Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹22.9 LAccepted-AOC F NO 117 GROUND FLOOR SUN RISE APARTMENT PLOT NO 6 DWARKA NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹25.0 L+₹2.1 L (9.16%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹25.9 L+₹2.9 L (12.8%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹26.0 L+₹3.1 L (13.4%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹26.2 L+₹3.3 L (14.3%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
17 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
REPAIR TO MISC B/R WORKS TO OTM AND MARRIED ACCN IN RV, SV AND TECHNICAL AREA AF STATION PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2023_MES_590252_1
GENP-12/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹70,000
Yes
9 Aug 2023
19 Apr 2023
18 May 2023
19 Apr 2023
17 May 2023
4 May 2023
Amount
Demolition of cement concrete (un reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) including removing the debris from site to outside MoD land.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing including removing the debris from site to outside MoD land.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) not exc 15 cm thickness for landing, cooking platform and chajjas including removing the debris from site to outside MoD land.
Taking down cement or cement lime plaster on brick/ stone or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc upto 4th storey building including removing the debris from site to outside MoD land.
Demolition of brick work/ stone masonry built in cement or cement lime mortar including all quoins, arches, pillars etc of any description including removing the debris from site to outside MoD land.
Demolition of stone slab and tiles of any description or thickness in foor, aprons etc laid, bedded and pointed in any cement mortar including removing the debris from site to outside MoD land.
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.
M&L for brick work with sub class `B' bricks, straight or curved on plan in any radius in half brick thick wall built in cement mortar (1:4) all as specified.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 including finishing surface even and smooth without using extra cement .
M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings including finishing surface even and smooth without using extra cement .
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 including finishing surface even and fair without using extra cement but with liquid water proofing compound by weight as per manufacturer's instructions upto and including 4th storey bldg with necessary scaffolding . (Note : WPC will be measured and paid separately)
Supply only water proofing compound all as specified
M&L for 25mm thick cement concrete 1: 2 :4 type B-O (using 12.5mm graded stone aggregate) as in floor including finishing surface even and smooth without using extra cement .
M&L for coloured glazed ceramic tiles as in vertical surfaces of size 350x250x7mm/ 450x350x7mm thick (first quality) set and jointed in cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement mortar 1:4.
M&L for non skid coloured ceramic tiles (first quality) 7 to 8mm thick (squre or rectangular) area of each tile exc. 0.06 sqm but not exc 0.11 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over & including 15mm thick screed bed in cement mortar 1:6.
M&L for joint free non skid coloured ceramic tiles (first quality) 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over & including 15mm thick screed bed in cement mortar 1:6.
All as per item No 16 above but in skirtings laid over 10mm thick cement plaster in CM 1:4.
M&L for vitrified tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:6.
All as per item No 18 above but on vertical surface of wall, dado, skirting etc including 10 mm thick rendering in cement mortar 1: 4 all as specified.
M&L for 18-20mm thick granite (of jet black ) work (table rubbed and polished ) in steps ,jambs ,pillars,window cills, cooking plateforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in cement moratr 1:4 and making exposed edges to half round complete.
M & L for 75mm thick cement concrete 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection including finishing even and smooth surface without using extra cement and making joints 12 mm wide to the full depth of concrete at every 3 metres interval and at every change of direction and filling the same with bitumen (85/25 grade) sand mastic complete all as specified.
M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring including finishing even and smooth surface without using extra cement.
M & L for machine cut Kota stone slab 20 to 25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing laid on 20 mm thick screed bed in cement moratr 1:4.
M & L for machine cut Kota stone slab 20 to 25 mm thick as in steps, skirting, dado pillar etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing over and including 15mm thick rendering in cement mortar 1:4.
Form work to side and soffits of shelves, cupboard and similar work for rough finished surface of concrete.
M&L for reinforced cement concrete 1:1.5:3 type A-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings balconies, canopies, deck slabs and in shelves and similar work.
M&L for mild steel TMT bars 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping fo columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Taking down chowkats or frames with shutters (but without taking off shutters from the frames) area not exceeding 1.5 Sqm each.
Taking down chowkats or frames with shutters (but without taking off shutters from the frames) area exc 1.5 Sqm but not exc 4 Sqm each.
Taking down shutter of any discription area not exc 1 Sqm each.
