Description all as per Serial item No 131 above but for one 3 pin 5 Amp socket outlet on independent board controlled by one 6 amp switch, complete all as specified and directed.
Description all as per Serial item No 131 above but for one 3 pin 6 Amp socket outlet on same board controlled by one 5 amp switch, complete all as specified and directed.
Description all as per Serial item No 131 above but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper cable with 2.5 sqmm single core multistraind FRLS copper cable as earthling lead complete all as specified and directed.
M&L for switch piano, flush type single pole, one way 5 Amp, 240 volts, complete all as specified and directed.
S&F for switch socket outlet combination 2 in 1, 5 pin, 5 amp flush type complete all as specified and directed.
M&L for switch socket outlet combination 2 in 1, flush type single pole, one way 5 &15 Amp, 240 volts, complete all as specified and directed.
S&F for ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 63.5 x 17mm terminals complete all as specified and directed.
S&F for ceiling fan regulator elctronic, flush type, hum free suitable to control speed of fan from 0 to 100% rotary type five step 240 volts AC complete all as specified and directed.
Supply and fixing in replacement Lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent fittings including LED lamp 7 / 9 watt complete all as specified and directed.
S&F for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height complete all as specified and directed.
S&F in repair for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed. (Note:- MCBs will be measured separately.)
M&L for MCB single pole & neutral 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L for MCB single pole, 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
Supply,laying, jointing and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).
M&L for 40mm dia galvanized steel tubing (light grade) with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connections, check-nuts, caps, plugs, diminishing pieces and flanges etc as in pole, crossing of roads, laid in trenches, fixed on walls for protection after dismantling of old unserviceable GI pipe of any type complete all as specified and directed.
S&F for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 13.5 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electrically using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete as in repair all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion including taking down existing unserviceable earthing complete all as specified. (Note:-Earth strip and protection pipe upto board is included in the rate quoted)
M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed (Note: Punned thickness of sand shall be measured and paid).
M&L for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mm x 115mm x 75mm, complete all as specified and as directed.
S&F for LED tube light fittings 1x10 watts, complete with 2 feet decorative ultra slim near LED lighting fixture with co extruded polycarbonate body, environmental friendly energy effcient ready to use complete prewire and connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete as in repair all as specified and directed.
S&F for exhaust fan of 250mm sweep, heavy duty, 1200 RPM electrical operated 230 Volts AC single phase with metal body with all accessories and louvers shutter complete all as specified and directed.
S&F for LED street light fitting 35 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lenses with IP 65, complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 Sqmm copper cable from connector to fitting and after taking down old unserviceable light fittings of any type ,complete all as specified and directed
M&L for sub main wiring complete with 2 run of 6 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC conduit of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 6 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items complete all as specified and directed. (Note : - 02 run of 6 sqmm single core copper conductor cable and 01 run of 6 sqmm single core copper conductor and 01 run of PVC conduit shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).
S&F in replacement for switch fuse unit TPN 500 volts, 3 phase with HRC fuses suitable for interior mounting in panel of capacity 250 Amp, complete all as specified and directed
S&F in replacement for MCCB FP 240 volts any rating from 63 Amp with ruptring capacity 10 KA, including providing thimble for out going cables complete as in repair all as specified and directed.
Supply,laying, jointing and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 sqmm 4 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).
S&F in replacement for micro process or based single phase electronic temper proof energy meter of rating 10 to 60 Amp with optical comunication port, confirming to IS: 13779 (old energy meter deposited to MES Yard), complete all as specified and directed.
M&L for GI bracket pipe of size 40mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type and the GI bracket shall be fixed on wall/pole surfaces by providing suitable MS iron 25x4 mm clams 2 Nos of 25 cm long duly to the bracket pipe and painting to MS clamps and fixing with necessary suitable nuts, bolts and washers complete all as specified and directed.
KANWAL KUMAR GUPTA
SUBASH CHANDER
M/s Anil Engineers & Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .