REWIRING OF CERTAIN BUILDINGS AT MD/OTM ACCN AND ALLIED WORKS AT 7 AFH KANPUR CANTT

Amount

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose, pendant holder, fitting and fixtures, MCB DB’s, MCB, Main switches, call bell etc and making good to disturbed surface to wall, floor etc to match with existing surface either by using same colour distemper or white colour wash all as required and directed by the Engr-in-Charge.

Taking down care fully by unscrewing from boards /out let boxes, fittings and fixtures such as Tube light fitting /of any type / /MCB DB etc . Note : - This item to be operated only when item found serviceable for re-use in work complete all as specified and directed.

M&L for point wiring PVC FRLS insulated and unsheathed copper stranded conductor cable of size 1.5 Sq mm, 1100 V drawn in and including PVC casing and capping complete including cast iron/pressed steel terminal box 1.6 mm thick of required size Bakelite sheet 3mm thick for mounting switch, socket brass screws and washer including PVC insulated and unsheathed solid copper wire of size 1.5 Sq mm will be used as continuous earth wire for the following :-

One light / fan point controlled by one, one way switch

One 5/6 Amp socket on the same board with other switch

One 5/6 Amp socket on independent board.

One 3 pin 15 Amp socket independent but with 2.5 q mm PVC insulated unsheathed copper stranded conductor and earth wire with 1.5 Sqmm

One bell point controlled by one, one way bell push button.

All as per item No. 3.00 here-in-before above but concealed drawn in and including non metallic PVC conduit medium grade complete all as specified and directed:-

One light fan point controlled by one way switch.

One 3 pin 5 Amp socket on the same board

One 3 pin 5 Amp socket on independent board.

One 3pin 15 Amp socket independent but with 2.5 sq mm PVC insulated unsheathed copper stranded conductor and 1.5 Sq mm size PVC insulated soild copper conductor as earth continuity conductor.

One bell point controlled by one push bottom switch.

Fixing only any type of Tube light fittings obtained from Item No. 2 Above Including making connection to ceiling rose /connector with copper flexible cable of size 1.5 sq mm complete all as specified and directed.

S & F in replacement switch piano type 240 V, 5 Amp, Sp one way flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amps complete all as specified and directed.

S & F in replacement bell push 240 V, 5 Amp, Sp one way flush type complete all as specified and directed.

S&F in replacement of sheet metal enclosure for MCB DB TPN double door, 4 way complete with 200 Amps rated Bus bar complete all as specified and directed.

S&F in replacement of socket outlet combination multipurpose 3 Pin 5 Amp, 240 volt and with 2 pin 5 Amp outlet also flush type including for existing points also (non shuttered) complete all as specified and directed.

S&F in replacement of switch socket outlet combination 3 pin 15 Amp, 3 Pin 5 Amp outlet also flush type (non shuttered) including for existing points complete all as specified and directed.

S&F in replacement ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F for lamp holder metal cased body of brass with back plate complete with 5 Watt LED lamp complete all as specified and directed. Make C&S Cat Part No LTHPLEDLAMP5W/B22 or equivalent in Crompton Greaves/Philips/Bajaj

S&F in replacement sheet metal enclosures for MCB distribution board TPN 4 way double door type including with MCCB 4 Pole, 100 Amps, 16 KA fixed type as incomer with 200 Amp rated bus bar complete all as specified and directed.

S&F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 Amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed.

All as per item No. 15.00 here-in-before but SPN 4 way 240 Volt.

S&F Isolator TPN, 63 Amp 4 pole Isolator, 415 Volt complete all as specified in existing DB's in replacement and directed by Engr-incharge.

S&F in replacement Isolator SPN, 63 Amp, 240 Volt complete all as specified and directed.

S&F in replacement MCB SP upto 30 Amp, 240 Volt complete all as specified and directed.

S&F in replacement MCCB 4 Pole 16KA 100 Amps fixed type complete all as specified and directed.

S&F in replacement Isolator SPN, 20 to 40 Amp, 240 Volt complete all as specified and directed.

M&L for replacement of bell electric, 240 Volt, single pole complete all as specified and directed.

M&L for replacement of regulator Electronic type 240 Volt single phase suitable for ceiling fan step type complete all as specified and directed.

M& L for earthing complete with galvanized steel earth plate electrode 60cm x60 cm x6.0 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.50 Mtr below normal ground level connected to galvanized earth lead strip 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to earthing test point all as specified or indicated including testing on completion including PCC pit in (1:3:6) type C-2 cement concrete .RCC 1:2:4 Mix type B reinforced with 6mm dia MS bars @ 150mm RCC cover slab 40mm thick with two no’s fitting handle, GI pipe 20mm dia light grade with funnel & wire mesh for watering and 40mm dia light grade GI pipe for earth strip 4 mm protection etc. complete all as specified and directed by Engr-in-Charge.

M&L for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC Casing N Capping with all necessary fittings and accessories and run of PVC insulated and unsheathed single core cable with copper conductor of size 2.5 Sqmm as earth wire (green in colour) run through PVC Casing N Capping and connected to common earth dolly, including taking out the old sub main wiring all complete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run complete all as specified.

All as per item No. 25 here in before but 6 Sqmm, 2 single core with PVC FRLS insulated, unsheathed stranded copper conduct cable of size 4 Sqmm as earth lead complete all as specified and directed.

M&L for replacement of unserviceable bulk head fitting of any type with LED bulk fitting with 6 watt LED complete connection with copper wire 23/0076 two core from ceiling rose to bulk head fitting complete all as specified and directed. Make C&S Model No. CG801B6WLED or equivalent model of Philips/Wipro/CG.

M&L for replacement of unserviceable floodlight fitting with energy efficient light fitting LED street light 200 Watt LED complete with all accessories such as LED driver and testing complete connection with copper wire 2.5 Sqmm three core from pole box to street light fitting complete all as specified and directed. Make Crompton Greaves Model No. LSFO-200-CDL/60 or equivalent model of Philips/Wipro/C&S/Havells.

S & F in replacement of existing bed light fitting with LED type surface mounted decorative bed light fitting 10 Watt LED complete with all accessories such as LED driver, LED bulb/rod and LED batten with cover etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as specified and directed. Make Crompton Greaves Cat Part No LCL-10-CDL or equivalent of C&S/Philips/Wipro.

S&F in replacement of fluorescent tube light fitting complete powder coated CRCA Steel sheet housing T-8 LED integrated with Opal diffuser, LED Driver of constant current output, operating range 170-275 V and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as specified and directed. Make: Crompton Greaves/Philips/Bajaj.

M&L for replacement of existing unserviceable recessed mounted lumanaire with energy efficient 36 Watt LED type including making connection to ceiling rose with copper flexible wire of size 23/0076 complete all as specified and directed. Make Crompton Greaves model No. LCTLS-36-CDL or equivalent model of Philips/Wipro/ Havells/C&S

S & F in replacement of PVC insulated heavy duty electric unarmoured cable with solid aluminium conductor twin core 1100 Volts grade, cross sectional area 4 Sqmm complete all as specified and directed.

M&L for replacement of PVC laminated ISI marked top cover 3mm including cutting/drilling holes for mounting of switches, sockets etc. as per site requirement suitable for following size of sunken /TW board complete all as specified and directed:-

4"x4" size

7"x4" size

8"x6" size

8"x10" size

10"x12" size

S & F in replacement of modular switch 1 way 6 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F in replacement of modular switch 1 way 16 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F in replacement of modular bell push, flush type, 6 Amp, 1 module, 240 V complete all as specified and directed.

S & F in replacement of modular socket, 6A-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S & F in replacement of modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S & F in replacement of modular fan step regulator, 120 W, 2 module, 240 V complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 3 module complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 4 module complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 6 module, complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 8 module complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 12 module complete all as specified and directed.

S & F in replacement of modular metal flush box, 3 module complete all as specified and directed.

S & F in replacement of modular metal flush box, 4 module complete all as specified and directed.

S & F in replacement of modular metal flush box, 6 module complete all as specified and directed.

S & F in replacement of modular metal flush box, 8 module complete all as specified and directed.

S & F in replacement of modular metal flush box, 12 module complete all as specified and directed.

S&F in replacement of electronic ballast for 28 Watt tube light complete all as specified and directed. Make : Crompton Greaves/Philips/Havells

M & L for replacement of lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F Isolator TPN, 100 Amp, 4 pole Isolator, 415 Volt complete all as specified in existing DB,s in replacement and as directed by EIC.

S&F in replacement of electronic ballast 2 x 36 Watt for ceiling light fitting complete all as specified and directed.

S&F in replacement of LED integrated pattern T5, indoor decorative aluminium extruded LED fitting 20 watt, 4 feet complete including connection from ceiling rose to T5 LED light fitting with three core PVC flexible wire all as specified and directed. Make : Crompton Greaves/C&S/ Philips

S&F cirrus mini pro LED surface mounting luminaire with dimension of 312mm X 312mm suitable for porch complete all as specified and directed. Make : Philips Model No-SM200C LED16S 6500 PSU OD WH equivalent in Crompton/Bajaj

S&F in replacement of flexible wire 23/0076 copper conductor from ceiling rose to fitting/fixture complete all as specified and directed.

Taking down carefully storage type water heater (Geysers) 50/35/25 ltr capacity of any make by disconnecting electrically and mechanically from all existing lines, opening of bottom and top for inspection complete including base plate, heating element and copper tank etc. cleaning carefully and reassembling after necessary repair/replacement as specified here-in-after and replacement of old unserviceable nut/bolts and fixing in the same positioncomplete all as specified and directed. (Note :- replacement of old unserviceable part shall be measured and paid separately as supply only).

M&L for repair of copper/stainless inner tank for Geysers 25/35/50 Ltrs capacity by brazing/gas welding process of length n.exc 10 cm complete all as specified and directed at site the Engr-in-Charge.

Supply only glass wool for insulation of Geysers any capacity and any make complete all as directed by the Engr-in-Charge.

Supply only copper inner copper tank 25 Ltr capacity Geysers factory manufactured as approved by EIC/GE complete all as specified and directed.

All as per item No. 60.00 here-in-above but 35/50 Ltr capacity complete all as specified and directed.

Supply only stainless steel inner tank 25 Ltr capacity Geysers factory manufactured as approved by EIC/GE complete all as specified and directed.

All as per item No. 62.00 here-in-above but 35/50 Ltr capacity complete all as specified and directed.

Supply only heating element 1500 watts push type with gasket ISI marked complete all as specified and directed. Make- Theetha/Bajaj/Racold

All as per item No. 64.00 here-in-above but for 2000 watts complete all as specified and directed.

Supply only thermostatic switch suitable for Geysers of any make/type with temperature range adjustable type 25 to 80 degree centigrade superior quality 20 Amps 220 Volts AC supply complete all as directed. Make-Theetha/Bajaj/Racold

S&F non return valve, cast copper alloy ISI marked horizontal/vertical position suitable for any make any type of Geysers complete all as specified and directed.

Supply only indicator lamp 220 Volt AC supply rectangular/circular type as per sample superior quality with neon type lamp of red indicator complete all as specified.

S & F in repairs PVC insulated and sheathed copper conductor flexible cable of size 2.5 Sqmm for electrical connection complete all as specified at site by the Engr-in-Charge. Make- Havells/Finolex/Plaza

M & L for spray painting on 25 Ltrs capacity Geysers with one coat of synthetic enamel paint of white colour alter preparation of surface including and writing MES number with black synthetic enamel paint complete all as specified.

All as per item No. 70.00 above but 50/35 Ltr capacity complete all as specified and directed at site by the Engr-in-Charge.

Supply and fixing pressure release valve with inlet coupling ISI marked complete all as specified and directed at site by Engr-in-Charge.

S & F bottom split cover for terminal box in as per existing shape & size all as specified and directed at site by the Engr-in-Charge.

S & F indoor assembly suitable for 25 Ltrs capacity Geysers of any type made out of brass with inlet and outlet and fixing plate complete including gasket, nut bolts etc. as required and as directed by Engr-in-Charge.

All as per item No. 74.00 above but 50/35 Ltr capacity complete all as specified and directed.

S & F in replacement PVC connection of 450 mm long & 15 mm dia with brass nut at both end suitable for Geysers complete all as specified and directed.

S & F in replacement chromium plated copper pipe connection 450 mm long & 15 mm dia suitable for Geysers complete all as specified and directed.

Supply and fixing in repairs Bib taps suitable for bore dia of pipe in 15 mm, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs Stop valves, 15 mm Bore dia of pipe fancy type, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe fixed complete all as specified and directed.

Supply and fixing in replacement of Tubes 15 mm 'Medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete including taking down u/s pipes all as specified and directed.

Supply and fixing in replacement MCB SP 20 to 32 amps 240 V 10 KA complete all as specified and directed. Make- ABB/Havells/Indo Asian

S & F in replacement Metal clad single pole and a neutral enclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp, 240V complete all as specified and directed. Make- ABB/Havells/Indo Asian

S & F in replacement Metal clad triple pole and a neutral enclosure with a two pin and earth plug and socket with one single pole MCB TP 32 Amp, 240V complete all as specified and directed. Make- ABB/Havells/Indo Asian

M&L for servicing of solar water heater of capacity 100/200/300 Ltrs by taking down from roof of the building, disconnecting all electric and water connections, opening tank side covers and base plate, heating element and copper tank etc. checking of serviceability of all parts through well experienced technician, carry out cleaning and de-scaling of tank and copper tube using proper cleaning agents, cleaning of solar panel, checking of connections for smooth functioning and reassembling after necessary repair/replacement as specified here-in-after including fixing in the same position complete all as specified and directed. (Note :- replacement of old unserviceable part shall be measured and paid separately as supply only).

M&L for repair to un-serviceable solar panel for Solar water heater of capacity 100/200/300 Ltrs by opening the panel assembly, find out the defect on circuit, connections and terminals and carry out repair through well experienced technician, re-assembling and re-fixing at site and testing complete all as specified and directed.

Supply only heating element 2000 watts push type with gasket ISI marked for solar water heater as per sample all as specified and directed. Make- Theetha/Bajaj/Racold

Supply only thermostatic switch suitable for solar water heater of any make/type with temperature range adjustable type 25 to 80 degree centigrade superior quality 20 Amps 220 Volts AC supply complete all as specified and directed. Make- Theetha/Bajaj/Racold

M&L for sub main wiring with three runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC casing N Capping with all necessary fittings and accessories and 02xrun of PVC insulated and unsheathed single core cable multi stranded with copper conductor of size 4 Sqmm as continuous nuetral and earth wire (green in colour) respectively, run through PVC casing N capping and connected to the terminal and common earth dolly complete all as specified and directed. (Note. Four run of cable and one run of PVC casing and capping and one run of earth continuity wire shall be measured as one run complete all as specified.)

M&L in replacement of hot water pipe of 15 mm dia medium grade galvanised including taking down with and including all fitting insulated with 50 mm thick rock wool of density 48 Kg/Cum and covered with 26 SWG aluminium sheet cladding complete all as specified and directed.

All as per item No 89.00 here-in-before but size 20 mm bore complete all as specified and directed.

M&L in replacement of sub main wiring with PVC insulated unsheathed copper conductor cable of 2x2.5 sq mm + 1x1.5 sq mm earth wire drawn in and including PVC conduit for solar water heater all as directed by Engr-in- Charge.

S B ENTERPRISES

YS CONSTRUCTION

santosh electronics

H S ENTERPRISES

SHYAM AND SONS ENTERPRISES

SAKSHAM SUPPLIERS BUILDERS

Khalil Ahmed and Sons