Taking down shutter of any discription area exc 1 Sqm but not exc 2 Sqm each.
M&L for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Pa+nelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.
M&L for factory made pressed steel frames for doors with one or more rebates of size 105mm x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc. all as specified.
M&L for factory made pressed steel frames for doors with one or more rebates of size 125mm x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc. all as specified.
M&L for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in back filing to pressed steel frames complete all specified.
S&F for 35mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete.
S&F for 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated of second class hard wood.
S&F for 35 mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats of second class hard wood.
S&F in repair 25 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work including necessary continuous (piano) hinges, handle etc complete all as specified.
S&F for stainless steel wire cloth 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mm fixed with stainless steel wire staples.
S&F for 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21.
S&F for aluminium anodised, barrel tower bolts of extruded section of 150mm size.
S&F for cast type anodised aluminium handle of size 150 mm.
S&F in repair mild steel powder coated 20 mm dia curtain rod including brackets and end knobs / fineals complete all as spcified..
S&F for 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete.
S&F for anodised aluminium power coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc all as specified.
S&F for anodised aluminium power coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
S&F for anodised aluminium power coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & fixed with screws to timber frame complete
S & F in repair mild steel mortice lock vertical type size 100mm 4 levers.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
S&F for 4mm thick sheet glass, ordinary quality and glazing with oil putty and rubber bedding in square exc 0.5 Sqm in each pane.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete.
S & F in repair floor door stopper of size 140 mm long aluminium body and tongue, anodized with hard drawn steel spring fixed to door.
M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of wall primer.
M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of wall primer.
M & L for two coats of cement base paint after preparation of newly plaster surfaces of wall.
M&L for preparation of newly wood or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
Taking up or down 15mm bore steel tubing and connections in walls, ceilings, floors, etc including cleaning for re-fixing complete all as specified.
Taking up or down 20mm bore steel tubing and connections in walls, ceilings, floors, etc including cleaning for re-fixing complete all as specified
M&L for GI tubing 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete.
M&L for GI tubing 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete.
Fixing only GI water tubing of bore 15mm with all fittings and fixed complete to walls and ceiling or laid in floors.
Fixing only GI water tubing of bore 20mm with all fittings and fixed complete to walls and ceiling or laid in floors
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing girth not exc 10 cm in brick wall complete.
S&F in repair 15 mm dia bib tap, chromium plated, fancy type, long body screwed down, screwed for iron pipe or for brass ferrule and fixed.
S& F in repair 15 mm dia concealed stop cock, cast copper alloy, fancy type, chromium plated screws down high pressure screw both ends for iron pipe or for union.
S&F in repair stainless steel kitchen sink made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 495X420mm bowl size 410X330X160mm all as specified.
S&F in repair sink with drainage board made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915X460mm with bowl size 410X330X160mm all as specified.
M&L in repair 15 mm dia stop valve, chromium plated, cast copper alloy, fancy type screwed down high pressure with crutch or butterfly handle screwed both side for iron pipe.
S & F in repair CP Soap dish of Make-AKP-35731P of Jaquar or its equivalent in kohler/ Marc.
S & F in repair CP towel ring of Make-ACN-1121BN of Jaquar or its equivalent in kohler/ Marc.
S&F in repair 15 mm two in one angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make Jaquar or its equivalent in kohler/ Marc.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and seat cover) including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete.
S&F in repair vitreous china EWC Super constellation including cistern of size 83x37x66 cm 'S' trap as per Cat Part No 20040 (S-10/P-9) of Make Hindware or its equivalent in Cera/ Parryware.
S&F in repair water closet vitreous china squatting pan,Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) and including with 'P' or 'S trap including' provison of lime concrete bedding complete.
S&F in repair 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all specified.
S&F in repair 15mm dia angle cock,cromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed all specified.
S&F in repair sink mixer with swivel spout and 450 mm long braided houses chromium plated all as specified.Make : SOL-6319-B of Jaquar or its equivalent in kohler/ Marc.
S&F in repair basin mixer with popup waste system , Hot and Cold Facilites and 450 mm long braidaed hoses chromium plated complete all as specified. Model No- DRC-37005 B of Jaquar or its equivalent in kohler/ Marc.
S/F in repairs three way wall mixer with popup waste system , hot and cold facilites and 450 mm long braidaed hoses chromium plated Cat Part-No FUS-29273 UPR of Jaquar or its equivalent in kohler/ Marc.
S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed Cat Part-No : 563 of Jaquar or its equivalent in kohler/ Marc.
S & F in repair CP paper holder of Make-AKP-35751P of Jaquar or its equivalent in kohler/ Marc.
S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges including chromium plated brass screw and plastic cleats complete.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.
S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level 10 litre capacity , white, with inlet, ball valve, float and handle including brackets complete.
S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete.
S&F in repair brass chromium plated shower rose 125 mm size fixed to 15 mm bore iron pipe complete.
S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket gurard and railing 60cm long tixed to plugs with chromium plated brass screws complete.
S&F in repair wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium plated waste coupling 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer complete to walls all specified.
S&F in repairs elegent mirror PVC cabinet coloured with towel rail of size 422mm x 622 mm all as specified.
S&F in repair cast iron Nahani trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete.
S&F in repairs cast iron floor trap with CP grating including jointing to waste pipe with run lead, dia of outlet 100mm set in cement concrete type B1 (1:2:4) complete.
Demolition and breaking up drain pipe 75mm/100mm bore of salt glazed ware, AC or PVC of any type complete.
S&F for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified.
S&F for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified.
S&F in repairs PVC(SWR) bends any radius 75 mm bore.
S&F in repairs PVC(SWR) bends any radius 110 mm bore.
Dismantalling water tank of capacity exc 250 ltr and not exc 500 ltr complete.
Dismantalling water tank of capacity exc 500 ltr and not exc 1000 ltr complete.
M &L for 500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top), white, three layers, hoisted and fixed in position all as specified.
M &L for 750 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top), white, three layers, hoisted and fixed in position all as specified.
S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.
Dismantling of cast iron pipe of 75mm/100 mm bore jointed in cement mortar in any position complete.
S & F for cast iron (sand cast) soil, waste and vent pipe in any length with or without ears, with cement joints, laid in treanches or in floors of 75 mm bore complete.
S & F in repair cast iron bends (any radius ), diminishing pieces or tapers of 75 mm bore fitted with oval access door complete.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
Excavation in post holes each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with around earth in layers not exceeding 25 cm thick, watering and removing surplus spoil to a distance not exceeding 50 m and making good surface all as specified and as directed.
M&L for cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in foundations, filling and mass concrete.
S&F for mild steel work framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.
S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240.
Dismantling of mild steel corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified.
S & F for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
M & L for two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surface of any description over 10cm width or girth including preparation of surfaces.
Demolition of Concrete of any description and in any position not otherwise specifically provided for including removing the debris from site to outside MoD land.
M&L for cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in roof kerbs/gola or mud stops, rounded or chamfered on edges complete.
M & L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base, floor etc.
S&F for factory made chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors with grey cement and pigment over 20mm scread bed in cement mortar 1:6 all as specified.
S & F in repair corner glass shelf set of 3 Nos with bracket of Make-CAN-1173 of Jaquar or its equivalent in kohler/ Marc.
S&F in repair steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type including one shop coat of primer erected in position of thickness of laths 1mm complete.
M&L for 20 mm dia stop valve, cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both side for iron pipe or for union and fixed . Note for item No 1 to 125 :- (a) The site shall be handed over in piece meal (minimum 03 buildings/ Qtrs at a time). After completion of said buildings/ Qtrs, another buildings/ Qtrs shall be handed over to contractor for execution of work. The said buildings/ Qtrs (minimum 03 buildings/ Qtrs) shall be completed within 15 days by deploying sufficient trademen failing which a penal recovery of Rs 2000/- per building/ Qtr per week shall be recovered from the contractor's dues. (b) After execution of work in buildings/ Qtrs, entire cleaning including paint marks etc from window/ door/ glass panes shall be removed by the contractor in all respect. The quoted rate shall deemed to be included the above provision and nothing extra shall be paid on this account).
GIR RAJ BUILDERS
Kunal Construction Co.
VIJAY KUMAR GUPTA
Mahesh Enterprises
JAIPAL AND BROTHERS
M/S Parshant Associates
M/S Davinder Kumar
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .