Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.4 LAccepted-AOC | L1 | Accepted-AOC ok | |
| 2 | L2₹95.9 L+₹4.5 L (4.92%)Rejected-Finance | L2 | Rejected-Finance Reject | |
| 3 | Rejected-Technical | - | Rejected-Technical Enlistmnet of hte bidder expired on 31-03-2026, hence rejected | |
| 4 | Rejected-Technical | - | Rejected-Technical The Work Done certificate has not been satisfactory, Hence Rjected |
Tender Value
₹99.9 L
EMD Value
₹2.0 L
Closing Date
3 Apr 2026, 6:55 pmClosed
Executive Engineer HPPWD Shimla Division No. III
E. E. Shimla DIVISION NO. III, HPPWD, Shimla-3
Furnishing of VVIP Areas of Himachal Niketan at Dwarka Sector 19 New Delhi. SH Providing and fixing furniture articles and Curtains in VVIP area of Himachal Niketan at Dwarka Sector 19 New Delhi.
2026_PWD_132666_1
SD-III-23864-80dt.27-03-2026
Open Tender
Civil Works - Buildings
Percentage
60 days
Dwarka New Delhi
As Per SBD
14 documents required · 14 mandatory
₹2,000
₹2.0 L
24 Apr 2026
27 Mar 2026
4 Apr 2026
27 Mar 2026
3 Apr 2026
27 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supplying and placing at site a classical three-seater Sofa Set with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
| 2Supplying and fixing at site Centre Table of size 4’-0’’X 2’-0’’ with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
| 3Supplying and placing at site a classical Arm Chair with legrest with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
| 4Supplying and fixing at site TV console of size 1400x300x800mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
| 5Supplying and placing at site a classical Sofa Chair with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade and heavy gold paint at approved locations for highlighting detailing works including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
| 6Supplying and fixing at site Side Table of 400mm. dia. with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
| 7DINING AREA :- Supplying and fixing at site 8 seater dining table of size 4'x8' of required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica sheet and overlaid by italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) including inlay work of mother fo perls and polyster coating with minimum 2mm. thickness and corner italian stone moulding in pariferry all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
| 8Supplying and placing at site a dining chair without arm rest with deep carving works having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of dining chair with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
| 9Supplying and fixing at site TV console of size 1600x300x650mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including gold leafing paint on mouldings over desired locations including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
| 10TV LOUNGE:- Supplying and placing at site a classical Two Seater Sofa with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.45 MB
SBD9991048.pdf
Tender Documents • 11.90 MB
BOQ_196184.xls
BOQ • 0.38 MB
Annexure-A.pdf
Additional Documents • 3.76 MB
AdditionalconditionAnnexure-B.pdf
Additional Documents • 1.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .